kernel-aes67/arch/um/drivers/port_kern.c
Paolo 'Blaisorblade' Giarrusso dbce706e25 [PATCH] uml: add and use generic hw_controller_type->release
With Chris Wedgwood <cw@f00f.org>

Currently UML must explicitly call the UML-specific
free_irq_by_irq_and_dev() for each free_irq call it's done.

This is needed because ->shutdown and/or ->disable are only called when the
last "action" for that irq is removed.

Instead, for UML shared IRQs (UML IRQs are very often, if not always,
shared), for each dev_id some setup is done, which must be cleared on the
release of that fd.  For instance, for each open console a new instance
(i.e.  new dev_id) of the same IRQ is requested().

Exactly, a fd is stored in an array (pollfds), which is after read by a
host thread and passed to poll().  Each event registered by poll() triggers
an interrupt.  So, for each free_irq() we must remove the corresponding
host fd from the table, which we do via this -release() method.

In this patch we add an appropriate hook for this, and remove all uses of
it by pointing the hook to the said procedure; this is safe to do since the
said procedure.

Also some cosmetic improvements are included.

This is heavily based on some work by Chris Wedgwood, which however didn't
get the patch merged for something I'd call a "misunderstanding" (the need
for this patch wasn't cleanly explained, thus adding the generic hook was
felt as undesirable).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:32 -07:00

