kernel-aes67/fs/sync.c
OGAWA Hirofumi 111ebb6e6f [PATCH] writeback: fix range handling
When a writeback_control's `start' and `end' fields are used to
indicate a one-byte-range starting at file offset zero, the required
values of .start=0,.end=0 mean that the ->writepages() implementation
has no way of telling that it is being asked to perform a range
request.  Because we're currently overloading (start == 0 && end == 0)
to mean "this is not a write-a-range request".

To make all this sane, the patch changes range of writeback_control.

So caller does: If it is calling ->writepages() to write pages, it
sets range (range_start/end or range_cyclic) always.

And if range_cyclic is true, ->writepages() thinks the range is
cyclic, otherwise it just uses range_start and range_end.

This patch does,

    - Add LLONG_MAX, LLONG_MIN, ULLONG_MAX to include/linux/kernel.h
      -1 is usually ok for range_end (type is long long). But, if someone did,

		range_end += val;		range_end is "val - 1"
		u64val = range_end >> bits;	u64val is "~(0ULL)"

      or something, they are wrong. So, this adds LLONG_MAX to avoid nasty
      things, and uses LLONG_MAX for range_end.

    - All callers of ->writepages() sets range_start/end or range_cyclic.

    - Fix updates of ->writeback_index. It seems already bit strange.
      If it starts at 0 and ended by check of nr_to_write, this last
      index may reduce chance to scan end of file.  So, this updates
      ->writeback_index only if range_cyclic is true or whole-file is
      scanned.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Steven French <sfrench@us.ibm.com>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:49 -07:00

165 lines
4.4 KiB
C

/*
* High-level sync()-related operations
*/
#include <linux/kernel.h>
#include <linux/file.h>
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/writeback.h>
#include <linux/syscalls.h>
#include <linux/linkage.h>
#include <linux/pagemap.h>
#define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
SYNC_FILE_RANGE_WAIT_AFTER)
/*
* sys_sync_file_range() permits finely controlled syncing over a segment of
* a file in the range offset .. (offset+nbytes-1) inclusive. If nbytes is
* zero then sys_sync_file_range() will operate from offset out to EOF.
*
* The flag bits are:
*
* SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
* before performing the write.
*
* SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
* range which are not presently under writeback.
*
* SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
* after performing the write.
*
* Useful combinations of the flag bits are:
*
* SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
* in the range which were dirty on entry to sys_sync_file_range() are placed
* under writeout. This is a start-write-for-data-integrity operation.
*
* SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
* are not presently under writeout. This is an asynchronous flush-to-disk
* operation. Not suitable for data integrity operations.
*
* SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
* completion of writeout of all pages in the range. This will be used after an
* earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
* for that operation to complete and to return the result.
*
* SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER:
* a traditional sync() operation. This is a write-for-data-integrity operation
* which will ensure that all pages in the range which were dirty on entry to
* sys_sync_file_range() are committed to disk.
*
*
* SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
* I/O errors or ENOSPC conditions and will return those to the caller, after
* clearing the EIO and ENOSPC flags in the address_space.
*
* It should be noted that none of these operations write out the file's
* metadata. So unless the application is strictly performing overwrites of
* already-instantiated disk blocks, there are no guarantees here that the data
* will be available after a crash.
*/
asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
unsigned int flags)
{
int ret;
struct file *file;
loff_t endbyte; /* inclusive */
int fput_needed;
umode_t i_mode;
ret = -EINVAL;
if (flags & ~VALID_FLAGS)
goto out;
endbyte = offset + nbytes;
if ((s64)offset < 0)
goto out;
if ((s64)endbyte < 0)
goto out;
if (endbyte < offset)
goto out;
if (sizeof(pgoff_t) == 4) {
if (offset >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
/*
* The range starts outside a 32 bit machine's
* pagecache addressing capabilities. Let it "succeed"
*/
ret = 0;
goto out;
}
if (endbyte >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
/*
* Out to EOF
*/
nbytes = 0;
}
}
if (nbytes == 0)
endbyte = LLONG_MAX;
else
endbyte--; /* inclusive */
ret = -EBADF;
file = fget_light(fd, &fput_needed);
if (!file)
goto out;
i_mode = file->f_dentry->d_inode->i_mode;
ret = -ESPIPE;
if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) &&
!S_ISLNK(i_mode))
goto out_put;
ret = do_sync_file_range(file, offset, endbyte, flags);
out_put:
fput_light(file, fput_needed);
out:
return ret;
}
/*
* `endbyte' is inclusive
*/
int do_sync_file_range(struct file *file, loff_t offset, loff_t endbyte,
unsigned int flags)
{
int ret;
struct address_space *mapping;
mapping = file->f_mapping;
if (!mapping) {
ret = -EINVAL;
goto out;
}
ret = 0;
if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) {
ret = wait_on_page_writeback_range(mapping,
offset >> PAGE_CACHE_SHIFT,
endbyte >> PAGE_CACHE_SHIFT);
if (ret < 0)
goto out;
}
if (flags & SYNC_FILE_RANGE_WRITE) {
ret = __filemap_fdatawrite_range(mapping, offset, endbyte,
WB_SYNC_NONE);
if (ret < 0)
goto out;
}
if (flags & SYNC_FILE_RANGE_WAIT_AFTER) {
ret = wait_on_page_writeback_range(mapping,
offset >> PAGE_CACHE_SHIFT,
endbyte >> PAGE_CACHE_SHIFT);
}
out:
return ret;
}
EXPORT_SYMBOL_GPL(do_sync_file_range);