169b6a7a6e
Add a new function gpiochip_reserve() to reserve ranges of gpios that platform code has pre-allocated. That is, this marks gpio numbers which will be claimed by drivers that haven't yet been loaded, and thus are not available for dynamic gpio number allocation. [akpm@linux-foundation.org: remove unneeded __must_check] [david-b@pacbell.net: don't export gpiochip_reserve (section fix)] Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
139 lines
4.2 KiB
C
139 lines
4.2 KiB
C
#ifndef _ASM_GENERIC_GPIO_H
|
|
#define _ASM_GENERIC_GPIO_H
|
|
|
|
#ifdef CONFIG_HAVE_GPIO_LIB
|
|
|
|
/* Platforms may implement their GPIO interface with library code,
|
|
* at a small performance cost for non-inlined operations and some
|
|
* extra memory (for code and for per-GPIO table entries).
|
|
*
|
|
* While the GPIO programming interface defines valid GPIO numbers
|
|
* to be in the range 0..MAX_INT, this library restricts them to the
|
|
* smaller range 0..ARCH_NR_GPIOS.
|
|
*/
|
|
|
|
#ifndef ARCH_NR_GPIOS
|
|
#define ARCH_NR_GPIOS 256
|
|
#endif
|
|
|
|
static inline int gpio_is_valid(int number)
|
|
{
|
|
/* only some non-negative numbers are valid */
|
|
return ((unsigned)number) < ARCH_NR_GPIOS;
|
|
}
|
|
|
|
struct seq_file;
|
|
struct module;
|
|
|
|
/**
|
|
* struct gpio_chip - abstract a GPIO controller
|
|
* @label: for diagnostics
|
|
* @direction_input: configures signal "offset" as input, or returns error
|
|
* @get: returns value for signal "offset"; for output signals this
|
|
* returns either the value actually sensed, or zero
|
|
* @direction_output: configures signal "offset" as output, or returns error
|
|
* @set: assigns output value for signal "offset"
|
|
* @dbg_show: optional routine to show contents in debugfs; default code
|
|
* will be used when this is omitted, but custom code can show extra
|
|
* state (such as pullup/pulldown configuration).
|
|
* @base: identifies the first GPIO number handled by this chip; or, if
|
|
* negative during registration, requests dynamic ID allocation.
|
|
* @ngpio: the number of GPIOs handled by this controller; the last GPIO
|
|
* handled is (base + ngpio - 1).
|
|
* @can_sleep: flag must be set iff get()/set() methods sleep, as they
|
|
* must while accessing GPIO expander chips over I2C or SPI
|
|
*
|
|
* A gpio_chip can help platforms abstract various sources of GPIOs so
|
|
* they can all be accessed through a common programing interface.
|
|
* Example sources would be SOC controllers, FPGAs, multifunction
|
|
* chips, dedicated GPIO expanders, and so on.
|
|
*
|
|
* Each chip controls a number of signals, identified in method calls
|
|
* by "offset" values in the range 0..(@ngpio - 1). When those signals
|
|
* are referenced through calls like gpio_get_value(gpio), the offset
|
|
* is calculated by subtracting @base from the gpio number.
|
|
*/
|
|
struct gpio_chip {
|
|
char *label;
|
|
struct module *owner;
|
|
|
|
int (*direction_input)(struct gpio_chip *chip,
|
|
unsigned offset);
|
|
int (*get)(struct gpio_chip *chip,
|
|
unsigned offset);
|
|
int (*direction_output)(struct gpio_chip *chip,
|
|
unsigned offset, int value);
|
|
void (*set)(struct gpio_chip *chip,
|
|
unsigned offset, int value);
|
|
void (*dbg_show)(struct seq_file *s,
|
|
struct gpio_chip *chip);
|
|
int base;
|
|
u16 ngpio;
|
|
unsigned can_sleep:1;
|
|
};
|
|
|
|
extern const char *gpiochip_is_requested(struct gpio_chip *chip,
|
|
unsigned offset);
|
|
extern int __init __must_check gpiochip_reserve(int start, int ngpio);
|
|
|
|
/* add/remove chips */
|
|
extern int gpiochip_add(struct gpio_chip *chip);
|
|
extern int __must_check gpiochip_remove(struct gpio_chip *chip);
|
|
|
|
|
|
/* Always use the library code for GPIO management calls,
|
|
* or when sleeping may be involved.
|
|
*/
|
|
extern int gpio_request(unsigned gpio, const char *label);
|
|
extern void gpio_free(unsigned gpio);
|
|
|
|
extern int gpio_direction_input(unsigned gpio);
|
|
extern int gpio_direction_output(unsigned gpio, int value);
|
|
|
|
extern int gpio_get_value_cansleep(unsigned gpio);
|
|
extern void gpio_set_value_cansleep(unsigned gpio, int value);
|
|
|
|
|
|
/* A platform's <asm/gpio.h> code may want to inline the I/O calls when
|
|
* the GPIO is constant and refers to some always-present controller,
|
|
* giving direct access to chip registers and tight bitbanging loops.
|
|
*/
|
|
extern int __gpio_get_value(unsigned gpio);
|
|
extern void __gpio_set_value(unsigned gpio, int value);
|
|
|
|
extern int __gpio_cansleep(unsigned gpio);
|
|
|
|
|
|
#else
|
|
|
|
static inline int gpio_is_valid(int number)
|
|
{
|
|
/* only non-negative numbers are valid */
|
|
return number >= 0;
|
|
}
|
|
|
|
/* platforms that don't directly support access to GPIOs through I2C, SPI,
|
|
* or other blocking infrastructure can use these wrappers.
|
|
*/
|
|
|
|
static inline int gpio_cansleep(unsigned gpio)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int gpio_get_value_cansleep(unsigned gpio)
|
|
{
|
|
might_sleep();
|
|
return gpio_get_value(gpio);
|
|
}
|
|
|
|
static inline void gpio_set_value_cansleep(unsigned gpio, int value)
|
|
{
|
|
might_sleep();
|
|
gpio_set_value(gpio, value);
|
|
}
|
|
|
|
#endif
|
|
|
|
#endif /* _ASM_GENERIC_GPIO_H */
|