Preston_PLB/kernel-aes67
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9420dc65ff
kernel-aes67/arch/xtensa/kernel/align.S
Chris Zankel 173d668138 [PATCH] xtensa: remove extra header files 
The Xtensa port contained many header files that were never needed.  This
rather lengthy patch removes all those files.  Unfortunately, there were
many dependencies that needed to be updated, so this patch touches quite a
few source files.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:55:39 -08:00

456 lines
11 KiB
ArmAsm
Raw Blame History

/*
* arch/xtensa/kernel/align.S
*
* Handle unalignment exceptions in kernel space.
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file "COPYING" in the main directory of
* this archive for more details.
*
* Copyright (C) 2001 - 2005 Tensilica, Inc.
*
* Rewritten by Chris Zankel <chris@zankel.net>
*
* Based on work from Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
* and Marc Gauthier <marc@tensilica.com, marc@alimni.uwaterloo.ca>
*/
#include <linux/linkage.h>
#include <asm/current.h>
#include <asm/asm-offsets.h>
#include <asm/processor.h>
#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION
/* First-level exception handler for unaligned exceptions.
*
* Note: This handler works only for kernel exceptions. Unaligned user
* access should get a seg fault.
*/
/* Big and little endian 16-bit values are located in
* different halves of a register. HWORD_START helps to
* abstract the notion of extracting a 16-bit value from a
* register.
* We also have to define new shifting instructions because
* lsb and msb are on 'opposite' ends in a register for
* different endian machines.
*
* Assume a memory region in ascending address:
* 0 1 2 3|4 5 6 7
*
* When loading one word into a register, the content of that register is:
* LE 3 2 1 0, 7 6 5 4
* BE 0 1 2 3, 4 5 6 7
*
* Masking the bits of the higher/lower address means:
* LE X X 0 0, 0 0 X X
* BE 0 0 X X, X X 0 0
*
* Shifting to higher/lower addresses, means:
* LE shift left / shift right
* BE shift right / shift left
*
* Extracting 16 bits from a 32 bit reg. value to higher/lower address means:
* LE mask 0 0 X X / shift left
* BE shift left / mask 0 0 X X
*/
#define UNALIGNED_USER_EXCEPTION
#if XCHAL_HAVE_BE
#define HWORD_START 16
#define INSN_OP0 28
#define INSN_T 24
#define INSN_OP1 16
.macro __src_b r, w0, w1; src \r, \w0, \w1; .endm
.macro __ssa8 r; ssa8b \r; .endm
.macro __ssa8r r; ssa8l \r; .endm
.macro __sh r, s; srl \r, \s; .endm
.macro __sl r, s; sll \r, \s; .endm
.macro __exth r, s; extui \r, \s, 0, 16; .endm
.macro __extl r, s; slli \r, \s, 16; .endm
#else
#define HWORD_START 0
#define INSN_OP0 0
#define INSN_T 4
#define INSN_OP1 12
.macro __src_b r, w0, w1; src \r, \w1, \w0; .endm
.macro __ssa8 r; ssa8l \r; .endm
