Preston_PLB/kernel-aes67
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a9546f59e9
kernel-aes67/arch/ppc/platforms/pmac_feature.c
Benjamin Herrenschmidt 7bbd827750 [PATCH] ppc64: very basic desktop g5 sound support 
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s.  It has severe limitations
though:

 - Only 44100Khz 16 bits
 - Only work on G5 models using a TAS3004 analog code, that is early
   single CPU desktops and all dual CPU desktops at this date, but none
   of the more recent ones like iMac G5.
 - It does analog only, no digital/SPDIF support at all, no native
   AC3 support

Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...

This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).  

Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer.  So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.

Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack.  If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:24:32 -07:00

2992 lines
80 KiB
C
Raw Blame History

/*
* arch/ppc/platforms/pmac_feature.c
*
* Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au)
* Ben. Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* TODO:
*
* - Replace mdelay with some schedule loop if possible
* - Shorten some obfuscated delays on some routines (like modem
* power)
* - Refcount some clocks (see darwin)
* - Split split split...
*
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/adb.h>
#include <linux/pmu.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <asm/sections.h>
#include <asm/errno.h>
#include <asm/ohare.h>
#include <asm/heathrow.h>
#include <asm/keylargo.h>
#include <asm/uninorth.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/dbdma.h>
#include <asm/pci-bridge.h>
#include <asm/pmac_low_i2c.h>
#undef DEBUG_FEATURE
#ifdef DEBUG_FEATURE
#define DBG(fmt,...) printk(KERN_DEBUG fmt)
#else
#define DBG(fmt,...)
#endif
#ifdef CONFIG_6xx
extern int powersave_lowspeed;
#endif
extern int powersave_nap;
extern struct device_node *k2_skiplist[2];
/*
* We use a single global lock to protect accesses. Each driver has
* to take care of its own locking
*/
static DEFINE_SPINLOCK(feature_lock __pmacdata);
#define LOCK(flags) spin_lock_irqsave(&feature_lock, flags);
#define UNLOCK(flags) spin_unlock_irqrestore(&feature_lock, flags);
/*
* Instance of some macio stuffs
*/
struct macio_chip macio_chips[MAX_MACIO_CHIPS] __pmacdata;
struct macio_chip* __pmac macio_find(struct device_node* child, int type)
{
while(child) {
int i;
for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++)
if (child == macio_chips[i].of_node &&
(!type || macio_chips[i].type == type))
return &macio_chips[i];
child = child->parent;
}
return NULL;
}
EXPORT_SYMBOL_GPL(macio_find);
static const char* macio_names[] __pmacdata =
{
"Unknown",
"Grand Central",
"OHare",
"OHareII",
"Heathrow",
"Gatwick",
"Paddington",
"Keylargo",
"Pangea",
"Intrepid",
"K2"
};
/*
* Uninorth reg. access. Note that Uni-N regs are big endian
*/
#define UN_REG(r) (uninorth_base + ((r) >> 2))
#define UN_IN(r) (in_be32(UN_REG(r)))
#define UN_OUT(r,v) (out_be32(UN_REG(r), (v)))
#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v)))
#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v)))
static struct device_node* uninorth_node __pmacdata;
static u32 __iomem * uninorth_base __pmacdata;
static u32 uninorth_rev __pmacdata;
static int uninorth_u3 __pmacdata;
static void __iomem *u3_ht;
/*
* For each motherboard family, we have a table of functions pointers
* that handle the various features.
*/
typedef long (*feature_call)(struct device_node* node, long param, long value);
struct feature_table_entry {
unsigned int selector;
feature_call function;
};
struct pmac_mb_def
{
const char* model_string;
const char* model_name;
int model_id;
struct feature_table_entry* features;
unsigned long board_flags;
};
static struct pmac_mb_def pmac_mb __pmacdata;
/*
* Here are the chip specific feature functions
*/
static inline int __pmac
simple_feature_tweak(struct device_node* node, int type, int reg, u32 mask, int value)
{
struct macio_chip* macio;
unsigned long flags;
macio = macio_find(node, type);
if (!macio)
return -ENODEV;
LOCK(flags);
if (value)
MACIO_BIS(reg, mask);
else
MACIO_BIC(reg, mask);
(void)MACIO_IN32(reg);
UNLOCK(flags);
return 0;
}
#ifndef CONFIG_POWER4
static long __pmac
ohare_htw_scc_enable(struct device_node* node, long param, long value)
{
struct macio_chip* macio;
unsigned long chan_mask;
unsigned long fcr;
unsigned long flags;
int htw, trans;
unsigned long rmask;
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
if (!strcmp(node->name, "ch-a"))
chan_mask = MACIO_FLAG_SCCA_ON;
else if (!strcmp(node->name, "ch-b"))
chan_mask = MACIO_FLAG_SCCB_ON;
else
return -ENODEV;
htw = (macio->type == macio_heathrow || macio->type == macio_paddington
|| macio->type == macio_gatwick);
/* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */
trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
pmac_mb.model_id != PMAC_TYPE_YIKES);
if (value) {
#ifdef CONFIG_ADB_PMU
if ((param & 0xfff) == PMAC_SCC_IRDA)
pmu_enable_irled(1);
#endif /* CONFIG_ADB_PMU */
LOCK(flags);
fcr = MACIO_IN32(OHARE_FCR);
/* Check if scc cell need enabling */
if (!(fcr & OH_SCC_ENABLE)) {
fcr |= OH_SCC_ENABLE;
if (htw) {
/* Side effect: this will also power up the
* modem, but it's too messy to figure out on which
* ports this controls the tranceiver and on which
* it controls the modem
*/
if (trans)
fcr &= ~HRW_SCC_TRANS_EN_N;
MACIO_OUT32(OHARE_FCR, fcr);
fcr |= (rmask = HRW_RESET_SCC);
MACIO_OUT32(OHARE_FCR, fcr);
} else {
fcr |= (rmask = OH_SCC_RESET);
MACIO_OUT32(OHARE_FCR, fcr);
}
UNLOCK(flags);
(void)MACIO_IN32(OHARE_FCR);
mdelay(15);
LOCK(flags);
fcr &= ~rmask;
MACIO_OUT32(OHARE_FCR, fcr);
}
if (chan_mask & MACIO_FLAG_SCCA_ON)
fcr |= OH_SCCA_IO;
if (chan_mask & MACIO_FLAG_SCCB_ON)
fcr |= OH_SCCB_IO;
MACIO_OUT32(OHARE_FCR, fcr);
macio->flags |= chan_mask;
UNLOCK(flags);
if (param & PMAC_SCC_FLAG_XMON)
macio->flags |= MACIO_FLAG_SCC_LOCKED;
} else {
if (macio->flags & MACIO_FLAG_SCC_LOCKED)
return -EPERM;
LOCK(flags);
fcr = MACIO_IN32(OHARE_FCR);
if (chan_mask & MACIO_FLAG_SCCA_ON)
fcr &= ~OH_SCCA_IO;
if (chan_mask & MACIO_FLAG_SCCB_ON)
fcr &= ~OH_SCCB_IO;
MACIO_OUT32(OHARE_FCR, fcr);
if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) {
fcr &= ~OH_SCC_ENABLE;
if (htw && trans)
fcr |= HRW_SCC_TRANS_EN_N;
MACIO_OUT32(OHARE_FCR, fcr);
}
macio->flags &= ~(chan_mask);
UNLOCK(flags);
mdelay(10);
#ifdef CONFIG_ADB_PMU
if ((param & 0xfff) == PMAC_SCC_IRDA)
pmu_enable_irled(0);
#endif /* CONFIG_ADB_PMU */
}
return 0;
}
static long __pmac
ohare_floppy_enable(struct device_node* node, long param, long value)
{
return simple_feature_tweak(node, macio_ohare,
OHARE_FCR, OH_FLOPPY_ENABLE, value);
}
static long __pmac
ohare_mesh_enable(struct device_node* node, long param, long value)
{
return simple_feature_tweak(node, macio_ohare,
OHARE_FCR, OH_MESH_ENABLE, value);
}
static long __pmac
ohare_ide_enable(struct device_node* node, long param, long value)
{
switch(param) {
case 0:
/* For some reason, setting the bit in set_initial_features()
* doesn't stick. I'm still investigating... --BenH.
