kernel-aes67/drivers/clk/meson/a1-pll.c

361 lines
8.3 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2019 Amlogic, Inc. All rights reserved.
* Author: Jian Hu <jian.hu@amlogic.com>
*
* Copyright (c) 2023, SberDevices. All Rights Reserved.
* Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
*/
#include <linux/clk-provider.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include "a1-pll.h"
#include "clk-regmap.h"
#include "meson-clkc-utils.h"
#include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
static struct clk_regmap fixed_pll_dco = {
.data = &(struct meson_clk_pll_data){
.en = {
.reg_off = ANACTRL_FIXPLL_CTRL0,
.shift = 28,
.width = 1,
},
.m = {
.reg_off = ANACTRL_FIXPLL_CTRL0,
.shift = 0,
.width = 8,
},
.n = {
.reg_off = ANACTRL_FIXPLL_CTRL0,
.shift = 10,
.width = 5,
},
.frac = {
.reg_off = ANACTRL_FIXPLL_CTRL1,
.shift = 0,
.width = 19,
},
.l = {
.reg_off = ANACTRL_FIXPLL_STS,
.shift = 31,
.width = 1,
},
.rst = {
.reg_off = ANACTRL_FIXPLL_CTRL0,
.shift = 29,
.width = 1,
},
},
.hw.init = &(struct clk_init_data){
.name = "fixed_pll_dco",
.ops = &meson_clk_pll_ro_ops,
.parent_data = &(const struct clk_parent_data) {
.fw_name = "fixpll_in",
},
.num_parents = 1,
},
};
static struct clk_regmap fixed_pll = {
.data = &(struct clk_regmap_gate_data){
.offset = ANACTRL_FIXPLL_CTRL0,
.bit_idx = 20,
},
.hw.init = &(struct clk_init_data) {
.name = "fixed_pll",
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) {
&fixed_pll_dco.hw
},
.num_parents = 1,
},
};
static const struct pll_mult_range hifi_pll_mult_range = {
.min = 32,
.max = 64,
};
static const struct reg_sequence hifi_init_regs[] = {
{ .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x01800000 },
{ .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 },
{ .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x100a1100 },
{ .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x00302000 },
{ .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x01f18000 },
};
static struct clk_regmap hifi_pll = {
.data = &(struct meson_clk_pll_data){
.en = {
.reg_off = ANACTRL_HIFIPLL_CTRL0,
.shift = 28,
.width = 1,
},
.m = {
.reg_off = ANACTRL_HIFIPLL_CTRL0,
.shift = 0,
.width = 8,
},
.n = {
.reg_off = ANACTRL_HIFIPLL_CTRL0,
.shift = 10,
.width = 5,
},
.frac = {
.reg_off = ANACTRL_HIFIPLL_CTRL1,
.shift = 0,
.width = 19,
},
.l = {
.reg_off = ANACTRL_HIFIPLL_STS,
.shift = 31,
.width = 1,
},
.current_en = {
.reg_off = ANACTRL_HIFIPLL_CTRL0,
.shift = 26,
.width = 1,
},
.l_detect = {
.reg_off = ANACTRL_HIFIPLL_CTRL2,
.shift = 6,
.width = 1,
},
.range = &hifi_pll_mult_range,
.init_regs = hifi_init_regs,
.init_count = ARRAY_SIZE(hifi_init_regs),
},
.hw.init = &(struct clk_init_data){
.name = "hifi_pll",
.ops = &meson_clk_pll_ops,
.parent_data = &(const struct clk_parent_data) {
.fw_name = "hifipll_in",
},
.num_parents = 1,
},
};
static struct clk_fixed_factor fclk_div2_div = {
.mult = 1,
.div = 2,
.hw.init = &(struct clk_init_data){
.name = "fclk_div2_div",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
&fixed_pll.hw
},
.num_parents = 1,
},
};
static struct clk_regmap fclk_div2 = {
.data = &(struct clk_regmap_gate_data){
.offset = ANACTRL_FIXPLL_CTRL0,
.bit_idx = 21,
},
.hw.init = &(struct clk_init_data){
.name = "fclk_div2",
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) {
&fclk_div2_div.hw
},
.num_parents = 1,
/*
* This clock is used by DDR clock in BL2 firmware
* and is required by the platform to operate correctly.
* Until the following condition are met, we need this clock to
* be marked as critical:
* a) Mark the clock used by a firmware resource, if possible
* b) CCF has a clock hand-off mechanism to make the sure the
* clock stays on until the proper driver comes along
*/
.flags = CLK_IS_CRITICAL,
},
};
static struct clk_fixed_factor fclk_div3_div = {
.mult = 1,
.div = 3,
.hw.init = &(struct clk_init_data){
.name = "fclk_div3_div",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
&fixed_pll.hw
},
.num_parents = 1,
},
};
static struct clk_regmap fclk_div3 = {
.data = &(struct clk_regmap_gate_data){
.offset = ANACTRL_FIXPLL_CTRL0,
.bit_idx = 22,
},
.hw.init = &(struct clk_init_data){
.name = "fclk_div3",
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) {
&fclk_div3_div.hw
},
.num_parents = 1,
/*
* This clock is used by APB bus which is set in boot ROM code
* and is required by the platform to operate correctly.