.macro __ssa8r r; ssa8b \r; .endm
.macro __sh r, s; sll \r, \s; .endm
.macro __sl r, s; srl \r, \s; .endm
.macro __exth r, s; slli \r, \s, 16; .endm
.macro __extl r, s; extui \r, \s, 0, 16; .endm
#endif
/*
* xxxx xxxx = imm8 field
* yyyy = imm4 field
* ssss = s field
* tttt = t field
*
* 16 0
* -------------------
* L32I.N yyyy ssss tttt 1000
* S32I.N yyyy ssss tttt 1001
*
* 23 0
* -----------------------------
* res 0000 0010
* L16UI xxxx xxxx 0001 ssss tttt 0010
* L32I xxxx xxxx 0010 ssss tttt 0010
* XXX 0011 ssss tttt 0010
* XXX 0100 ssss tttt 0010
* S16I xxxx xxxx 0101 ssss tttt 0010
* S32I xxxx xxxx 0110 ssss tttt 0010
* XXX 0111 ssss tttt 0010
* XXX 1000 ssss tttt 0010
* L16SI xxxx xxxx 1001 ssss tttt 0010
* XXX 1010 0010
* **L32AI xxxx xxxx 1011 ssss tttt 0010 unsupported
* XXX 1100 0010
* XXX 1101 0010
* XXX 1110 0010
* **S32RI xxxx xxxx 1111 ssss tttt 0010 unsupported
* -----------------------------
* ^ ^ ^
* sub-opcode (NIBBLE_R) -+ | |
* t field (NIBBLE_T) -----------+ |
* major opcode (NIBBLE_OP0) --------------+
*/
#define OP0_L32I_N 0x8 /* load immediate narrow */
#define OP0_S32I_N 0x9 /* store immediate narrow */
#define OP1_SI_MASK 0x4 /* OP1 bit set for stores */
#define OP1_SI_BIT 2 /* OP1 bit number for stores */
#define OP1_L32I 0x2
#define OP1_L16UI 0x1
#define OP1_L16SI 0x9
#define OP1_L32AI 0xb
#define OP1_S32I 0x6
#define OP1_S16I 0x5
#define OP1_S32RI 0xf
/*
* Entry condition:
*
* a0: trashed, original value saved on stack (PT_AREG0)
* a1: a1
* a2: new stack pointer, original in DEPC
* a3: dispatch table
* depc: a2, original value saved on stack (PT_DEPC)
* excsave_1: a3
*
* PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
* < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
*/
ENTRY(fast_unaligned)
/* Note: We don't expect the address to be aligned on a word
* boundary. After all, the processor generated that exception
* and it would be a hardware fault.
*/
/* Save some working register */
s32i a4, a2, PT_AREG4
s32i a5, a2, PT_AREG5
s32i a6, a2, PT_AREG6
s32i a7, a2, PT_AREG7
s32i a8, a2, PT_AREG8
rsr a0, DEPC
xsr a3, EXCSAVE_1
s32i a0, a2, PT_AREG2
s32i a3, a2, PT_AREG3
/* Keep value of SAR in a0 */
rsr a0, SAR
rsr a8, EXCVADDR # load unaligned memory address
/* Now, identify one of the following load/store instructions.
*
* The only possible danger of a double exception on the
* following l32i instructions is kernel code in vmalloc
* memory. The processor was just executing at the EPC_1
* address, and indeed, already fetched the instruction. That
* guarantees a TLB mapping, which hasn't been replaced by
* this unaligned exception handler that uses only static TLB
* mappings. However, high-level interrupt handlers might
* modify TLB entries, so for the generic case, we register a
* TABLE_FIXUP handler here, too.