*/
if (value)
simple_feature_tweak(node, macio_ohare,
OHARE_FCR, OH_IOBUS_ENABLE, 1);
return simple_feature_tweak(node, macio_ohare,
OHARE_FCR, OH_IDE0_ENABLE, value);
case 1:
return simple_feature_tweak(node, macio_ohare,
OHARE_FCR, OH_BAY_IDE_ENABLE, value);
default:
return -ENODEV;
}
}
static long __pmac
ohare_ide_reset(struct device_node* node, long param, long value)
{
switch(param) {
case 0:
return simple_feature_tweak(node, macio_ohare,
OHARE_FCR, OH_IDE0_RESET_N, !value);
case 1:
return simple_feature_tweak(node, macio_ohare,
OHARE_FCR, OH_IDE1_RESET_N, !value);
default:
return -ENODEV;
}
}
static long __pmac
ohare_sleep_state(struct device_node* node, long param, long value)
{
struct macio_chip* macio = &macio_chips[0];
if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
return -EPERM;
if (value == 1) {
MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE);
} else if (value == 0) {
MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
}
return 0;
}
static long __pmac
heathrow_modem_enable(struct device_node* node, long param, long value)
{
struct macio_chip* macio;
u8 gpio;
unsigned long flags;
macio = macio_find(node, macio_unknown);
if (!macio)
return -ENODEV;
gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1;
if (!value) {
LOCK(flags);
MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
UNLOCK(flags);
(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
mdelay(250);
}
if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
pmac_mb.model_id != PMAC_TYPE_YIKES) {
LOCK(flags);
if (value)
MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
else
MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
UNLOCK(flags);
(void)MACIO_IN32(HEATHROW_FCR);
mdelay(250);
}
if (value) {
LOCK(flags);
MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250); LOCK(flags);
MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250); LOCK(flags);
MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250);
}
return 0;
}
static long __pmac
heathrow_floppy_enable(struct device_node* node, long param, long value)
{
return simple_feature_tweak(node, macio_unknown,
HEATHROW_FCR,
HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE,
value);
}
static long __pmac
heathrow_mesh_enable(struct device_node* node, long param, long value)
{
struct macio_chip* macio;
unsigned long flags;
macio = macio_find(node, macio_unknown);
if (!macio)
return -ENODEV;
LOCK(flags);
/* Set clear mesh cell enable */
if (value)
MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE);
else
MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE);
(void)MACIO_IN32(HEATHROW_FCR);
udelay(10);
/* Set/Clear termination power */
if (value)
MACIO_BIC(HEATHROW_MBCR, 0x04000000);
else
MACIO_BIS(HEATHROW_MBCR, 0x04000000);
(void)MACIO_IN32(HEATHROW_MBCR);
udelay(10);
UNLOCK(flags);
return 0;
}
static long __pmac
heathrow_ide_enable(struct device_node* node, long param, long value)
{
switch(param) {
case 0:
return simple_feature_tweak(node, macio_unknown,
HEATHROW_FCR, HRW_IDE0_ENABLE, value);
case 1:
return simple_feature_tweak(node, macio_unknown,
HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value);
default:
return -ENODEV;
}
}
static long __pmac
heathrow_ide_reset(struct device_node* node, long param, long value)
{
switch(param) {
case 0:
return simple_feature_tweak(node, macio_unknown,
HEATHROW_FCR, HRW_IDE0_RESET_N, !value);
case 1:
return simple_feature_tweak(node, macio_unknown,
HEATHROW_FCR, HRW_IDE1_RESET_N, !value);
default:
return -ENODEV;
}
}
static long __pmac
heathrow_bmac_enable(struct device_node* node, long param, long value)
{
struct macio_chip* macio;
unsigned long flags;
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
if (value) {
LOCK(flags);
MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET);
UNLOCK(flags);
(void)MACIO_IN32(HEATHROW_FCR);
mdelay(10);
LOCK(flags);
MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET);
UNLOCK(flags);
(void)MACIO_IN32(HEATHROW_FCR);
mdelay(10);
} else {
LOCK(flags);
MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
UNLOCK(flags);
}
return 0;
}
static long __pmac
heathrow_sound_enable(struct device_node* node, long param, long value)
{
struct macio_chip* macio;
unsigned long flags;
/* B&W G3 and Yikes don't support that properly (the
* sound appear to never come back after beeing shut down).
*/
if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE ||
pmac_mb.model_id == PMAC_TYPE_YIKES)
return 0;
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
if (value) {
LOCK(flags);
MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
UNLOCK(flags);
(void)MACIO_IN32(HEATHROW_FCR);
} else {
LOCK(flags);
MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
UNLOCK(flags);
}
return 0;
}
static u32 save_fcr[6] __pmacdata;
static u32 save_mbcr __pmacdata;
static u32 save_gpio_levels[2] __pmacdata;
static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT] __pmacdata;
static u8 save_gpio_normal[KEYLARGO_GPIO_CNT] __pmacdata;
static u32 save_unin_clock_ctl __pmacdata;
static struct dbdma_regs save_dbdma[13] __pmacdata;
static struct dbdma_regs save_alt_dbdma[13] __pmacdata;
static void __pmac
dbdma_save(struct macio_chip* macio, struct dbdma_regs* save)
{
int i;
/* Save state & config of DBDMA channels */
for (i=0; i<13; i++) {
volatile struct dbdma_regs __iomem * chan = (void __iomem *)
(macio->base + ((0x8000+i*0x100)>>2));
save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi);
save[i].cmdptr = in_le32(&chan->cmdptr);
save[i].intr_sel = in_le32(&chan->intr_sel);
save[i].br_sel = in_le32(&chan->br_sel);
save[i].wait_sel = in_le32(&chan->wait_sel);
}
}
static void __pmac
dbdma_restore(struct macio_chip* macio, struct dbdma_regs* save)
{
int i;
/* Save state & config of DBDMA channels */
for (i=0; i<13; i++) {
volatile struct dbdma_regs __iomem * chan = (void __iomem *)
(macio->base + ((0x8000+i*0x100)>>2));
out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);
while (in_le32(&chan->status) & ACTIVE)
mb();
out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi);
out_le32(&chan->cmdptr, save[i].cmdptr);
out_le32(&chan->intr_sel, save[i].intr_sel);
out_le32(&chan->br_sel, save[i].br_sel);
out_le32(&chan->wait_sel, save[i].wait_sel);
}
}
static void __pmac
heathrow_sleep(struct macio_chip* macio, int secondary)
{
if (secondary) {
dbdma_save(macio, save_alt_dbdma);
save_fcr[2] = MACIO_IN32(0x38);
save_fcr[3] = MACIO_IN32(0x3c);
} else {
dbdma_save(macio, save_dbdma);
save_fcr[0] = MACIO_IN32(0x38);
save_fcr[1] = MACIO_IN32(0x3c);
save_mbcr = MACIO_IN32(0x34);
/* Make sure sound is shut down */
MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
/* This seems to be necessary as well or the fan
* keeps coming up and battery drains fast */
MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE);
MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N);
/* Make sure eth is down even if module or sleep
* won't work properly */
MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET);
}
/* Make sure modem is shut down */
MACIO_OUT8(HRW_GPIO_MODEM_RESET,
MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1);
MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE);
/* Let things settle */
(void)MACIO_IN32(HEATHROW_FCR);
}
static void __pmac
heathrow_wakeup(struct macio_chip* macio, int secondary)
{
if (secondary) {
MACIO_OUT32(0x38, save_fcr[2]);
(void)MACIO_IN32(0x38);
mdelay(1);
MACIO_OUT32(0x3c, save_fcr[3]);
(void)MACIO_IN32(0x38);
mdelay(10);
dbdma_restore(macio, save_alt_dbdma);
} else {
MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE);
(void)MACIO_IN32(0x38);
mdelay(1);
MACIO_OUT32(0x3c, save_fcr[1]);
(void)MACIO_IN32(0x38);
mdelay(1);
MACIO_OUT32(0x34, save_mbcr);
(void)MACIO_IN32(0x38);
mdelay(10);
dbdma_restore(macio, save_dbdma);
}
}
static long __pmac
heathrow_sleep_state(struct device_node* node, long param, long value)
{
if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
return -EPERM;
if (value == 1) {
if (macio_chips[1].type == macio_gatwick)
heathrow_sleep(&macio_chips[0], 1);
heathrow_sleep(&macio_chips[0], 0);
} else if (value == 0) {
heathrow_wakeup(&macio_chips[0], 0);
if (macio_chips[1].type == macio_gatwick)
heathrow_wakeup(&macio_chips[0], 1);
}
return 0;
}
static long __pmac
core99_scc_enable(struct device_node* node, long param, long value)
{
struct macio_chip* macio;
unsigned long flags;
unsigned long chan_mask;
u32 fcr;
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
if (!strcmp(node->name, "ch-a"))
chan_mask = MACIO_FLAG_SCCA_ON;
else if (!strcmp(node->name, "ch-b"))
chan_mask = MACIO_FLAG_SCCB_ON;
else
return -ENODEV;
if (value) {
int need_reset_scc = 0;
int need_reset_irda = 0;
LOCK(flags);
fcr = MACIO_IN32(KEYLARGO_FCR0);
/* Check if scc cell need enabling */
if (!(fcr & KL0_SCC_CELL_ENABLE)) {
fcr |= KL0_SCC_CELL_ENABLE;
need_reset_scc = 1;
}
if (chan_mask & MACIO_FLAG_SCCA_ON) {
fcr |= KL0_SCCA_ENABLE;
/* Don't enable line drivers for I2S modem */
if ((param & 0xfff) == PMAC_SCC_I2S1)
fcr &= ~KL0_SCC_A_INTF_ENABLE;
else
fcr |= KL0_SCC_A_INTF_ENABLE;
}
if (chan_mask & MACIO_FLAG_SCCB_ON) {
fcr |= KL0_SCCB_ENABLE;
/* Perform irda specific inits */
if ((param & 0xfff) == PMAC_SCC_IRDA) {
fcr &= ~KL0_SCC_B_INTF_ENABLE;
fcr |= KL0_IRDA_ENABLE;
fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE;
fcr |= KL0_IRDA_SOURCE1_SEL;
fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
need_reset_irda = 1;
} else
fcr |= KL0_SCC_B_INTF_ENABLE;
}
MACIO_OUT32(KEYLARGO_FCR0, fcr);
macio->flags |= chan_mask;
if (need_reset_scc) {
MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET);
(void)MACIO_IN32(KEYLARGO_FCR0);
UNLOCK(flags);
mdelay(15);
LOCK(flags);
MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET);
}
if (need_reset_irda) {
MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET);
(void)MACIO_IN32(KEYLARGO_FCR0);
UNLOCK(flags);
mdelay(15);
LOCK(flags);
MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET);
}
UNLOCK(flags);
if (param & PMAC_SCC_FLAG_XMON)
macio->flags |= MACIO_FLAG_SCC_LOCKED;
} else {
if (macio->flags & MACIO_FLAG_SCC_LOCKED)
return -EPERM;
LOCK(flags);
fcr = MACIO_IN32(KEYLARGO_FCR0);
if (chan_mask & MACIO_FLAG_SCCA_ON)
fcr &= ~KL0_SCCA_ENABLE;
if (chan_mask & MACIO_FLAG_SCCB_ON) {
fcr &= ~KL0_SCCB_ENABLE;
/* Perform irda specific clears */
if ((param & 0xfff) == PMAC_SCC_IRDA) {
fcr &= ~KL0_IRDA_ENABLE;
fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE);
fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
}
}
MACIO_OUT32(KEYLARGO_FCR0, fcr);
if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) {
fcr &= ~KL0_SCC_CELL_ENABLE;
MACIO_OUT32(KEYLARGO_FCR0, fcr);
}
macio->flags &= ~(chan_mask);
UNLOCK(flags);
mdelay(10);
}
return 0;
}
static long __pmac
core99_modem_enable(struct device_node* node, long param, long value)
{
struct macio_chip* macio;
u8 gpio;
