kernel-aes67/drivers/base/attribute_container.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

377 lines
11 KiB
C

/*
* attribute_container.c - implementation of a simple container for classes
*
* Copyright (c) 2005 - James Bottomley <James.Bottomley@steeleye.com>
*
* This file is licensed under GPLv2
*
* The basic idea here is to enable a device to be attached to an
* aritrary numer of classes without having to allocate storage for them.
* Instead, the contained classes select the devices they need to attach
* to via a matching function.
*/
#include <linux/attribute_container.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/module.h>
/* This is a private structure used to tie the classdev and the
* container .. it should never be visible outside this file */
struct internal_container {
struct list_head node;
struct attribute_container *cont;
struct class_device classdev;
};
/**
* attribute_container_classdev_to_container - given a classdev, return the container
*
* @classdev: the class device created by attribute_container_add_device.
*
* Returns the container associated with this classdev.
*/
struct attribute_container *
attribute_container_classdev_to_container(struct class_device *classdev)
{
struct internal_container *ic =
container_of(classdev, struct internal_container, classdev);
return ic->cont;
}
EXPORT_SYMBOL_GPL(attribute_container_classdev_to_container);
static struct list_head attribute_container_list;
static DECLARE_MUTEX(attribute_container_mutex);
/**
* attribute_container_register - register an attribute container
*
* @cont: The container to register. This must be allocated by the
* callee and should also be zeroed by it.
*/
int
attribute_container_register(struct attribute_container *cont)
{
INIT_LIST_HEAD(&cont->node);
INIT_LIST_HEAD(&cont->containers);
down(&attribute_container_mutex);
list_add_tail(&cont->node, &attribute_container_list);
up(&attribute_container_mutex);
return 0;
}
EXPORT_SYMBOL_GPL(attribute_container_register);
/**
* attribute_container_unregister - remove a container registration
*
* @cont: previously registered container to remove
*/
int
attribute_container_unregister(struct attribute_container *cont)
{
int retval = -EBUSY;
down(&attribute_container_mutex);
if (!list_empty(&cont->containers))
goto out;
retval = 0;
list_del(&cont->node);
out:
up(&attribute_container_mutex);
return retval;
}
EXPORT_SYMBOL_GPL(attribute_container_unregister);
/* private function used as class release */
static void attribute_container_release(struct class_device *classdev)
{
struct internal_container *ic
= container_of(classdev, struct internal_container, classdev);
struct device *dev = classdev->dev;
kfree(ic);
put_device(dev);
}
/**
* attribute_container_add_device - see if any container is interested in dev
*
* @dev: device to add attributes to
* @fn: function to trigger addition of class device.
*
* This function allocates storage for the class device(s) to be
* attached to dev (one for each matching attribute_container). If no
* fn is provided, the code will simply register the class device via
* class_device_add. If a function is provided, it is expected to add
* the class device at the appropriate time. One of the things that
* might be necessary is to allocate and initialise the classdev and
* then add it a later time. To do this, call this routine for
* allocation and initialisation and then use
* attribute_container_device_trigger() to call class_device_add() on
* it. Note: after this, the class device contains a reference to dev
* which is not relinquished until the release of the classdev.
*/
void
attribute_container_add_device(struct device *dev,
int (*fn)(struct attribute_container *,
struct device *,
struct class_device *))
{
struct attribute_container *cont;
down(&attribute_container_mutex);
list_for_each_entry(cont, &attribute_container_list, node) {
struct internal_container *ic;
if (attribute_container_no_classdevs(cont))
continue;
if (!cont->match(cont, dev))
continue;
ic = kmalloc(sizeof(struct internal_container), GFP_KERNEL);
if (!ic) {
dev_printk(KERN_ERR, dev, "failed to allocate class container\n");
continue;
}
memset(ic, 0, sizeof(struct internal_container));
INIT_LIST_HEAD(&ic->node);
ic->cont = cont;
class_device_initialize(&ic->classdev);
ic->classdev.dev = get_device(dev);
ic->classdev.class = cont->class;
cont->class->release = attribute_container_release;
strcpy(ic->classdev.class_id, dev->bus_id);
if (fn)
fn(cont, dev, &ic->classdev);
else
attribute_container_add_class_device(&ic->classdev);
list_add_tail(&ic->node, &cont->containers);
}
up(&attribute_container_mutex);
}
/**
* attribute_container_remove_device - make device eligible for removal.
*
* @dev: The generic device
* @fn: A function to call to remove the device
*
* This routine triggers device removal. If fn is NULL, then it is
* simply done via class_device_unregister (note that if something
* still has a reference to the classdev, then the memory occupied
* will not be freed until the classdev is released). If you want a
* two phase release: remove from visibility and then delete the
* device, then you should use this routine with a fn that calls
* class_device_del() and then use
* attribute_container_device_trigger() to do the final put on the
* classdev.