*/
/* a3...a6 saved on stack, a2 = SP */
/* Extract the instruction that caused the unaligned access. */
rsr a7, EPC_1 # load exception address
movi a3, ~3
and a3, a3, a7 # mask lower bits
l32i a4, a3, 0 # load 2 words
l32i a5, a3, 4
__ssa8 a7
__src_b a4, a4, a5 # a4 has the instruction
/* Analyze the instruction (load or store?). */
extui a5, a4, INSN_OP0, 4 # get insn.op0 nibble
#if XCHAL_HAVE_DENSITY
_beqi a5, OP0_L32I_N, .Lload # L32I.N, jump
addi a6, a5, -OP0_S32I_N
_beqz a6, .Lstore # S32I.N, do a store
#endif
/* 'store indicator bit' not set, jump */
_bbci.l a4, OP1_SI_BIT + INSN_OP1, .Lload
/* Store: Jump to table entry to get the value in the source register.*/
.Lstore:movi a5, .Lstore_table # table
extui a6, a4, INSN_T, 4 # get source register
addx8 a5, a6, a5
jx a5 # jump into table
/* Invalid instruction, CRITICAL! */
.Linvalid_instruction_load:
j .Linvalid_instruction
/* Load: Load memory address. */
.Lload: movi a3, ~3
and a3, a3, a8 # align memory address
__ssa8 a8
#ifdef UNALIGNED_USER_EXCEPTION
addi a3, a3, 8
l32e a5, a3, -8
l32e a6, a3, -4
#else
l32i a5, a3, 0
l32i a6, a3, 4
#endif
__src_b a3, a5, a6 # a3 has the data word
#if XCHAL_HAVE_DENSITY
addi a7, a7, 2 # increment PC (assume 16-bit insn)
extui a5, a4, INSN_OP0, 4
_beqi a5, OP0_L32I_N, 1f # l32i.n: jump
addi a7, a7, 1
#else
addi a7, a7, 3
#endif
extui a5, a4, INSN_OP1, 4
_beqi a5, OP1_L32I, 1f # l32i: jump
extui a3, a3, 0, 16 # extract lower 16 bits
_beqi a5, OP1_L16UI, 1f
addi a5, a5, -OP1_L16SI
_bnez a5, .Linvalid_instruction_load
/* sign extend value */
slli a3, a3, 16
srai a3, a3, 16
/* Set target register. */
1:
#if XCHAL_HAVE_LOOPS
rsr a5, LEND # check if we reached LEND
bne a7, a5, 1f
rsr a5, LCOUNT # and LCOUNT != 0
beqz a5, 1f
addi a5, a5, -1 # decrement LCOUNT and set
rsr a7, LBEG # set PC to LBEGIN
wsr a5, LCOUNT
#endif
1: wsr a7, EPC_1 # skip load instruction
extui a4, a4, INSN_T, 4 # extract target register
movi a5, .Lload_table
addx8 a4, a4, a5
jx a4 # jump to entry for target register
.align 8
.Lload_table:
s32i a3, a2, PT_AREG0; _j .Lexit; .align 8
mov a1, a3; _j .Lexit; .align 8 # fishy??
s32i a3, a2, PT_AREG2; _j .Lexit; .align 8
s32i a3, a2, PT_AREG3; _j .Lexit; .align 8
s32i a3, a2, PT_AREG4; _j .Lexit; .align 8
s32i a3, a2, PT_AREG5; _j .Lexit; .align 8
s32i a3, a2, PT_AREG6; _j .Lexit; .align 8
s32i a3, a2, PT_AREG7; _j .Lexit; .align 8
s32i a3, a2, PT_AREG8; _j .Lexit; .align 8
mov a9, a3 ; _j .Lexit; .align 8
mov a10, a3 ; _j .Lexit; .align 8
mov a11, a3 ; _j .Lexit; .align 8
mov a12, a3 ; _j .Lexit; .align 8
mov a13, a3 ; _j .Lexit; .align 8
mov a14, a3 ; _j .Lexit; .align 8
mov a15, a3 ; _j .Lexit; .align 8
.Lstore_table:
l32i a3, a2, PT_AREG0; _j 1f; .align 8
mov a3, a1; _j 1f; .align 8 # fishy??