unsigned long flags;
/* Hack for internal USB modem */
if (node == NULL) {
if (macio_chips[0].type != macio_keylargo)
return -ENODEV;
node = macio_chips[0].of_node;
}
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
if (!value) {
LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
UNLOCK(flags);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
mdelay(250);
}
LOCK(flags);
if (value) {
MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
UNLOCK(flags);
(void)MACIO_IN32(KEYLARGO_FCR2);
mdelay(250);
} else {
MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
UNLOCK(flags);
}
if (value) {
LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250); LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250); LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250);
}
return 0;
}
static long __pmac
pangea_modem_enable(struct device_node* node, long param, long value)
{
struct macio_chip* macio;
u8 gpio;
unsigned long flags;
/* Hack for internal USB modem */
if (node == NULL) {
if (macio_chips[0].type != macio_pangea &&
macio_chips[0].type != macio_intrepid)
return -ENODEV;
node = macio_chips[0].of_node;
}
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
if (!value) {
LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
UNLOCK(flags);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
mdelay(250);
}
LOCK(flags);
if (value) {
MACIO_OUT8(KL_GPIO_MODEM_POWER,
KEYLARGO_GPIO_OUTPUT_ENABLE);
UNLOCK(flags);
(void)MACIO_IN32(KEYLARGO_FCR2);
mdelay(250);
} else {
MACIO_OUT8(KL_GPIO_MODEM_POWER,
KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
UNLOCK(flags);
}
if (value) {
LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250); LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250); LOCK(flags);
MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
UNLOCK(flags); mdelay(250);
}
return 0;
}
static long __pmac
core99_ata100_enable(struct device_node* node, long value)
{
unsigned long flags;
struct pci_dev *pdev = NULL;
u8 pbus, pid;
if (uninorth_rev < 0x24)
return -ENODEV;
LOCK(flags);
if (value)
UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
else
UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
(void)UN_IN(UNI_N_CLOCK_CNTL);
UNLOCK(flags);
udelay(20);
if (value) {
if (pci_device_from_OF_node(node, &pbus, &pid) == 0)
pdev = pci_find_slot(pbus, pid);
if (pdev == NULL)
return 0;
pci_enable_device(pdev);
pci_set_master(pdev);
}
return 0;
}
static long __pmac
core99_ide_enable(struct device_node* node, long param, long value)
{
/* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2
* based ata-100
*/
switch(param) {
case 0:
return simple_feature_tweak(node, macio_unknown,
KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value);
case 1:
return simple_feature_tweak(node, macio_unknown,
KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value);
case 2:
return simple_feature_tweak(node, macio_unknown,
KEYLARGO_FCR1, KL1_UIDE_ENABLE, value);
case 3:
return core99_ata100_enable(node, value);
default:
return -ENODEV;
}
}
static long __pmac
core99_ide_reset(struct device_node* node, long param, long value)
{
switch(param) {
case 0:
return simple_feature_tweak(node, macio_unknown,
KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value);
case 1:
return simple_feature_tweak(node, macio_unknown,
KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value);
case 2:
return simple_feature_tweak(node, macio_unknown,
KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value);
default:
return -ENODEV;
}
}
static long __pmac
core99_gmac_enable(struct device_node* node, long param, long value)
{
unsigned long flags;
LOCK(flags);
if (value)
UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
else
UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
(void)UN_IN(UNI_N_CLOCK_CNTL);
UNLOCK(flags);
udelay(20);
return 0;
}
static long __pmac
core99_gmac_phy_reset(struct device_node* node, long param, long value)
{
unsigned long flags;
struct macio_chip* macio;
macio = &macio_chips[0];
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
macio->type != macio_intrepid)
return -ENODEV;
LOCK(flags);
MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE);
(void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET);
UNLOCK(flags);
mdelay(10);
LOCK(flags);
MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */
KEYLARGO_GPIO_OUTOUT_DATA);
UNLOCK(flags);
mdelay(10);
return 0;
}
static long __pmac
core99_sound_chip_enable(struct device_node* node, long param, long value)
{
struct macio_chip* macio;
unsigned long flags;
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
/* Do a better probe code, screamer G4 desktops &
* iMacs can do that too, add a recalibrate in
* the driver as well
*/
if (pmac_mb.model_id == PMAC_TYPE_PISMO ||
pmac_mb.model_id == PMAC_TYPE_TITANIUM) {
LOCK(flags);
if (value)
MACIO_OUT8(KL_GPIO_SOUND_POWER,
KEYLARGO_GPIO_OUTPUT_ENABLE |
KEYLARGO_GPIO_OUTOUT_DATA);
else
MACIO_OUT8(KL_GPIO_SOUND_POWER,
KEYLARGO_GPIO_OUTPUT_ENABLE);
(void)MACIO_IN8(KL_GPIO_SOUND_POWER);
UNLOCK(flags);
}
return 0;
}
static long __pmac
core99_airport_enable(struct device_node* node, long param, long value)
{
struct macio_chip* macio;
unsigned long flags;
int state;
macio = macio_find(node, 0);
if (!macio)
return -ENODEV;
/* Hint: we allow passing of macio itself for the sake of the
* sleep code
*/
if (node != macio->of_node &&
(!node->parent || node->parent != macio->of_node))
return -ENODEV;
state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0;
if (value == state)
return 0;
if (value) {
/* This code is a reproduction of OF enable-cardslot
* and init-wireless methods, slightly hacked until
* I got it working.
*/
LOCK(flags);
MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5);
(void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
UNLOCK(flags);
mdelay(10);
LOCK(flags);
MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4);
(void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
UNLOCK(flags);
mdelay(10);
LOCK(flags);
MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
(void)MACIO_IN32(KEYLARGO_FCR2);
udelay(10);
MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0);
(void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb);
udelay(10);
MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28);
(void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa);
udelay(10);
MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28);
(void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd);
udelay(10);
MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28);
(void)MACIO_IN8(KEYLARGO_GPIO_0+0xd);
udelay(10);
MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28);
(void)MACIO_IN8(KEYLARGO_GPIO_0+0xe);
UNLOCK(flags);
udelay(10);
MACIO_OUT32(0x1c000, 0);
mdelay(1);
MACIO_OUT8(0x1a3e0, 0x41);
(void)MACIO_IN8(0x1a3e0);
udelay(10);
LOCK(flags);
MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16);
(void)MACIO_IN32(KEYLARGO_FCR2);
UNLOCK(flags);
mdelay(100);
macio->flags |= MACIO_FLAG_AIRPORT_ON;
} else {
LOCK(flags);
MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
(void)MACIO_IN32(KEYLARGO_FCR2);
MACIO_OUT8(KL_GPIO_AIRPORT_0, 0);
MACIO_OUT8(KL_GPIO_AIRPORT_1, 0);
MACIO_OUT8(KL_GPIO_AIRPORT_2, 0);
MACIO_OUT8(KL_GPIO_AIRPORT_3, 0);
MACIO_OUT8(KL_GPIO_AIRPORT_4, 0);
(void)MACIO_IN8(KL_GPIO_AIRPORT_4);
UNLOCK(flags);
macio->flags &= ~MACIO_FLAG_AIRPORT_ON;
}
return 0;
}
#ifdef CONFIG_SMP
static long __pmac
core99_reset_cpu(struct device_node* node, long param, long value)
{
unsigned int reset_io = 0;
unsigned long flags;
struct macio_chip* macio;
struct device_node* np;
const int dflt_reset_lines[] = { KL_GPIO_RESET_CPU0,
KL_GPIO_RESET_CPU1,
KL_GPIO_RESET_CPU2,
KL_GPIO_RESET_CPU3 };
macio = &macio_chips[0];
if (macio->type != macio_keylargo)
return -ENODEV;
np = find_path_device("/cpus");
if (np == NULL)
return -ENODEV;
for (np = np->child; np != NULL; np = np->sibling) {
u32* num = (u32 *)get_property(np, "reg", NULL);
u32* rst = (u32 *)get_property(np, "soft-reset", NULL);
if (num == NULL || rst == NULL)
continue;
if (param == *num) {
reset_io = *rst;
break;
}
}
if (np == NULL || reset_io == 0)
reset_io = dflt_reset_lines[param];
LOCK(flags);
MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
(void)MACIO_IN8(reset_io);
udelay(1);
MACIO_OUT8(reset_io, 0);
(void)MACIO_IN8(reset_io);
UNLOCK(flags);
return 0;
}
#endif /* CONFIG_SMP */
static long __pmac
core99_usb_enable(struct device_node* node, long param, long value)
{
struct macio_chip* macio;
unsigned long flags;
char* prop;
int number;
u32 reg;
macio = &macio_chips[0];
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
macio->type != macio_intrepid)
return -ENODEV;
prop = (char *)get_property(node, "AAPL,clock-id", NULL);
if (!prop)
return -ENODEV;
if (strncmp(prop, "usb0u048", 8) == 0)
number = 0;
else if (strncmp(prop, "usb1u148", 8) == 0)
number = 2;
else if (strncmp(prop, "usb2u248", 8) == 0)
number = 4;
else
return -ENODEV;
/* Sorry for the brute-force locking, but this is only used during
* sleep and the timing seem to be critical
*/
LOCK(flags);
if (value) {
/* Turn ON */
if (number == 0) {
MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
(void)MACIO_IN32(KEYLARGO_FCR0);
UNLOCK(flags);
mdelay(1);
LOCK(flags);
MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
} else if (number == 2) {
MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
UNLOCK(flags);
(void)MACIO_IN32(KEYLARGO_FCR0);
mdelay(1);
LOCK(flags);
MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
} else if (number == 4) {
MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
UNLOCK(flags);
(void)MACIO_IN32(KEYLARGO_FCR1);
mdelay(1);
LOCK(flags);
MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE);
}
if (number < 4) {
reg = MACIO_IN32(KEYLARGO_FCR4);
reg &= ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number));
reg &= ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1));
MACIO_OUT32(KEYLARGO_FCR4, reg);
(void)MACIO_IN32(KEYLARGO_FCR4);
udelay(10);
} else {
reg = MACIO_IN32(KEYLARGO_FCR3);
reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0));
reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1));
MACIO_OUT32(KEYLARGO_FCR3, reg);
(void)MACIO_IN32(KEYLARGO_FCR3);
udelay(10);
}
if (macio->type == macio_intrepid) {
/* wait for clock stopped bits to clear */
u32 test0 = 0, test1 = 0;
u32 status0, status1;
int timeout = 1000;
UNLOCK(flags);
switch (number) {
case 0:
test0 = UNI_N_CLOCK_STOPPED_USB0;
test1 = UNI_N_CLOCK_STOPPED_USB0PCI;
break;
case 2:
test0 = UNI_N_CLOCK_STOPPED_USB1;
test1 = UNI_N_CLOCK_STOPPED_USB1PCI;
break;
case 4:
test0 = UNI_N_CLOCK_STOPPED_USB2;
test1 = UNI_N_CLOCK_STOPPED_USB2PCI;
break;
}
do {
if (--timeout <= 0) {
printk(KERN_ERR "core99_usb_enable: "
"Timeout waiting for clocks\n");
break;
}
mdelay(1);
status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0);
