kernel-aes67/drivers/acpi/executer/exstorob.c
Bob Moore 958dd242b6 ACPI: ACPICA 20060512
Replaced the acpi_os_queue_for_execution() with a new
interface named acpi_os_execute(). The major difference is
that the new interface does not have a Priority parameter,
this appeared to be useless and has been replaced by
a Type parameter. The Type tells the OS what type of
execution is being requested, such as global lock handler,
notify handler, GPE handler, etc. This allows the host
to queue and execute the request as appropriate for the
request type, possibly using different work queues and
different priorities for the various request types. This
enables fixes for multithreading deadlock problems such as
http://bugzilla.kernel.org/show_bug.cgi?id=5534
(Alexey Starikovskiy and Bob Moore)

Fixed a possible memory leak associated with the
support for the so-called "implicit return" ACPI
extension. Reported by FreeBSD  (Fiodor Suietov)
http://bugzilla.kernel.org/show_bug.cgi?id=6514

Fixed a problem with the Load() operator where a table
load from an operation region could overwrite an internal
table buffer by up to 7 bytes and cause alignment faults
on IPF systems. (With assistance from Luming Yu)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-14 02:34:48 -04:00

209 lines
6.8 KiB
C

/******************************************************************************
*
* Module Name: exstorob - AML Interpreter object store support, store to object
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/acinterp.h>
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exstorob")
/*******************************************************************************
*
* FUNCTION: acpi_ex_store_buffer_to_buffer
*
* PARAMETERS: source_desc - Source object to copy
* target_desc - Destination object of the copy
*
* RETURN: Status
*
* DESCRIPTION: Copy a buffer object to another buffer object.
*
******************************************************************************/
acpi_status
acpi_ex_store_buffer_to_buffer(union acpi_operand_object *source_desc,
union acpi_operand_object *target_desc)
{
u32 length;
u8 *buffer;
ACPI_FUNCTION_TRACE_PTR(ex_store_buffer_to_buffer, source_desc);
/* We know that source_desc is a buffer by now */
buffer = ACPI_CAST_PTR(u8, source_desc->buffer.pointer);
length = source_desc->buffer.length;
/*
* If target is a buffer of length zero or is a static buffer,
* allocate a new buffer of the proper length
*/
if ((target_desc->buffer.length == 0) ||
(target_desc->common.flags & AOPOBJ_STATIC_POINTER)) {
target_desc->buffer.pointer = ACPI_ALLOCATE(length);
if (!target_desc->buffer.pointer) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
target_desc->buffer.length = length;
}
/* Copy source buffer to target buffer */
if (length <= target_desc->buffer.length) {
/* Clear existing buffer and copy in the new one */
ACPI_MEMSET(target_desc->buffer.pointer, 0,
target_desc->buffer.length);
ACPI_MEMCPY(target_desc->buffer.pointer, buffer, length);
#ifdef ACPI_OBSOLETE_BEHAVIOR
/*
* NOTE: ACPI versions up to 3.0 specified that the buffer must be
* truncated if the string is smaller than the buffer. However, "other"
* implementations of ACPI never did this and thus became the defacto
* standard. ACPI 3.0_a changes this behavior such that the buffer
* is no longer truncated.
*/
/*
* OBSOLETE BEHAVIOR:
* If the original source was a string, we must truncate the buffer,
* according to the ACPI spec. Integer-to-Buffer and Buffer-to-Buffer
* copy must not truncate the original buffer.
*/
if (original_src_type == ACPI_TYPE_STRING) {
/* Set the new length of the target */
target_desc->buffer.length = length;
}
#endif
} else {
/* Truncate the source, copy only what will fit */
ACPI_MEMCPY(target_desc->buffer.pointer, buffer,
target_desc->buffer.length);
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Truncating source buffer from %X to %X\n",
length, target_desc->buffer.length));
}
/* Copy flags */
target_desc->buffer.flags = source_desc->buffer.flags;
target_desc->common.flags &= ~AOPOBJ_STATIC_POINTER;
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_store_string_to_string
*
* PARAMETERS: source_desc - Source object to copy
* target_desc - Destination object of the copy
*
* RETURN: Status
*
* DESCRIPTION: Copy a String object to another String object
*
******************************************************************************/
acpi_status
acpi_ex_store_string_to_string(union acpi_operand_object *source_desc,
union acpi_operand_object *target_desc)
{
u32 length;
u8 *buffer;
ACPI_FUNCTION_TRACE_PTR(ex_store_string_to_string, source_desc);
/* We know that source_desc is a string by now */
buffer = ACPI_CAST_PTR(u8, source_desc->string.pointer);
length = source_desc->string.length;
/*
* Replace existing string value if it will fit and the string
* pointer is not a static pointer (part of an ACPI table)
*/
if ((length < target_desc->string.length) &&
(!(target_desc->common.flags & AOPOBJ_STATIC_POINTER))) {
/*
* String will fit in existing non-static buffer.
* Clear old string and copy in the new one
*/
ACPI_MEMSET(target_desc->string.pointer, 0,
(acpi_size) target_desc->string.length + 1);
ACPI_MEMCPY(target_desc->string.pointer, buffer, length);
} else {
/*
* Free the current buffer, then allocate a new buffer
* large enough to hold the value
*/
if (target_desc->string.pointer &&
(!(target_desc->common.flags & AOPOBJ_STATIC_POINTER))) {
/* Only free if not a pointer into the DSDT */
ACPI_FREE(target_desc->string.pointer);
}
target_desc->string.pointer = ACPI_ALLOCATE_ZEROED((acpi_size)
length + 1);
if (!target_desc->string.pointer) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
target_desc->common.flags &= ~AOPOBJ_STATIC_POINTER;
ACPI_MEMCPY(target_desc->string.pointer, buffer, length);
}
/* Set the new target length */
target_desc->string.length = length;
return_ACPI_STATUS(AE_OK);
}