21c614a789
The offsets of the registers are in a different place, and some parts cannot handle a full set of modem control signals. Signed-off-by: Pantelis Antoniou <pantelis@embeddedalley.ocm> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
103 lines
2.6 KiB
C
103 lines
2.6 KiB
C
/*
|
|
* Serial Device Initialisation for Au1x00
|
|
*
|
|
* (C) Copyright Embedded Alley Solutions, Inc 2005
|
|
* Author: Pantelis Antoniou <pantelis@embeddedalley.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/module.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/serial_8250.h>
|
|
|
|
#include <asm/mach-au1x00/au1000.h>
|
|
|
|
#include "8250.h"
|
|
|
|
#define PORT(_base, _irq) \
|
|
{ \
|
|
.iobase = _base, \
|
|
.membase = (void __iomem *)_base,\
|
|
.mapbase = _base, \
|
|
.irq = _irq, \
|
|
.uartclk = 0, /* filled */ \
|
|
.regshift = 2, \
|
|
.iotype = UPIO_AU, \
|
|
.flags = UPF_SKIP_TEST | \
|
|
UPF_IOREMAP, \
|
|
}
|
|
|
|
static struct plat_serial8250_port au1x00_data[] = {
|
|
#if defined(CONFIG_SOC_AU1000)
|
|
PORT(UART0_ADDR, AU1000_UART0_INT),
|
|
PORT(UART1_ADDR, AU1000_UART1_INT),
|
|
PORT(UART2_ADDR, AU1000_UART2_INT),
|
|
PORT(UART3_ADDR, AU1000_UART3_INT),
|
|
#elif defined(CONFIG_SOC_AU1500)
|
|
PORT(UART0_ADDR, AU1500_UART0_INT),
|
|
PORT(UART3_ADDR, AU1500_UART3_INT),
|
|
#elif defined(CONFIG_SOC_AU1100)
|
|
PORT(UART0_ADDR, AU1100_UART0_INT),
|
|
PORT(UART1_ADDR, AU1100_UART1_INT),
|
|
PORT(UART2_ADDR, AU1100_UART2_INT),
|
|
PORT(UART3_ADDR, AU1100_UART3_INT),
|
|
#elif defined(CONFIG_SOC_AU1550)
|
|
PORT(UART0_ADDR, AU1550_UART0_INT),
|
|
PORT(UART1_ADDR, AU1550_UART1_INT),
|
|
PORT(UART2_ADDR, AU1550_UART2_INT),
|
|
PORT(UART3_ADDR, AU1550_UART3_INT),
|
|
#elif defined(CONFIG_SOC_AU1200)
|
|
PORT(UART0_ADDR, AU1200_UART0_INT),
|
|
PORT(UART1_ADDR, AU1200_UART1_INT),
|
|
#endif
|
|
{ },
|
|
};
|
|
|
|
static struct platform_device au1x00_device = {
|
|
.name = "serial8250",
|
|
.id = PLAT8250_DEV_AU1X00,
|
|
.dev = {
|
|
.platform_data = au1x00_data,
|
|
},
|
|
};
|
|
|
|
static int __init au1x00_init(void)
|
|
{
|
|
int i;
|
|
unsigned int uartclk;
|
|
|
|
/* get uart clock */
|
|
uartclk = get_au1x00_uart_baud_base() * 16;
|
|
|
|
/* fill up uartclk */
|
|
for (i = 0; au1x00_data[i].flags ; i++)
|
|
au1x00_data[i].uartclk = uartclk;
|
|
|
|
return platform_device_register(&au1x00_device);
|
|
}
|
|
|
|
/* XXX: Yes, I know this doesn't yet work. */
|
|
static void __exit au1x00_exit(void)
|
|
{
|
|
platform_device_unregister(&au1x00_device);
|
|
}
|
|
|
|
module_init(au1x00_init);
|
|
module_exit(au1x00_exit);
|
|
|
|
MODULE_AUTHOR("Pantelis Antoniou <pantelis@embeddedalley.com>");
|
|
MODULE_DESCRIPTION("8250 serial probe module for Au1x000 cards");
|
|
MODULE_LICENSE("GPL");
|