status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1);
} while ((status0 & test0) | (status1 & test1));
LOCK(flags);
}
} else {
/* Turn OFF */
if (number < 4) {
reg = MACIO_IN32(KEYLARGO_FCR4);
reg |= KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number);
reg |= KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1);
MACIO_OUT32(KEYLARGO_FCR4, reg);
(void)MACIO_IN32(KEYLARGO_FCR4);
udelay(1);
} else {
reg = MACIO_IN32(KEYLARGO_FCR3);
reg |= KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0);
reg |= KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1);
MACIO_OUT32(KEYLARGO_FCR3, reg);
(void)MACIO_IN32(KEYLARGO_FCR3);
udelay(1);
}
if (number == 0) {
if (macio->type != macio_intrepid)
MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
(void)MACIO_IN32(KEYLARGO_FCR0);
udelay(1);
MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
(void)MACIO_IN32(KEYLARGO_FCR0);
} else if (number == 2) {
if (macio->type != macio_intrepid)
MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
(void)MACIO_IN32(KEYLARGO_FCR0);
udelay(1);
MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
(void)MACIO_IN32(KEYLARGO_FCR0);
} else if (number == 4) {
udelay(1);
MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
(void)MACIO_IN32(KEYLARGO_FCR1);
}
udelay(1);
}
UNLOCK(flags);
return 0;
}
static long __pmac
core99_firewire_enable(struct device_node* node, long param, long value)
{
unsigned long flags;
struct macio_chip* macio;
macio = &macio_chips[0];
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
macio->type != macio_intrepid)
return -ENODEV;
if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
return -ENODEV;
LOCK(flags);
if (value) {
UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
(void)UN_IN(UNI_N_CLOCK_CNTL);
} else {
UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
(void)UN_IN(UNI_N_CLOCK_CNTL);
}
UNLOCK(flags);
mdelay(1);
return 0;
}
static long __pmac
core99_firewire_cable_power(struct device_node* node, long param, long value)
{
unsigned long flags;
struct macio_chip* macio;
/* Trick: we allow NULL node */
if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0)
return -ENODEV;
macio = &macio_chips[0];
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
macio->type != macio_intrepid)
return -ENODEV;
if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
return -ENODEV;
LOCK(flags);
if (value) {
MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0);
MACIO_IN8(KL_GPIO_FW_CABLE_POWER);
udelay(10);
} else {
MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4);
MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10);
}
UNLOCK(flags);
mdelay(1);
return 0;
}
static long __pmac
intrepid_aack_delay_enable(struct device_node* node, long param, long value)
{
unsigned long flags;
if (uninorth_rev < 0xd2)
return -ENODEV;
LOCK(flags);
if (param)
UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
else
UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
UNLOCK(flags);
return 0;
}
#endif /* CONFIG_POWER4 */
static long __pmac
core99_read_gpio(struct device_node* node, long param, long value)
{
struct macio_chip* macio = &macio_chips[0];
return MACIO_IN8(param);
}
static long __pmac
core99_write_gpio(struct device_node* node, long param, long value)
{
struct macio_chip* macio = &macio_chips[0];
MACIO_OUT8(param, (u8)(value & 0xff));
return 0;
}
#ifdef CONFIG_POWER4
static long __pmac
g5_gmac_enable(struct device_node* node, long param, long value)
{
struct macio_chip* macio = &macio_chips[0];
unsigned long flags;
u8 pbus, pid;
LOCK(flags);
if (value) {
MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
mb();
k2_skiplist[0] = NULL;
} else {
k2_skiplist[0] = node;
mb();
MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
}
UNLOCK(flags);
mdelay(1);
return 0;
}
static long __pmac
g5_fw_enable(struct device_node* node, long param, long value)
{
struct macio_chip* macio = &macio_chips[0];
unsigned long flags;
LOCK(flags);
if (value) {
MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
mb();
k2_skiplist[1] = NULL;
} else {
k2_skiplist[1] = node;
mb();
MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
}
UNLOCK(flags);
mdelay(1);
return 0;
}
static long __pmac
g5_mpic_enable(struct device_node* node, long param, long value)
{
unsigned long flags;
if (node->parent == NULL || strcmp(node->parent->name, "u3"))
return 0;
LOCK(flags);
UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE);
UNLOCK(flags);
return 0;
}
#ifdef CONFIG_SMP
static long __pmac
g5_reset_cpu(struct device_node* node, long param, long value)
{
unsigned int reset_io = 0;
unsigned long flags;
struct macio_chip* macio;
struct device_node* np;
macio = &macio_chips[0];
if (macio->type != macio_keylargo2)
return -ENODEV;
np = find_path_device("/cpus");
if (np == NULL)
return -ENODEV;
for (np = np->child; np != NULL; np = np->sibling) {
u32* num = (u32 *)get_property(np, "reg", NULL);
u32* rst = (u32 *)get_property(np, "soft-reset", NULL);
if (num == NULL || rst == NULL)
continue;
if (param == *num) {
reset_io = *rst;
break;
}
}
if (np == NULL || reset_io == 0)
return -ENODEV;
LOCK(flags);
MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
(void)MACIO_IN8(reset_io);
udelay(1);
MACIO_OUT8(reset_io, 0);
(void)MACIO_IN8(reset_io);
UNLOCK(flags);
return 0;
}
#endif /* CONFIG_SMP */
/*
* This can be called from pmac_smp so isn't static
*
* This takes the second CPU off the bus on dual CPU machines
* running UP
*/
void __pmac g5_phy_disable_cpu1(void)
{
UN_OUT(U3_API_PHY_CONFIG_1, 0);
}
#endif /* CONFIG_POWER4 */
#ifndef CONFIG_POWER4
static void __pmac
keylargo_shutdown(struct macio_chip* macio, int sleep_mode)
{
u32 temp;
if (sleep_mode) {
mdelay(1);
MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND);
(void)MACIO_IN32(KEYLARGO_FCR0);
mdelay(1);
}
MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
KL0_SCC_CELL_ENABLE |
KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE |
KL0_IRDA_CLK19_ENABLE);
MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK);
MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE);
MACIO_BIC(KEYLARGO_FCR1,
KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N |
KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N |
KL1_UIDE_ENABLE);
MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE);
temp = MACIO_IN32(KEYLARGO_FCR3);
if (macio->rev >= 2) {
temp |= KL3_SHUTDOWN_PLL2X;
if (sleep_mode)
temp |= KL3_SHUTDOWN_PLL_TOTAL;
}
temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
KL3_SHUTDOWN_PLLKW35;
if (sleep_mode)
temp |= KL3_SHUTDOWN_PLLKW12;
temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE
| KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
if (sleep_mode)
temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE);
MACIO_OUT32(KEYLARGO_FCR3, temp);
/* Flush posted writes & wait a bit */
(void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
}
static void __pmac
pangea_shutdown(struct macio_chip* macio, int sleep_mode)
{
u32 temp;
MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
KL0_SCC_CELL_ENABLE |
KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE);
MACIO_BIC(KEYLARGO_FCR1,
KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
KL1_UIDE_ENABLE);
if (pmac_mb.board_flags & PMAC_MB_MOBILE)
MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
temp = MACIO_IN32(KEYLARGO_FCR3);
temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
KL3_SHUTDOWN_PLLKW35;
temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE
| KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE);
if (sleep_mode)
temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE);
MACIO_OUT32(KEYLARGO_FCR3, temp);
/* Flush posted writes & wait a bit */
(void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
}
static void __pmac
intrepid_shutdown(struct macio_chip* macio, int sleep_mode)
{
u32 temp;
MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
KL0_SCC_CELL_ENABLE);
MACIO_BIC(KEYLARGO_FCR1,
/*KL1_USB2_CELL_ENABLE |*/
KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE);
if (pmac_mb.board_flags & PMAC_MB_MOBILE)
MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
temp = MACIO_IN32(KEYLARGO_FCR3);
temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE |
KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
if (sleep_mode)
temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE);
MACIO_OUT32(KEYLARGO_FCR3, temp);
/* Flush posted writes & wait a bit */
(void)MACIO_IN32(KEYLARGO_FCR0);
mdelay(10);
}
static int __pmac
core99_sleep(void)
{
struct macio_chip* macio;
int i;
macio = &macio_chips[0];
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
macio->type != macio_intrepid)
return -ENODEV;
/* The device-tree contains that in the hwclock node */
if (macio->type == macio_intrepid) {
UN_OUT(UNI_N_CLOCK_SPREADING, 0);
mdelay(40);
}
/* We power off the wireless slot in case it was not done
* by the driver. We don't power it on automatically however
*/
if (macio->flags & MACIO_FLAG_AIRPORT_ON)
core99_airport_enable(macio->of_node, 0, 0);
/* We power off the FW cable. Should be done by the driver... */
if (macio->flags & MACIO_FLAG_FW_SUPPORTED) {
core99_firewire_enable(NULL, 0, 0);
core99_firewire_cable_power(NULL, 0, 0);
}
/* We make sure int. modem is off (in case driver lost it) */
if (macio->type == macio_keylargo)
core99_modem_enable(macio->of_node, 0, 0);
else
pangea_modem_enable(macio->of_node, 0, 0);
/* We make sure the sound is off as well */
core99_sound_chip_enable(macio->of_node, 0, 0);
/*
* Save various bits of KeyLargo
*/
/* Save the state of the various GPIOs */
save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0);
save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1);
for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i);
for (i=0; i<KEYLARGO_GPIO_CNT; i++)
save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i);
/* Save the FCRs */
if (macio->type == macio_keylargo)
save_mbcr = MACIO_IN32(KEYLARGO_MBCR);
save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0);
save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1);
save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2);
save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3);
save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4);
if (macio->type == macio_pangea || macio->type == macio_intrepid)
save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5);
/* Save state & config of DBDMA channels */
dbdma_save(macio, save_dbdma);
/*
* Turn off as much as we can
*/
if (macio->type == macio_pangea)
pangea_shutdown(macio, 1);
else if (macio->type == macio_intrepid)
intrepid_shutdown(macio, 1);
else if (macio->type == macio_keylargo)
keylargo_shutdown(macio, 1);
/*
* Put the host bridge to sleep
*/
save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL);
/* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it
* enabled !
