Ben Dooks 7c48ed3383 mmc: s3cmci: fix s3c2410_dma_config() arguments. ... The s3cmci driver is calling s3c2410_dma_config with incorrect data for the DCON register. The S3C2410_DCON_HWTRIG is implicit in the channel configuration and the device selection of S3C2410_DCON_CH0_SDI is incorrect as the DMA system may not select channel 0. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>		2009-03-12 16:20:24 -07:00
..
at91_mci.c
atmel-mci-regs.h
atmel-mci.c	atmel-mci: fix initialization of dma slave data	2009-02-18 15:37:55 -08:00
au1xmmc.c
imxmmc.c
imxmmc.h
Kconfig	mmc: Add a MX2/MX3 specific SDHC driver	2009-02-02 20:57:05 +01:00
Makefile	mmc: Add a MX2/MX3 specific SDHC driver	2009-02-02 20:57:05 +01:00
mmc_spi.c
mmci.c	mmci: Add support for ST Micro derivate	2009-02-02 20:57:06 +01:00
mmci.h	mmci: Add support for ST Micro derivate	2009-02-02 20:57:06 +01:00
mxcmmc.c	mmc: Add a MX2/MX3 specific SDHC driver	2009-02-02 20:57:05 +01:00
of_mmc_spi.c
omap_hsmmc.c	omap_hsmmc: Change while(); loops with finite version	2009-02-18 22:14:21 +01:00
omap.c
pxamci.c	pxamci: enable DMA for write ops after CMD/RESP	2009-02-02 20:57:07 +01:00
pxamci.h
ricoh_mmc.c	ricoh_mmc: Use suspend_late/resume_early	2009-02-02 20:57:06 +01:00
s3cmci.c	mmc: s3cmci: fix s3c2410_dma_config() arguments.	2009-03-12 16:20:24 -07:00
s3cmci.h
sdhci-pci.c	sdhci: Add NO_BUSY_IRQ quirk for Marvell CAFE host chip	2009-03-02 21:48:20 +01:00
sdhci.c	sdhci: Add quirk for controllers with no end-of-busy IRQ	2009-03-02 21:46:35 +01:00
sdhci.h	sdhci: Add quirk for controllers with no end-of-busy IRQ	2009-03-02 21:46:35 +01:00
sdricoh_cs.c
tifm_sd.c
tmio_mmc.c
tmio_mmc.h
wbsd.c
wbsd.h