1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
154 lines
3.2 KiB
Plaintext
154 lines
3.2 KiB
Plaintext
Documentation for CMI 8330 (SoundPRO)
|
|
-------------------------------------
|
|
Alessandro Zummo <azummo@ita.flashnet.it>
|
|
|
|
( Be sure to read Documentation/sound/oss/SoundPro too )
|
|
|
|
|
|
This adapter is now directly supported by the sb driver.
|
|
|
|
The only thing you have to do is to compile the kernel sound
|
|
support as a module and to enable kernel ISAPnP support,
|
|
as shown below.
|
|
|
|
|
|
CONFIG_SOUND=m
|
|
CONFIG_SOUND_SB=m
|
|
|
|
CONFIG_PNP=y
|
|
CONFIG_ISAPNP=y
|
|
|
|
|
|
and optionally:
|
|
|
|
|
|
CONFIG_SOUND_MPU401=m
|
|
|
|
for MPU401 support.
|
|
|
|
|
|
(I suggest you to use "make menuconfig" or "make xconfig"
|
|
for a more comfortable configuration editing)
|
|
|
|
|
|
|
|
Then you can do
|
|
|
|
modprobe sb
|
|
|
|
and everything will be (hopefully) configured.
|
|
|
|
You should get something similar in syslog:
|
|
|
|
sb: CMI8330 detected.
|
|
sb: CMI8330 sb base located at 0x220
|
|
sb: CMI8330 mpu base located at 0x330
|
|
sb: CMI8330 mail reports to Alessandro Zummo <azummo@ita.flashnet.it>
|
|
sb: ISAPnP reports CMI 8330 SoundPRO at i/o 0x220, irq 7, dma 1,5
|
|
|
|
|
|
|
|
|
|
The old documentation file follows for reference
|
|
purposes.
|
|
|
|
|
|
How to enable CMI 8330 (SOUNDPRO) soundchip on Linux
|
|
------------------------------------------
|
|
Stefan Laudat <Stefan.Laudat@asit.ro>
|
|
|
|
[Note: The CMI 8338 is unrelated and is supported by cmpci.o]
|
|
|
|
|
|
In order to use CMI8330 under Linux you just have to use a proper isapnp.conf, a good isapnp and a little bit of patience. I use isapnp 1.17, but
|
|
you may get a better one I guess at http://www.roestock.demon.co.uk/isapnptools/.
|
|
|
|
Of course you will have to compile kernel sound support as module, as shown below:
|
|
|
|
CONFIG_SOUND=m
|
|
CONFIG_SOUND_OSS=m
|
|
CONFIG_SOUND_SB=m
|
|
CONFIG_SOUND_ADLIB=m
|
|
CONFIG_SOUND_MPU401=m
|
|
# Mikro$chaft sound system (kinda useful here ;))
|
|
CONFIG_SOUND_MSS=m
|
|
|
|
The /etc/isapnp.conf file will be:
|
|
|
|
<snip below>
|
|
|
|
|
|
(READPORT 0x0203)
|
|
(ISOLATE PRESERVE)
|
|
(IDENTIFY *)
|
|
(VERBOSITY 2)
|
|
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
|
|
(VERIFYLD N)
|
|
|
|
|
|
# WSS
|
|
|
|
(CONFIGURE CMI0001/16777472 (LD 0
|
|
(IO 0 (SIZE 8) (BASE 0x0530))
|
|
(IO 1 (SIZE 8) (BASE 0x0388))
|
|
(INT 0 (IRQ 7 (MODE +E)))
|
|
(DMA 0 (CHANNEL 0))
|
|
(NAME "CMI0001/16777472[0]{CMI8330/C3D Audio Adapter}")
|
|
(ACT Y)
|
|
))
|
|
|
|
# MPU
|
|
|
|
(CONFIGURE CMI0001/16777472 (LD 1
|
|
(IO 0 (SIZE 2) (BASE 0x0330))
|
|
(INT 0 (IRQ 11 (MODE +E)))
|
|
(NAME "CMI0001/16777472[1]{CMI8330/C3D Audio Adapter}")
|
|
(ACT Y)
|
|
))
|
|
|
|
# Joystick
|
|
|
|
(CONFIGURE CMI0001/16777472 (LD 2
|
|
(IO 0 (SIZE 8) (BASE 0x0200))
|
|
(NAME "CMI0001/16777472[2]{CMI8330/C3D Audio Adapter}")
|
|
(ACT Y)
|
|
))
|
|
|
|
# SoundBlaster
|
|
|
|
(CONFIGURE CMI0001/16777472 (LD 3
|
|
(IO 0 (SIZE 16) (BASE 0x0220))
|
|
(INT 0 (IRQ 5 (MODE +E)))
|
|
(DMA 0 (CHANNEL 1))
|
|
(DMA 1 (CHANNEL 5))
|
|
(NAME "CMI0001/16777472[3]{CMI8330/C3D Audio Adapter}")
|
|
(ACT Y)
|
|
))
|
|
|
|
|
|
(WAITFORKEY)
|
|
|
|
<end of snip>
|
|
|
|
The module sequence is trivial:
|
|
|
|
/sbin/insmod soundcore
|
|
/sbin/insmod sound
|
|
/sbin/insmod uart401
|
|
# insert this first
|
|
/sbin/insmod ad1848 io=0x530 irq=7 dma=0 soundpro=1
|
|
# The sb module is an alternative to the ad1848 (Microsoft Sound System)
|
|
# Anyhow, this is full duplex and has MIDI
|
|
/sbin/insmod sb io=0x220 dma=1 dma16=5 irq=5 mpu_io=0x330
|
|
|
|
|
|
|
|
Alma Chao <elysian@ethereal.torsion.org> suggests the following /etc/modprobe.conf:
|
|
|
|
alias sound ad1848
|
|
alias synth0 opl3
|
|
options ad1848 io=0x530 irq=7 dma=0 soundpro=1
|
|
options opl3 io=0x388
|
|
|
|
|