l32i a3, a2, PT_AREG2; _j 1f; .align 8
l32i a3, a2, PT_AREG3; _j 1f; .align 8
l32i a3, a2, PT_AREG4; _j 1f; .align 8
l32i a3, a2, PT_AREG5; _j 1f; .align 8
l32i a3, a2, PT_AREG6; _j 1f; .align 8
l32i a3, a2, PT_AREG7; _j 1f; .align 8
l32i a3, a2, PT_AREG8; _j 1f; .align 8
mov a3, a9 ; _j 1f; .align 8
mov a3, a10 ; _j 1f; .align 8
mov a3, a11 ; _j 1f; .align 8
mov a3, a12 ; _j 1f; .align 8
mov a3, a13 ; _j 1f; .align 8
mov a3, a14 ; _j 1f; .align 8
mov a3, a15 ; _j 1f; .align 8
1: # a7: instruction pointer, a4: instruction, a3: value
movi a6, 0 # mask: ffffffff:00000000
#if XCHAL_HAVE_DENSITY
addi a7, a7, 2 # incr. PC,assume 16-bit instruction
extui a5, a4, INSN_OP0, 4 # extract OP0
addi a5, a5, -OP0_S32I_N
_beqz a5, 1f # s32i.n: jump
addi a7, a7, 1 # increment PC, 32-bit instruction
#else
addi a7, a7, 3 # increment PC, 32-bit instruction
#endif
extui a5, a4, INSN_OP1, 4 # extract OP1
_beqi a5, OP1_S32I, 1f # jump if 32 bit store
_bnei a5, OP1_S16I, .Linvalid_instruction_store
movi a5, -1
__extl a3, a3 # get 16-bit value
__exth a6, a5 # get 16-bit mask ffffffff:ffff0000
/* Get memory address */
1:
#if XCHAL_HAVE_LOOPS
rsr a4, LEND # check if we reached LEND
bne a7, a4, 1f
rsr a4, LCOUNT # and LCOUNT != 0
beqz a4, 1f
addi a4, a4, -1 # decrement LCOUNT and set
rsr a7, LBEG # set PC to LBEGIN
wsr a4, LCOUNT
#endif
1: wsr a7, EPC_1 # skip store instruction
movi a4, ~3
and a4, a4, a8 # align memory address
/* Insert value into memory */
movi a5, -1 # mask: ffffffff:XXXX0000
#ifdef UNALIGNED_USER_EXCEPTION
addi a4, a4, 8
#endif
__ssa8r a8
__src_b a7, a5, a6 # lo-mask F..F0..0 (BE) 0..0F..F (LE)
__src_b a6, a6, a5 # hi-mask 0..0F..F (BE) F..F0..0 (LE)
#ifdef UNALIGNED_USER_EXCEPTION
l32e a5, a4, -8
#else
l32i a5, a4, 0 # load lower address word
#endif
and a5, a5, a7 # mask
__sh a7, a3 # shift value
or a5, a5, a7 # or with original value
#ifdef UNALIGNED_USER_EXCEPTION
s32e a5, a4, -8
l32e a7, a4, -4
#else
s32i a5, a4, 0 # store
l32i a7, a4, 4 # same for upper address word
#endif
__sl a5, a3
and a6, a7, a6
or a6, a6, a5
#ifdef UNALIGNED_USER_EXCEPTION
s32e a6, a4, -4
#else
s32i a6, a4, 4
#endif
/* Done. restore stack and return */
.Lexit:
movi a4, 0
rsr a3, EXCSAVE_1
s32i a4, a3, EXC_TABLE_FIXUP
/* Restore working register */
l32i a8, a2, PT_AREG8
l32i a7, a2, PT_AREG7
l32i a6, a2, PT_AREG6
l32i a5, a2, PT_AREG5
l32i a4, a2, PT_AREG4
l32i a3, a2, PT_AREG3
/* restore SAR and return */
wsr a0, SAR
l32i a0, a2, PT_AREG0
l32i a2, a2, PT_AREG2
rfe
/* We cannot handle this exception. */
.extern _kernel_exception
.Linvalid_instruction_store:
.Linvalid_instruction:
/* Restore a4...a8 and SAR, set SP, and jump to default exception. */
l32i a8, a2, PT_AREG8
l32i a7, a2, PT_AREG7
l32i a6, a2, PT_AREG6
l32i a5, a2, PT_AREG5
l32i a4, a2, PT_AREG4
wsr a0, SAR
mov a1, a2
rsr a0, PS
bbsi.l a2, PS_UM_BIT, 1f # jump if user mode
movi a0, _kernel_exception
jx a0
1: movi a0, _user_exception
jx a0
#endif /* XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION */
Reference in New Issue View Git Blame Copy Permalink