*/
UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl &
~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/));
udelay(100);
UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP);
mdelay(10);
/*
* FIXME: A bit of black magic with OpenPIC (don't ask me why)
*/
if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
MACIO_BIS(0x506e0, 0x00400000);
MACIO_BIS(0x506e0, 0x80000000);
}
return 0;
}
static int __pmac
core99_wake_up(void)
{
struct macio_chip* macio;
int i;
macio = &macio_chips[0];
if (macio->type != macio_keylargo && macio->type != macio_pangea &&
macio->type != macio_intrepid)
return -ENODEV;
/*
* Wakeup the host bridge
*/
UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
udelay(10);
UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
udelay(10);
/*
* Restore KeyLargo
*/
if (macio->type == macio_keylargo) {
MACIO_OUT32(KEYLARGO_MBCR, save_mbcr);
(void)MACIO_IN32(KEYLARGO_MBCR); udelay(10);
}
MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]);
(void)MACIO_IN32(KEYLARGO_FCR0); udelay(10);
MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]);
(void)MACIO_IN32(KEYLARGO_FCR1); udelay(10);
MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]);
(void)MACIO_IN32(KEYLARGO_FCR2); udelay(10);
MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]);
(void)MACIO_IN32(KEYLARGO_FCR3); udelay(10);
MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]);
(void)MACIO_IN32(KEYLARGO_FCR4); udelay(10);
if (macio->type == macio_pangea || macio->type == macio_intrepid) {
MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]);
(void)MACIO_IN32(KEYLARGO_FCR5); udelay(10);
}
dbdma_restore(macio, save_dbdma);
MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]);
MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]);
for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]);
for (i=0; i<KEYLARGO_GPIO_CNT; i++)
MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]);
/* FIXME more black magic with OpenPIC ... */
if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
MACIO_BIC(0x506e0, 0x00400000);
MACIO_BIC(0x506e0, 0x80000000);
}
UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl);
udelay(100);
/* Restore clock spreading */
if (macio->type == macio_intrepid) {
UN_OUT(UNI_N_CLOCK_SPREADING, 2);
mdelay(40);
}
return 0;
}
static long __pmac
core99_sleep_state(struct device_node* node, long param, long value)
{
/* Param == 1 means to enter the "fake sleep" mode that is
* used for CPU speed switch
*/
if (param == 1) {
if (value == 1) {
UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_IDLE2);
} else {
UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
udelay(10);
UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
udelay(10);
}
return 0;
}
if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
return -EPERM;
if (value == 1)
return core99_sleep();
else if (value == 0)
return core99_wake_up();
return 0;
}
#endif /* CONFIG_POWER4 */
static long __pmac
generic_dev_can_wake(struct device_node* node, long param, long value)
{
/* Todo: eventually check we are really dealing with on-board
* video device ...
*/
if (pmac_mb.board_flags & PMAC_MB_MAY_SLEEP)
pmac_mb.board_flags |= PMAC_MB_CAN_SLEEP;
return 0;
}
static long __pmac
generic_get_mb_info(struct device_node* node, long param, long value)
{
switch(param) {
case PMAC_MB_INFO_MODEL:
return pmac_mb.model_id;
case PMAC_MB_INFO_FLAGS:
return pmac_mb.board_flags;
case PMAC_MB_INFO_NAME:
/* hack hack hack... but should work */
*((const char **)value) = pmac_mb.model_name;
return 0;
}
return -EINVAL;
}
/*
* Table definitions
*/
/* Used on any machine
*/
static struct feature_table_entry any_features[] __pmacdata = {
{ PMAC_FTR_GET_MB_INFO, generic_get_mb_info },
{ PMAC_FTR_DEVICE_CAN_WAKE, generic_dev_can_wake },
{ 0, NULL }
};
#ifndef CONFIG_POWER4
/* OHare based motherboards. Currently, we only use these on the
* 2400,3400 and 3500 series powerbooks. Some older desktops seem
* to have issues with turning on/off those asic cells
*/
static struct feature_table_entry ohare_features[] __pmacdata = {
{ PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
{ PMAC_FTR_SWIM3_ENABLE, ohare_floppy_enable },
{ PMAC_FTR_MESH_ENABLE, ohare_mesh_enable },
{ PMAC_FTR_IDE_ENABLE, ohare_ide_enable},
{ PMAC_FTR_IDE_RESET, ohare_ide_reset},
{ PMAC_FTR_SLEEP_STATE, ohare_sleep_state },
{ 0, NULL }
};
/* Heathrow desktop machines (Beige G3).
* Separated as some features couldn't be properly tested
* and the serial port control bits appear to confuse it.
*/
static struct feature_table_entry heathrow_desktop_features[] __pmacdata = {
{ PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
{ PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
{ PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
{ PMAC_FTR_IDE_RESET, heathrow_ide_reset },
{ PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
{ 0, NULL }
};
/* Heathrow based laptop, that is the Wallstreet and mainstreet
* powerbooks.
*/
static struct feature_table_entry heathrow_laptop_features[] __pmacdata = {
{ PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
{ PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable },
{ PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
{ PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
{ PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
{ PMAC_FTR_IDE_RESET, heathrow_ide_reset },
{ PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
{ PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable },
{ PMAC_FTR_SLEEP_STATE, heathrow_sleep_state },
{ 0, NULL }
};
/* Paddington based machines
* The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4.
*/
static struct feature_table_entry paddington_features[] __pmacdata = {
{ PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
{ PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable },
{ PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
{ PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
{ PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
{ PMAC_FTR_IDE_RESET, heathrow_ide_reset },
{ PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
{ PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable },
{ PMAC_FTR_SLEEP_STATE, heathrow_sleep_state },
{ 0, NULL }
};
/* Core99 & MacRISC 2 machines (all machines released since the
* iBook (included), that is all AGP machines, except pangea
* chipset. The pangea chipset is the "combo" UniNorth/KeyLargo
* used on iBook2 & iMac "flow power".