309 lines
6.7 KiB
C

/*
* Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
#include "linux/list.h"
#include "linux/sched.h"
#include "linux/slab.h"
#include "linux/interrupt.h"
#include "linux/irq.h"
#include "linux/spinlock.h"
#include "linux/errno.h"
#include "asm/atomic.h"
#include "asm/semaphore.h"
#include "asm/errno.h"
#include "kern_util.h"
#include "kern.h"
#include "irq_user.h"
#include "irq_kern.h"
#include "port.h"
#include "init.h"
#include "os.h"
struct port_list {
struct list_head list;
atomic_t wait_count;
int has_connection;
struct completion done;
int port;
int fd;
spinlock_t lock;
struct list_head pending;
struct list_head connections;
};
struct port_dev {
struct port_list *port;
int helper_pid;
int telnetd_pid;
};
struct connection {
struct list_head list;
int fd;
int helper_pid;
int socket[2];
int telnetd_pid;
struct port_list *port;
};
static irqreturn_t pipe_interrupt(int irq, void *data, struct pt_regs *regs)
{
struct connection *conn = data;
int fd;
fd = os_rcv_fd(conn->socket[0], &conn->helper_pid);
if(fd < 0){
if(fd == -EAGAIN)
return(IRQ_NONE);
printk(KERN_ERR "pipe_interrupt : os_rcv_fd returned %d\n",
-fd);
os_close_file(conn->fd);
}
list_del(&conn->list);
conn->fd = fd;
list_add(&conn->list, &conn->port->connections);
complete(&conn->port->done);
return(IRQ_HANDLED);
}
#define NO_WAITER_MSG \
"****\n" \
"There are currently no UML consoles waiting for port connections.\n" \
"Either disconnect from one to make it available or activate some more\n" \
"by enabling more consoles in the UML /etc/inittab.\n" \
"****\n"
static int port_accept(struct port_list *port)
{
struct connection *conn;
int fd, socket[2], pid, ret = 0;
fd = port_connection(port->fd, socket, &pid);
if(fd < 0){
if(fd != -EAGAIN)
printk(KERN_ERR "port_accept : port_connection "
"returned %d\n", -fd);
goto out;
}
conn = kmalloc(sizeof(*conn), GFP_ATOMIC);
if(conn == NULL){
printk(KERN_ERR "port_accept : failed to allocate "
"connection\n");
goto out_close;
}
*conn = ((struct connection)
{ .list = LIST_HEAD_INIT(conn->list),
.fd = fd,
.socket = { socket[0], socket[1] },
.telnetd_pid = pid,
.port = port });
if(um_request_irq(TELNETD_IRQ, socket[0], IRQ_READ, pipe_interrupt,
SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM,
"telnetd", conn)){
printk(KERN_ERR "port_accept : failed to get IRQ for "
"telnetd\n");
goto out_free;
}
if(atomic_read(&port->wait_count) == 0){
os_write_file(fd, NO_WAITER_MSG, sizeof(NO_WAITER_MSG));
printk("No one waiting for port\n");
}
list_add(&conn->list, &port->pending);
return(1);
out_free:
kfree(conn);
out_close:
os_close_file(fd);
if(pid != -1)
os_kill_process(pid, 1);
out:
return(ret);
}
DECLARE_MUTEX(ports_sem);
struct list_head ports = LIST_HEAD_INIT(ports);
void port_work_proc(void *unused)
{
struct port_list *port;
struct list_head *ele;
unsigned long flags;
local_irq_save(flags);
list_for_each(ele, &ports){
port = list_entry(ele, struct port_list, list);
if(!port->has_connection)
continue;
reactivate_fd(port->fd, ACCEPT_IRQ);
while(port_accept(port)) ;
port->has_connection = 0;
}
local_irq_restore(flags);
}
DECLARE_WORK(port_work, port_work_proc, NULL);
static irqreturn_t port_interrupt(int irq, void *data, struct pt_regs *regs)
{
struct port_list *port = data;
port->has_connection = 1;
schedule_work(&port_work);
return(IRQ_HANDLED);
}
void *port_data(int port_num)
{
struct list_head *ele;
struct port_list *port;
struct port_dev *dev = NULL;
int fd;
down(&ports_sem);
list_for_each(ele, &ports){
port = list_entry(ele, struct port_list, list);
if(port->port == port_num) goto found;
}
port = kmalloc(sizeof(struct port_list), GFP_KERNEL);
if(port == NULL){
printk(KERN_ERR "Allocation of port list failed\n");
goto out;
}
fd = port_listen_fd(port_num);
if(fd < 0){
printk(KERN_ERR "binding to port %d failed, errno = %d\n",
port_num, -fd);
goto out_free;
}
if(um_request_irq(ACCEPT_IRQ, fd, IRQ_READ, port_interrupt,
SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM, "port",
port)){
printk(KERN_ERR "Failed to get IRQ for port %d\n", port_num);
goto out_close;
}
*port = ((struct port_list)
{ .list = LIST_HEAD_INIT(port->list),
.wait_count = ATOMIC_INIT(0),
.has_connection = 0,
.port = port_num,
.fd = fd,
.pending = LIST_HEAD_INIT(port->pending),
.connections = LIST_HEAD_INIT(port->connections) });
spin_lock_init(&port->lock);
init_completion(&port->done);
list_add(&port->list, &ports);
found:
dev = kmalloc(sizeof(struct port_dev), GFP_KERNEL);
if(dev == NULL){
printk(KERN_ERR "Allocation of port device entry failed\n");
goto out;
}
*dev = ((struct port_dev) { .port = port,
.helper_pid = -1,
.telnetd_pid = -1 });
goto out;
out_free:
kfree(port);
out_close:
os_close_file(fd);
out:
up(&ports_sem);
return(dev);
}
int port_wait(void *data)
{
struct port_dev *dev = data;
struct connection *conn;
struct port_list *port = dev->port;
int fd;
atomic_inc(&port->wait_count);
while(1){
fd = -ERESTARTSYS;
if(wait_for_completion_interruptible(&port->done))
goto out;
spin_lock(&port->lock);
conn = list_entry(port->connections.next, struct connection,
list);
list_del(&conn->list);
spin_unlock(&port->lock);
os_shutdown_socket(conn->socket[0], 1, 1);
os_close_file(conn->socket[0]);
os_shutdown_socket(conn->socket[1], 1, 1);
os_close_file(conn->socket[1]);
/* This is done here because freeing an IRQ can't be done
* within the IRQ handler. So, pipe_interrupt always ups
* the semaphore regardless of whether it got a successful
* connection. Then we loop here throwing out failed
* connections until a good one is found.
*/
free_irq(TELNETD_IRQ, conn);
if(conn->fd >= 0) break;
os_close_file(conn->fd);
kfree(conn);
}
fd = conn->fd;
dev->helper_pid = conn->helper_pid;
dev->telnetd_pid = conn->telnetd_pid;
kfree(conn);
out:
atomic_dec(&port->wait_count);
return fd;
}
void port_remove_dev(void *d)
{
struct port_dev *dev = d;
if(dev->helper_pid != -1)
os_kill_process(dev->helper_pid, 0);
if(dev->telnetd_pid != -1)
os_kill_process(dev->telnetd_pid, 1);
dev->helper_pid = -1;
dev->telnetd_pid = -1;
}
void port_kern_free(void *d)
{
struct port_dev *dev = d;
port_remove_dev(dev);
kfree(dev);
}
static void free_port(void)
{
struct list_head *ele;
struct port_list *port;
list_for_each(ele, &ports){
port = list_entry(ele, struct port_list, list);
free_irq_by_fd(port->fd);
os_close_file(port->fd);
}
}
__uml_exitcall(free_port);