*/
void
attribute_container_remove_device(struct device *dev,
void (*fn)(struct attribute_container *,
struct device *,
struct class_device *))
{
struct attribute_container *cont;
down(&attribute_container_mutex);
list_for_each_entry(cont, &attribute_container_list, node) {
struct internal_container *ic, *tmp;
if (attribute_container_no_classdevs(cont))
continue;
if (!cont->match(cont, dev))
continue;
list_for_each_entry_safe(ic, tmp, &cont->containers, node) {
if (dev != ic->classdev.dev)
continue;
list_del(&ic->node);
if (fn)
fn(cont, dev, &ic->classdev);
else {
attribute_container_remove_attrs(&ic->classdev);
class_device_unregister(&ic->classdev);
}
}
}
up(&attribute_container_mutex);
}
EXPORT_SYMBOL_GPL(attribute_container_remove_device);
/**
* attribute_container_device_trigger - execute a trigger for each matching classdev
*
* @dev: The generic device to run the trigger for
* @fn the function to execute for each classdev.
*
* This funcion is for executing a trigger when you need to know both
* the container and the classdev. If you only care about the
* container, then use attribute_container_trigger() instead.
*/
void
attribute_container_device_trigger(struct device *dev,
int (*fn)(struct attribute_container *,
struct device *,
struct class_device *))
{
struct attribute_container *cont;
down(&attribute_container_mutex);
list_for_each_entry(cont, &attribute_container_list, node) {
struct internal_container *ic, *tmp;
if (!cont->match(cont, dev))
continue;
list_for_each_entry_safe(ic, tmp, &cont->containers, node) {
if (dev == ic->classdev.dev)
fn(cont, dev, &ic->classdev);
}
}
up(&attribute_container_mutex);
}
EXPORT_SYMBOL_GPL(attribute_container_device_trigger);
/**
* attribute_container_trigger - trigger a function for each matching container
*
* @dev: The generic device to activate the trigger for
* @fn: the function to trigger
*
* This routine triggers a function that only needs to know the
* matching containers (not the classdev) associated with a device.
* It is more lightweight than attribute_container_device_trigger, so
* should be used in preference unless the triggering function
* actually needs to know the classdev.
*/
void
attribute_container_trigger(struct device *dev,
int (*fn)(struct attribute_container *,
struct device *))
{
struct attribute_container *cont;
down(&attribute_container_mutex);
list_for_each_entry(cont, &attribute_container_list, node) {
if (cont->match(cont, dev))
fn(cont, dev);
}
up(&attribute_container_mutex);
}
EXPORT_SYMBOL_GPL(attribute_container_trigger);
/**
* attribute_container_add_attrs - add attributes
*
* @classdev: The class device
*
* This simply creates all the class device sysfs files from the
* attributes listed in the container
*/
int
attribute_container_add_attrs(struct class_device *classdev)
{
struct attribute_container *cont =
attribute_container_classdev_to_container(classdev);
struct class_device_attribute **attrs = cont->attrs;
int i, error;
if (!attrs)
return 0;
for (i = 0; attrs[i]; i++) {
error = class_device_create_file(classdev, attrs[i]);
if (error)
return error;
}
return 0;
}
EXPORT_SYMBOL_GPL(attribute_container_add_attrs);
/**
* attribute_container_add_class_device - same function as class_device_add
*
* @classdev: the class device to add
*
* This performs essentially the same function as class_device_add except for
* attribute containers, namely add the classdev to the system and then
* create the attribute files
*/
int
attribute_container_add_class_device(struct class_device *classdev)
{
int error = class_device_add(classdev);
if (error)
return error;
return attribute_container_add_attrs(classdev);
}
EXPORT_SYMBOL_GPL(attribute_container_add_class_device);
/**
* attribute_container_add_class_device_adapter - simple adapter for triggers
*
* This function is identical to attribute_container_add_class_device except
* that it is designed to be called from the triggers
*/
int
attribute_container_add_class_device_adapter(struct attribute_container *cont,
struct device *dev,
struct class_device *classdev)
{
return attribute_container_add_class_device(classdev);
}
EXPORT_SYMBOL_GPL(attribute_container_add_class_device_adapter);
/**
* attribute_container_remove_attrs - remove any attribute files
*
* @classdev: The class device to remove the files from
*
*/
void
attribute_container_remove_attrs(struct class_device *classdev)
{
struct attribute_container *cont =
attribute_container_classdev_to_container(classdev);
struct class_device_attribute **attrs = cont->attrs;
int i;
if (!attrs)
return;
for (i = 0; attrs[i]; i++)
class_device_remove_file(classdev, attrs[i]);
}
EXPORT_SYMBOL_GPL(attribute_container_remove_attrs);
/**
* attribute_container_class_device_del - equivalent of class_device_del
*
* @classdev: the class device
*
* This function simply removes all the attribute files and then calls
* class_device_del.
*/
void
attribute_container_class_device_del(struct class_device *classdev)
{
attribute_container_remove_attrs(classdev);
class_device_del(classdev);
}
EXPORT_SYMBOL_GPL(attribute_container_class_device_del);
int __init
attribute_container_init(void)
{
INIT_LIST_HEAD(&attribute_container_list);
return 0;
}