*/
static struct feature_table_entry core99_features[] __pmacdata = {
{ PMAC_FTR_SCC_ENABLE, core99_scc_enable },
{ PMAC_FTR_MODEM_ENABLE, core99_modem_enable },
{ PMAC_FTR_IDE_ENABLE, core99_ide_enable },
{ PMAC_FTR_IDE_RESET, core99_ide_reset },
{ PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
{ PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
{ PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
{ PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
{ PMAC_FTR_USB_ENABLE, core99_usb_enable },
{ PMAC_FTR_1394_ENABLE, core99_firewire_enable },
{ PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
{ PMAC_FTR_SLEEP_STATE, core99_sleep_state },
#ifdef CONFIG_SMP
{ PMAC_FTR_RESET_CPU, core99_reset_cpu },
#endif /* CONFIG_SMP */
{ PMAC_FTR_READ_GPIO, core99_read_gpio },
{ PMAC_FTR_WRITE_GPIO, core99_write_gpio },
{ 0, NULL }
};
/* RackMac
*/
static struct feature_table_entry rackmac_features[] __pmacdata = {
{ PMAC_FTR_SCC_ENABLE, core99_scc_enable },
{ PMAC_FTR_IDE_ENABLE, core99_ide_enable },
{ PMAC_FTR_IDE_RESET, core99_ide_reset },
{ PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
{ PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
{ PMAC_FTR_USB_ENABLE, core99_usb_enable },
{ PMAC_FTR_1394_ENABLE, core99_firewire_enable },
{ PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
{ PMAC_FTR_SLEEP_STATE, core99_sleep_state },
#ifdef CONFIG_SMP
{ PMAC_FTR_RESET_CPU, core99_reset_cpu },
#endif /* CONFIG_SMP */
{ PMAC_FTR_READ_GPIO, core99_read_gpio },
{ PMAC_FTR_WRITE_GPIO, core99_write_gpio },
{ 0, NULL }
};
/* Pangea features
*/
static struct feature_table_entry pangea_features[] __pmacdata = {
{ PMAC_FTR_SCC_ENABLE, core99_scc_enable },
{ PMAC_FTR_MODEM_ENABLE, pangea_modem_enable },
{ PMAC_FTR_IDE_ENABLE, core99_ide_enable },
{ PMAC_FTR_IDE_RESET, core99_ide_reset },
{ PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
{ PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
{ PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
{ PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
{ PMAC_FTR_USB_ENABLE, core99_usb_enable },
{ PMAC_FTR_1394_ENABLE, core99_firewire_enable },
{ PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
{ PMAC_FTR_SLEEP_STATE, core99_sleep_state },
{ PMAC_FTR_READ_GPIO, core99_read_gpio },
{ PMAC_FTR_WRITE_GPIO, core99_write_gpio },
{ 0, NULL }
};
/* Intrepid features
*/
static struct feature_table_entry intrepid_features[] __pmacdata = {
{ PMAC_FTR_SCC_ENABLE, core99_scc_enable },
{ PMAC_FTR_MODEM_ENABLE, pangea_modem_enable },
{ PMAC_FTR_IDE_ENABLE, core99_ide_enable },
{ PMAC_FTR_IDE_RESET, core99_ide_reset },
{ PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
{ PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
{ PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
{ PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
{ PMAC_FTR_USB_ENABLE, core99_usb_enable },
{ PMAC_FTR_1394_ENABLE, core99_firewire_enable },
{ PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
{ PMAC_FTR_SLEEP_STATE, core99_sleep_state },
{ PMAC_FTR_READ_GPIO, core99_read_gpio },
{ PMAC_FTR_WRITE_GPIO, core99_write_gpio },
{ PMAC_FTR_AACK_DELAY_ENABLE, intrepid_aack_delay_enable },
{ 0, NULL }
};
#else /* CONFIG_POWER4 */
/* G5 features
*/
static struct feature_table_entry g5_features[] __pmacdata = {
{ PMAC_FTR_GMAC_ENABLE, g5_gmac_enable },
{ PMAC_FTR_1394_ENABLE, g5_fw_enable },
{ PMAC_FTR_ENABLE_MPIC, g5_mpic_enable },
#ifdef CONFIG_SMP
{ PMAC_FTR_RESET_CPU, g5_reset_cpu },
#endif /* CONFIG_SMP */
{ PMAC_FTR_READ_GPIO, core99_read_gpio },
{ PMAC_FTR_WRITE_GPIO, core99_write_gpio },
{ 0, NULL }
};
#endif /* CONFIG_POWER4 */
static struct pmac_mb_def pmac_mb_defs[] __pmacdata = {
#ifndef CONFIG_POWER4
/*
* Desktops
*/
{ "AAPL,8500", "PowerMac 8500/8600",
PMAC_TYPE_PSURGE, NULL,
0
},
{ "AAPL,9500", "PowerMac 9500/9600",
PMAC_TYPE_PSURGE, NULL,
0
},
{ "AAPL,7200", "PowerMac 7200",
PMAC_TYPE_PSURGE, NULL,
0
},
{ "AAPL,7300", "PowerMac 7200/7300",
PMAC_TYPE_PSURGE, NULL,
0
},
{ "AAPL,7500", "PowerMac 7500",
PMAC_TYPE_PSURGE, NULL,
0
},
{ "AAPL,ShinerESB", "Apple Network Server",
PMAC_TYPE_ANS, NULL,
0
},
{ "AAPL,e407", "Alchemy",
PMAC_TYPE_ALCHEMY, NULL,
0
},
{ "AAPL,e411", "Gazelle",
PMAC_TYPE_GAZELLE, NULL,
0
},
{ "AAPL,Gossamer", "PowerMac G3 (Gossamer)",
PMAC_TYPE_GOSSAMER, heathrow_desktop_features,
0
},
{ "AAPL,PowerMac G3", "PowerMac G3 (Silk)",
PMAC_TYPE_SILK, heathrow_desktop_features,
0
},
{ "PowerMac1,1", "Blue&White G3",
PMAC_TYPE_YOSEMITE, paddington_features,
0
},
{ "PowerMac1,2", "PowerMac G4 PCI Graphics",
PMAC_TYPE_YIKES, paddington_features,
0
},
{ "PowerMac2,1", "iMac FireWire",
PMAC_TYPE_FW_IMAC, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
},
{ "PowerMac2,2", "iMac FireWire",
PMAC_TYPE_FW_IMAC, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
},
{ "PowerMac3,1", "PowerMac G4 AGP Graphics",
PMAC_TYPE_SAWTOOTH, core99_features,
PMAC_MB_OLD_CORE99
},
{ "PowerMac3,2", "PowerMac G4 AGP Graphics",
PMAC_TYPE_SAWTOOTH, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
},
{ "PowerMac3,3", "PowerMac G4 AGP Graphics",
PMAC_TYPE_SAWTOOTH, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
},
{ "PowerMac3,4", "PowerMac G4 Silver",
PMAC_TYPE_QUICKSILVER, core99_features,
PMAC_MB_MAY_SLEEP
},
{ "PowerMac3,5", "PowerMac G4 Silver",
PMAC_TYPE_QUICKSILVER, core99_features,
PMAC_MB_MAY_SLEEP
},
{ "PowerMac3,6", "PowerMac G4 Windtunnel",
PMAC_TYPE_WINDTUNNEL, core99_features,
PMAC_MB_MAY_SLEEP,
},
{ "PowerMac4,1", "iMac \"Flower Power\"",
PMAC_TYPE_PANGEA_IMAC, pangea_features,
PMAC_MB_MAY_SLEEP
},
{ "PowerMac4,2", "Flat panel iMac",
PMAC_TYPE_FLAT_PANEL_IMAC, pangea_features,
PMAC_MB_CAN_SLEEP
},
{ "PowerMac4,4", "eMac",
PMAC_TYPE_EMAC, core99_features,
PMAC_MB_MAY_SLEEP
},
{ "PowerMac5,1", "PowerMac G4 Cube",
PMAC_TYPE_CUBE, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
},
{ "PowerMac6,1", "Flat panel iMac",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP,
},
{ "PowerMac6,3", "Flat panel iMac",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP,
},
{ "PowerMac6,4", "eMac",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP,
},
{ "PowerMac10,1", "Mac mini",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER,
},
{ "iMac,1", "iMac (first generation)",
PMAC_TYPE_ORIG_IMAC, paddington_features,
0
},
/*
* Xserve's
*/
{ "RackMac1,1", "XServe",
PMAC_TYPE_RACKMAC, rackmac_features,
0,
},
{ "RackMac1,2", "XServe rev. 2",
PMAC_TYPE_RACKMAC, rackmac_features,
0,
},
/*
* Laptops
*/
{ "AAPL,3400/2400", "PowerBook 3400",
PMAC_TYPE_HOOPER, ohare_features,
PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
},
{ "AAPL,3500", "PowerBook 3500",
PMAC_TYPE_KANGA, ohare_features,
PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
},
{ "AAPL,PowerBook1998", "PowerBook Wallstreet",
PMAC_TYPE_WALLSTREET, heathrow_laptop_features,
PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
},
{ "PowerBook1,1", "PowerBook 101 (Lombard)",
PMAC_TYPE_101_PBOOK, paddington_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE
},
{ "PowerBook2,1", "iBook (first generation)",
PMAC_TYPE_ORIG_IBOOK, core99_features,
PMAC_MB_CAN_SLEEP | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
},
{ "PowerBook2,2", "iBook FireWire",
PMAC_TYPE_FW_IBOOK, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
},
{ "PowerBook3,1", "PowerBook Pismo",
PMAC_TYPE_PISMO, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
},
{ "PowerBook3,2", "PowerBook Titanium",
PMAC_TYPE_TITANIUM, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
},
{ "PowerBook3,3", "PowerBook Titanium II",
PMAC_TYPE_TITANIUM2, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
},
{ "PowerBook3,4", "PowerBook Titanium III",
PMAC_TYPE_TITANIUM3, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
},
{ "PowerBook3,5", "PowerBook Titanium IV",
PMAC_TYPE_TITANIUM4, core99_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
},
{ "PowerBook4,1", "iBook 2",
PMAC_TYPE_IBOOK2, pangea_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
},
{ "PowerBook4,2", "iBook 2",
PMAC_TYPE_IBOOK2, pangea_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
},
{ "PowerBook4,3", "iBook 2 rev. 2",
PMAC_TYPE_IBOOK2, pangea_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
},
{ "PowerBook5,1", "PowerBook G4 17\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook5,2", "PowerBook G4 15\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook5,3", "PowerBook G4 17\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook5,4", "PowerBook G4 15\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook5,5", "PowerBook G4 17\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook5,6", "PowerBook G4 15\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook5,7", "PowerBook G4 17\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook6,1", "PowerBook G4 12\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook6,2", "PowerBook G4",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook6,3", "iBook G4",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook6,4", "PowerBook G4 12\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook6,5", "iBook G4",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
{ "PowerBook6,8", "PowerBook G4 12\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
#else /* CONFIG_POWER4 */
{ "PowerMac7,2", "PowerMac G5",
PMAC_TYPE_POWERMAC_G5, g5_features,
0,
},
#endif /* CONFIG_POWER4 */
};
/*
* The toplevel feature_call callback
*/
long __pmac
pmac_do_feature_call(unsigned int selector, ...)
{
struct device_node* node;
long param, value;
int i;
feature_call func = NULL;
va_list args;
if (pmac_mb.features)
for (i=0; pmac_mb.features[i].function; i++)
if (pmac_mb.features[i].selector == selector) {
func = pmac_mb.features[i].function;
break;
}
if (!func)
for (i=0; any_features[i].function; i++)
if (any_features[i].selector == selector) {
func = any_features[i].function;
break;
}
if (!func)
return -ENODEV;
va_start(args, selector);
node = (struct device_node*)va_arg(args, void*);
param = va_arg(args, long);
value = va_arg(args, long);
va_end(args);
return func(node, param, value);
}
static int __init
probe_motherboard(void)
{
int i;
struct macio_chip* macio = &macio_chips[0];
const char* model = NULL;
struct device_node *dt;
/* Lookup known motherboard type in device-tree. First try an
* exact match on the "model" property, then try a "compatible"
* match is none is found.