*/
.flags = CLK_IS_CRITICAL,
},
};
static struct clk_fixed_factor fclk_div5_div = {
.mult = 1,
.div = 5,
.hw.init = &(struct clk_init_data){
.name = "fclk_div5_div",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
&fixed_pll.hw
},
.num_parents = 1,
},
};
static struct clk_regmap fclk_div5 = {
.data = &(struct clk_regmap_gate_data){
.offset = ANACTRL_FIXPLL_CTRL0,
.bit_idx = 23,
},
.hw.init = &(struct clk_init_data){
.name = "fclk_div5",
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) {
&fclk_div5_div.hw
},
.num_parents = 1,
/*
* This clock is used by AXI bus which setted in Romcode
* and is required by the platform to operate correctly.
*/
.flags = CLK_IS_CRITICAL,
},
};
static struct clk_fixed_factor fclk_div7_div = {
.mult = 1,
.div = 7,
.hw.init = &(struct clk_init_data){
.name = "fclk_div7_div",
.ops = &clk_fixed_factor_ops,
.parent_hws = (const struct clk_hw *[]) {
&fixed_pll.hw
},
.num_parents = 1,
},
};
static struct clk_regmap fclk_div7 = {
.data = &(struct clk_regmap_gate_data){
.offset = ANACTRL_FIXPLL_CTRL0,
.bit_idx = 24,
},
.hw.init = &(struct clk_init_data){
.name = "fclk_div7",
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) {
&fclk_div7_div.hw
},
.num_parents = 1,
},
};
/* Array of all clocks registered by this provider */
static struct clk_hw *a1_pll_hw_clks[] = {
[CLKID_FIXED_PLL_DCO] = &fixed_pll_dco.hw,
[CLKID_FIXED_PLL] = &fixed_pll.hw,
[CLKID_FCLK_DIV2_DIV] = &fclk_div2_div.hw,
[CLKID_FCLK_DIV3_DIV] = &fclk_div3_div.hw,
[CLKID_FCLK_DIV5_DIV] = &fclk_div5_div.hw,
[CLKID_FCLK_DIV7_DIV] = &fclk_div7_div.hw,
[CLKID_FCLK_DIV2] = &fclk_div2.hw,
[CLKID_FCLK_DIV3] = &fclk_div3.hw,
[CLKID_FCLK_DIV5] = &fclk_div5.hw,
[CLKID_FCLK_DIV7] = &fclk_div7.hw,
[CLKID_HIFI_PLL] = &hifi_pll.hw,
};
static struct clk_regmap *const a1_pll_regmaps[] = {
&fixed_pll_dco,
&fixed_pll,
&fclk_div2,
&fclk_div3,
&fclk_div5,
&fclk_div7,
&hifi_pll,
};
static struct regmap_config a1_pll_regmap_cfg = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
};
static struct meson_clk_hw_data a1_pll_clks = {
.hws = a1_pll_hw_clks,
.num = ARRAY_SIZE(a1_pll_hw_clks),
};
static int meson_a1_pll_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
void __iomem *base;
struct regmap *map;
int clkid, i, err;
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return dev_err_probe(dev, PTR_ERR(base),
"can't ioremap resource\n");
map = devm_regmap_init_mmio(dev, base, &a1_pll_regmap_cfg);
if (IS_ERR(map))
return dev_err_probe(dev, PTR_ERR(map),
"can't init regmap mmio region\n");
/* Populate regmap for the regmap backed clocks */
for (i = 0; i < ARRAY_SIZE(a1_pll_regmaps); i++)
a1_pll_regmaps[i]->map = map;
/* Register clocks */
for (clkid = 0; clkid < a1_pll_clks.num; clkid++) {
err = devm_clk_hw_register(dev, a1_pll_clks.hws[clkid]);
if (err)
return dev_err_probe(dev, err,
"clock[%d] registration failed\n",
clkid);
}
return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get,
&a1_pll_clks);
}
static const struct of_device_id a1_pll_clkc_match_table[] = {
{ .compatible = "amlogic,a1-pll-clkc", },
{}
};
MODULE_DEVICE_TABLE(of, a1_pll_clkc_match_table);
static struct platform_driver a1_pll_clkc_driver = {
.probe = meson_a1_pll_probe,
.driver = {
.name = "a1-pll-clkc",
.of_match_table = a1_pll_clkc_match_table,
},
};
module_platform_driver(a1_pll_clkc_driver);
MODULE_AUTHOR("Jian Hu <jian.hu@amlogic.com>");
MODULE_AUTHOR("Dmitry Rokosov <ddrokosov@sberdevices.ru>");
MODULE_LICENSE("GPL");