*/
dt = find_devices("device-tree");
if (dt != NULL)
model = (const char *) get_property(dt, "model", NULL);
for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
pmac_mb = pmac_mb_defs[i];
goto found;
}
}
for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
pmac_mb = pmac_mb_defs[i];
goto found;
}
}
/* Fallback to selection depending on mac-io chip type */
switch(macio->type) {
#ifndef CONFIG_POWER4
case macio_grand_central:
pmac_mb.model_id = PMAC_TYPE_PSURGE;
pmac_mb.model_name = "Unknown PowerSurge";
break;
case macio_ohare:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE;
pmac_mb.model_name = "Unknown OHare-based";
break;
case macio_heathrow:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW;
pmac_mb.model_name = "Unknown Heathrow-based";
pmac_mb.features = heathrow_desktop_features;
break;
case macio_paddington:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON;
pmac_mb.model_name = "Unknown Paddington-based";
pmac_mb.features = paddington_features;
break;
case macio_keylargo:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99;
pmac_mb.model_name = "Unknown Keylargo-based";
pmac_mb.features = core99_features;
break;
case macio_pangea:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA;
pmac_mb.model_name = "Unknown Pangea-based";
pmac_mb.features = pangea_features;
break;
case macio_intrepid:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID;
pmac_mb.model_name = "Unknown Intrepid-based";
pmac_mb.features = intrepid_features;
break;
#else /* CONFIG_POWER4 */
case macio_keylargo2:
pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2;
pmac_mb.model_name = "Unknown G5";
pmac_mb.features = g5_features;
break;
#endif /* CONFIG_POWER4 */
default:
return -ENODEV;
}
found:
#ifndef CONFIG_POWER4
/* Fixup Hooper vs. Comet */
if (pmac_mb.model_id == PMAC_TYPE_HOOPER) {
u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4);
if (!mach_id_ptr)
return -ENODEV;
/* Here, I used to disable the media-bay on comet. It
* appears this is wrong, the floppy connector is actually
* a kind of media-bay and works with the current driver.
*/
if (__raw_readl(mach_id_ptr) & 0x20000000UL)
pmac_mb.model_id = PMAC_TYPE_COMET;
iounmap(mach_id_ptr);
}
#endif /* CONFIG_POWER4 */
#ifdef CONFIG_6xx
/* Set default value of powersave_nap on machines that support it.
* It appears that uninorth rev 3 has a problem with it, we don't
* enable it on those. In theory, the flush-on-lock property is
* supposed to be set when not supported, but I'm not very confident
* that all Apple OF revs did it properly, I do it the paranoid way.
*/
while (uninorth_base && uninorth_rev > 3) {
struct device_node* np = find_path_device("/cpus");
if (!np || !np->child) {
printk(KERN_WARNING "Can't find CPU(s) in device tree !\n");
break;
}
np = np->child;
/* Nap mode not supported on SMP */
if (np->sibling)
break;
/* Nap mode not supported if flush-on-lock property is present */
if (get_property(np, "flush-on-lock", NULL))
break;
powersave_nap = 1;
printk(KERN_INFO "Processor NAP mode on idle enabled.\n");
break;
}
/* On CPUs that support it (750FX), lowspeed by default during
* NAP mode
*/
powersave_lowspeed = 1;
#endif /* CONFIG_6xx */
#ifdef CONFIG_POWER4
powersave_nap = 1;
#endif
/* Check for "mobile" machine */
if (model && (strncmp(model, "PowerBook", 9) == 0
|| strncmp(model, "iBook", 5) == 0))
pmac_mb.board_flags |= PMAC_MB_MOBILE;
printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
return 0;
}
/* Initialize the Core99 UniNorth host bridge and memory controller
*/
static void __init
probe_uninorth(void)
{
unsigned long actrl;
/* Locate core99 Uni-N */
uninorth_node = of_find_node_by_name(NULL, "uni-n");
/* Locate G5 u3 */
if (uninorth_node == NULL) {
uninorth_node = of_find_node_by_name(NULL, "u3");
uninorth_u3 = 1;
}
if (uninorth_node && uninorth_node->n_addrs > 0) {
unsigned long address = uninorth_node->addrs[0].address;
uninorth_base = ioremap(address, 0x40000);
uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
if (uninorth_u3)
u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
} else
uninorth_node = NULL;
if (!uninorth_node)
return;
printk(KERN_INFO "Found %s memory controller & host bridge, revision: %d\n",
uninorth_u3 ? "U3" : "UniNorth", uninorth_rev);
printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
/* Set the arbitrer QAck delay according to what Apple does
*/
if (uninorth_rev < 0x11) {
actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK;
actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 :
UNI_N_ARB_CTRL_QACK_DELAY) << UNI_N_ARB_CTRL_QACK_DELAY_SHIFT;
UN_OUT(UNI_N_ARB_CTRL, actrl);
}
/* Some more magic as done by them in recent MacOS X on UniNorth
* revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI
* memory timeout
*/
if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || uninorth_rev == 0xc0)
UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff);
}
static void __init
probe_one_macio(const char* name, const char* compat, int type)
{
struct device_node* node;
int i;
volatile u32 __iomem * base;
u32* revp;
node = find_devices(name);
if (!node || !node->n_addrs)
return;
if (compat)
do {
if (device_is_compatible(node, compat))
break;
node = node->next;
} while (node);
if (!node)
return;
for(i=0; i<MAX_MACIO_CHIPS; i++) {
if (!macio_chips[i].of_node)
break;
if (macio_chips[i].of_node == node)
return;
}
if (i >= MAX_MACIO_CHIPS) {
printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name);
return;
}
base = ioremap(node->addrs[0].address, node->addrs[0].size);
if (!base) {
printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n");
return;
}
if (type == macio_keylargo) {
u32* did = (u32 *)get_property(node, "device-id", NULL);
if (*did == 0x00000025)
type = macio_pangea;
if (*did == 0x0000003e)
type = macio_intrepid;
}
macio_chips[i].of_node = node;
macio_chips[i].type = type;
macio_chips[i].base = base;
macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
macio_chips[i].name = macio_names[type];
revp = (u32 *)get_property(node, "revision-id", NULL);
if (revp)
macio_chips[i].rev = *revp;
printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
macio_names[type], macio_chips[i].rev, macio_chips[i].base);
}
static int __init
probe_macios(void)
{
/* Warning, ordering is important */
probe_one_macio("gc", NULL, macio_grand_central);
probe_one_macio("ohare", NULL, macio_ohare);
probe_one_macio("pci106b,7", NULL, macio_ohareII);
probe_one_macio("mac-io", "keylargo", macio_keylargo);
probe_one_macio("mac-io", "paddington", macio_paddington);
probe_one_macio("mac-io", "gatwick", macio_gatwick);
probe_one_macio("mac-io", "heathrow", macio_heathrow);
probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2);
/* Make sure the "main" macio chip appear first */
if (macio_chips[0].type == macio_gatwick
&& macio_chips[1].type == macio_heathrow) {
struct macio_chip temp = macio_chips[0];
macio_chips[0] = macio_chips[1];
macio_chips[1] = temp;
}
if (macio_chips[0].type == macio_ohareII
&& macio_chips[1].type == macio_ohare) {
struct macio_chip temp = macio_chips[0];
macio_chips[0] = macio_chips[1];
macio_chips[1] = temp;
}
macio_chips[0].lbus.index = 0;
macio_chips[1].lbus.index = 1;
return (macio_chips[0].of_node == NULL) ? -ENODEV : 0;
}
static void __init
initial_serial_shutdown(struct device_node* np)
{
int len;
struct slot_names_prop {
int count;
char name[1];
} *slots;
char *conn;
int port_type = PMAC_SCC_ASYNC;
int modem = 0;
slots = (struct slot_names_prop *)get_property(np, "slot-names", &len);
conn = get_property(np, "AAPL,connector", &len);
if (conn && (strcmp(conn, "infrared") == 0))
port_type = PMAC_SCC_IRDA;
else if (device_is_compatible(np, "cobalt"))
modem = 1;
else if (slots && slots->count > 0) {
if (strcmp(slots->name, "IrDA") == 0)
port_type = PMAC_SCC_IRDA;
else if (strcmp(slots->name, "Modem") == 0)
modem = 1;
}
if (modem)
pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0);
pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0);
}
static void __init
set_initial_features(void)
{
struct device_node* np;
/* That hack appears to be necessary for some StarMax motherboards
* but I'm not too sure it was audited for side-effects on other
* ohare based machines...
* Since I still have difficulties figuring the right way to
* differenciate them all and since that hack was there for a long
* time, I'll keep it around
*/
if (macio_chips[0].type == macio_ohare && !find_devices("via-pmu")) {
struct macio_chip* macio = &macio_chips[0];
MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES);
} else if (macio_chips[0].type == macio_ohare) {
struct macio_chip* macio = &macio_chips[0];
MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
} else if (macio_chips[1].type == macio_ohare) {
struct macio_chip* macio = &macio_chips[1];
MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
}
#ifdef CONFIG_POWER4
if (macio_chips[0].type == macio_keylargo2) {
#ifndef CONFIG_SMP
/* On SMP machines running UP, we have the second CPU eating
* bus cycles. We need to take it off the bus. This is done
* from pmac_smp for SMP kernels running on one CPU
*/
np = of_find_node_by_type(NULL, "cpu");
if (np != NULL)
np = of_find_node_by_type(np, "cpu");
if (np != NULL) {
g5_phy_disable_cpu1();
of_node_put(np);
}
#endif /* CONFIG_SMP */
/* Enable GMAC for now for PCI probing. It will be disabled
* later on after PCI probe
*/
np = of_find_node_by_name(NULL, "ethernet");
while(np) {
if (device_is_compatible(np, "K2-GMAC"))
g5_gmac_enable(np, 0, 1);
np = of_find_node_by_name(np, "ethernet");
}
/* Enable FW before PCI probe. Will be disabled later on
* Note: We should have a batter way to check that we are
* dealing with uninorth internal cell and not a PCI cell
* on the external PCI. The code below works though.
*/
np = of_find_node_by_name(NULL, "firewire");
while(np) {
if (device_is_compatible(np, "pci106b,5811")) {
macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
g5_fw_enable(np, 0, 1);
}
np = of_find_node_by_name(np, "firewire");
}
}
#else /* CONFIG_POWER4 */
if (macio_chips[0].type == macio_keylargo ||
macio_chips[0].type == macio_pangea ||
macio_chips[0].type == macio_intrepid) {
/* Enable GMAC for now for PCI probing. It will be disabled
* later on after PCI probe
*/
np = of_find_node_by_name(NULL, "ethernet");
while(np) {
if (np->parent
&& device_is_compatible(np->parent, "uni-north")
&& device_is_compatible(np, "gmac"))
core99_gmac_enable(np, 0, 1);
np = of_find_node_by_name(np, "ethernet");
}
/* Enable FW before PCI probe. Will be disabled later on
* Note: We should have a batter way to check that we are
* dealing with uninorth internal cell and not a PCI cell
* on the external PCI. The code below works though.
*/
np = of_find_node_by_name(NULL, "firewire");
while(np) {
if (np->parent
&& device_is_compatible(np->parent, "uni-north")
&& (device_is_compatible(np, "pci106b,18") ||
device_is_compatible(np, "pci106b,30") ||
device_is_compatible(np, "pci11c1,5811"))) {
macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
core99_firewire_enable(np, 0, 1);
}
np = of_find_node_by_name(np, "firewire");
}
/* Enable ATA-100 before PCI probe. */
np = of_find_node_by_name(NULL, "ata-6");
while(np) {
if (np->parent
&& device_is_compatible(np->parent, "uni-north")
&& device_is_compatible(np, "kauai-ata")) {
core99_ata100_enable(np, 1);
}
np = of_find_node_by_name(np, "ata-6");
}
/* Switch airport off */
np = find_devices("radio");
while(np) {
if (np && np->parent == macio_chips[0].of_node) {
macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON;
core99_airport_enable(np, 0, 0);
}
np = np->next;
}
}
/* On all machines that support sound PM, switch sound off */
if (macio_chips[0].of_node)
pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE,
macio_chips[0].of_node, 0, 0);
/* While on some desktop G3s, we turn it back on */
if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow
&& (pmac_mb.model_id == PMAC_TYPE_GOSSAMER ||
pmac_mb.model_id == PMAC_TYPE_SILK)) {
struct macio_chip* macio = &macio_chips[0];
MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
}
/* Hack for bumping clock speed on the new PowerBooks and the
* iBook G4. This implements the "platform-do-clockspreading" OF
* property. For safety, we also check the product ID in the
* device-tree to make reasonably sure we won't set wrong values
* in the clock chip.
*
* Of course, ultimately, we have to implement a real parser for
* the platform-do-* stuff...
*/
while (machine_is_compatible("PowerBook5,2") ||
machine_is_compatible("PowerBook5,3") ||
machine_is_compatible("PowerBook6,2") ||
machine_is_compatible("PowerBook6,3")) {
struct device_node *ui2c = of_find_node_by_type(NULL, "i2c");
struct device_node *dt = of_find_node_by_name(NULL, "device-tree");
u8 buffer[9];
u32 *productID;
int i, rc, changed = 0;
if (dt == NULL)
break;
productID = (u32 *)get_property(dt, "pid#", NULL);
if (productID == NULL)
break;
while(ui2c) {
struct device_node *p = of_get_parent(ui2c);
if (p && !strcmp(p->name, "uni-n"))
break;
ui2c = of_find_node_by_type(ui2c, "i2c");
}
if (ui2c == NULL)
break;
DBG("Trying to bump clock speed for PID: %08x...\n", *productID);
rc = pmac_low_i2c_open(ui2c, 1);
if (rc != 0)
break;
pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined);
rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9);
DBG("read result: %d,", rc);
if (rc != 0) {
pmac_low_i2c_close(ui2c);
break;
}
for (i=0; i<9; i++)
DBG(" %02x", buffer[i]);
DBG("\n");
switch(*productID) {
case 0x1182: /* AlBook 12" rev 2 */
case 0x1183: /* iBook G4 12" */
buffer[0] = (buffer[0] & 0x8f) | 0x70;
buffer[2] = (buffer[2] & 0x7f) | 0x00;
buffer[5] = (buffer[5] & 0x80) | 0x31;
buffer[6] = (buffer[6] & 0x40) | 0xb0;
buffer[7] = (buffer[7] & 0x00) | 0xc0;
buffer[8] = (buffer[8] & 0x00) | 0x30;
changed = 1;
break;
case 0x3142: /* AlBook 15" (ATI M10) */
case 0x3143: /* AlBook 17" (ATI M10) */
buffer[0] = (buffer[0] & 0xaf) | 0x50;
buffer[2] = (buffer[2] & 0x7f) | 0x00;
buffer[5] = (buffer[5] & 0x80) | 0x31;
buffer[6] = (buffer[6] & 0x40) | 0xb0;
buffer[7] = (buffer[7] & 0x00) | 0xd0;
buffer[8] = (buffer[8] & 0x00) | 0x30;
changed = 1;
break;
default:
DBG("i2c-hwclock: Machine model not handled\n");
break;
}
if (!changed) {
pmac_low_i2c_close(ui2c);
break;
}
pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_stdsub);
rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_write, 0x80, buffer, 9);
DBG("write result: %d,", rc);
pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined);
rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9);
DBG("read result: %d,", rc);
if (rc != 0) {
pmac_low_i2c_close(ui2c);
break;
}
for (i=0; i<9; i++)
DBG(" %02x", buffer[i]);
pmac_low_i2c_close(ui2c);
break;
}
#endif /* CONFIG_POWER4 */
/* On all machines, switch modem & serial ports off */
np = find_devices("ch-a");
while(np) {
initial_serial_shutdown(np);
np = np->next;
}
np = find_devices("ch-b");
while(np) {
initial_serial_shutdown(np);
np = np->next;
}
}
void __init
pmac_feature_init(void)
{
/* Detect the UniNorth memory controller */
probe_uninorth();
/* Probe mac-io controllers */
if (probe_macios()) {
printk(KERN_WARNING "No mac-io chip found\n");
return;
}
/* Setup low-level i2c stuffs */
pmac_init_low_i2c();
/* Probe machine type */
if (probe_motherboard())
printk(KERN_WARNING "Unknown PowerMac !\n");
/* Set some initial features (turn off some chips that will
* be later turned on)
*/
set_initial_features();
}
int __init
pmac_feature_late_init(void)
{
struct device_node* np;
/* Request some resources late */
if (uninorth_node)
request_OF_resource(uninorth_node, 0, NULL);
np = find_devices("hammerhead");
if (np)
request_OF_resource(np, 0, NULL);
np = find_devices("interrupt-controller");
if (np)
request_OF_resource(np, 0, NULL);
return 0;
}
device_initcall(pmac_feature_late_init);
#ifdef CONFIG_POWER4
static void dump_HT_speeds(char *name, u32 cfg, u32 frq)
{
int freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 };
int bits[8] = { 8,16,0,32,2,4,0,0 };
int freq = (frq >> 8) & 0xf;
if (freqs[freq] == 0)
printk("%s: Unknown HT link frequency %x\n", name, freq);
else
printk("%s: %d MHz on main link, (%d in / %d out) bits width\n",
name, freqs[freq],
bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]);
}
void __init pmac_check_ht_link(void)
{
u32 ufreq, freq, ucfg, cfg;
struct device_node *pcix_node;
u8 px_bus, px_devfn;
struct pci_controller *px_hose;
(void)in_be32(u3_ht + U3_HT_LINK_COMMAND);
ucfg = cfg = in_be32(u3_ht + U3_HT_LINK_CONFIG);
ufreq = freq = in_be32(u3_ht + U3_HT_LINK_FREQ);
dump_HT_speeds("U3 HyperTransport", cfg, freq);
pcix_node = of_find_compatible_node(NULL, "pci", "pci-x");
if (pcix_node == NULL) {
printk("No PCI-X bridge found\n");
return;
}
if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) {
printk("PCI-X bridge found but not matched to pci\n");
return;
}
px_hose = pci_find_hose_for_OF_device(pcix_node);
if (px_hose == NULL) {
printk("PCI-X bridge found but not matched to host\n");
return;
}
early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg);
early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq);
dump_HT_speeds("PCI-X HT Uplink", cfg, freq);
early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg);
early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq);
dump_HT_speeds("PCI-X HT Downlink", cfg, freq);
}
#endif /* CONFIG_POWER4 */
/*
* Early video resume hook
*/
static void (*pmac_early_vresume_proc)(void *data) __pmacdata;
static void *pmac_early_vresume_data __pmacdata;
void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
{
if (_machine != _MACH_Pmac)
return;
preempt_disable();
pmac_early_vresume_proc = proc;
pmac_early_vresume_data = data;
preempt_enable();
}
EXPORT_SYMBOL(pmac_set_early_video_resume);
void __pmac pmac_call_early_video_resume(void)
{
if (pmac_early_vresume_proc)
pmac_early_vresume_proc(pmac_early_vresume_data);
}
/*
* AGP related suspend/resume code
*/
static struct pci_dev *pmac_agp_bridge __pmacdata;
static int (*pmac_agp_suspend)(struct pci_dev *bridge) __pmacdata;
static int (*pmac_agp_resume)(struct pci_dev *bridge) __pmacdata;
void __pmac pmac_register_agp_pm(struct pci_dev *bridge,
int (*suspend)(struct pci_dev *bridge),
int (*resume)(struct pci_dev *bridge))
{
if (suspend || resume) {
pmac_agp_bridge = bridge;
pmac_agp_suspend = suspend;
pmac_agp_resume = resume;
return;
}
if (bridge != pmac_agp_bridge)
return;
pmac_agp_suspend = pmac_agp_resume = NULL;
return;
}
EXPORT_SYMBOL(pmac_register_agp_pm);
void __pmac pmac_suspend_agp_for_card(struct pci_dev *dev)
{
if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL)
return;
if (pmac_agp_bridge->bus != dev->bus)
return;
pmac_agp_suspend(pmac_agp_bridge);
}
EXPORT_SYMBOL(pmac_suspend_agp_for_card);
void __pmac pmac_resume_agp_for_card(struct pci_dev *dev)
{
if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL)
return;
if (pmac_agp_bridge->bus != dev->bus)
return;
pmac_agp_resume(pmac_agp_bridge);
}
EXPORT_SYMBOL(pmac_resume_agp_for_card);
Reference in New Issue View Git Blame Copy Permalink