68d1d07b51
libata lets low level drivers build scsi_host_template and register it to the SCSI layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This patch implements SHT initializers which can be used to initialize all the boilerplate entries in a sht. Three variants of them are implemented - BASE, BMDMA and NCQ - for different types of drivers. Note that entries can be overriden by putting individual initializers after the helper macro. All sht tables are identical before and after this patch. Signed-off-by: Tejun Heo <htejun@gmail.com>
315 lines
8.5 KiB
C
315 lines
8.5 KiB
C
/*
|
|
* pata_atiixp.c - ATI PATA for new ATA layer
|
|
* (C) 2005 Red Hat Inc
|
|
* Alan Cox <alan@redhat.com>
|
|
*
|
|
* Based on
|
|
*
|
|
* linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004
|
|
*
|
|
* Copyright (C) 2003 ATI Inc. <hyu@ati.com>
|
|
* Copyright (C) 2004 Bartlomiej Zolnierkiewicz
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_atiixp"
|
|
#define DRV_VERSION "0.4.6"
|
|
|
|
enum {
|
|
ATIIXP_IDE_PIO_TIMING = 0x40,
|
|
ATIIXP_IDE_MWDMA_TIMING = 0x44,
|
|
ATIIXP_IDE_PIO_CONTROL = 0x48,
|
|
ATIIXP_IDE_PIO_MODE = 0x4a,
|
|
ATIIXP_IDE_UDMA_CONTROL = 0x54,
|
|
ATIIXP_IDE_UDMA_MODE = 0x56
|
|
};
|
|
|
|
static int atiixp_pre_reset(struct ata_link *link, unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
static const struct pci_bits atiixp_enable_bits[] = {
|
|
{ 0x48, 1, 0x01, 0x00 },
|
|
{ 0x48, 1, 0x08, 0x00 }
|
|
};
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
|
|
if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
|
|
return -ENOENT;
|
|
|
|
return ata_std_prereset(link, deadline);
|
|
}
|
|
|
|
static void atiixp_error_handler(struct ata_port *ap)
|
|
{
|
|
ata_bmdma_drive_eh(ap, atiixp_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
|
|
}
|
|
|
|
static int atiixp_cable_detect(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u8 udma;
|
|
|
|
/* Hack from drivers/ide/pci. Really we want to know how to do the
|
|
raw detection not play follow the bios mode guess */
|
|
pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
|
|
if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40)
|
|
return ATA_CBL_PATA80;
|
|
return ATA_CBL_PATA40;
|
|
}
|
|
|
|
/**
|
|
* atiixp_set_pio_timing - set initial PIO mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Called by both the pio and dma setup functions to set the controller
|
|
* timings for PIO transfers. We must load both the mode number and
|
|
* timing values into the controller.
|
|
*/
|
|
|
|
static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio)
|
|
{
|
|
static u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 };
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
int dn = 2 * ap->port_no + adev->devno;
|
|
|
|
/* Check this is correct - the order is odd in both drivers */
|
|
int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
|
|
u16 pio_mode_data, pio_timing_data;
|
|
|
|
pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
|
|
pio_mode_data &= ~(0x7 << (4 * dn));
|
|
pio_mode_data |= pio << (4 * dn);
|
|
pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
|
|
|
|
pci_read_config_word(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
|
|
pio_mode_data &= ~(0xFF << timing_shift);
|
|
pio_mode_data |= (pio_timings[pio] << timing_shift);
|
|
pci_write_config_word(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
|
|
}
|
|
|
|
/**
|
|
* atiixp_set_piomode - set initial PIO mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Called to do the PIO mode setup. We use a shared helper for this
|
|
* as the DMA setup must also adjust the PIO timing information.
|
|
*/
|
|
|
|
static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0);
|
|
}
|
|
|
|
/**
|
|
* atiixp_set_dmamode - set initial DMA mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Called to do the DMA mode setup. We use timing tables for most
|
|
* modes but must tune an appropriate PIO mode to match.
|
|
*/
|
|
|
|
static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
static u8 mwdma_timings[5] = { 0x77, 0x21, 0x20 };
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
int dma = adev->dma_mode;
|
|
int dn = 2 * ap->port_no + adev->devno;
|
|
int wanted_pio;
|
|
|
|
if (adev->dma_mode >= XFER_UDMA_0) {
|
|
u16 udma_mode_data;
|
|
|
|
dma -= XFER_UDMA_0;
|
|
|
|
pci_read_config_word(pdev, ATIIXP_IDE_UDMA_MODE, &udma_mode_data);
|
|
udma_mode_data &= ~(0x7 << (4 * dn));
|
|
udma_mode_data |= dma << (4 * dn);
|
|
pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data);
|
|
} else {
|
|
u16 mwdma_timing_data;
|
|
/* Check this is correct - the order is odd in both drivers */
|
|
int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
|
|
|
|
dma -= XFER_MW_DMA_0;
|
|
|
|
pci_read_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, &mwdma_timing_data);
|
|
mwdma_timing_data &= ~(0xFF << timing_shift);
|
|
mwdma_timing_data |= (mwdma_timings[dma] << timing_shift);
|
|
pci_write_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, mwdma_timing_data);
|
|
}
|
|
/*
|
|
* We must now look at the PIO mode situation. We may need to
|
|
* adjust the PIO mode to keep the timings acceptable
|
|
*/
|
|
if (adev->dma_mode >= XFER_MW_DMA_2)
|
|
wanted_pio = 4;
|
|
else if (adev->dma_mode == XFER_MW_DMA_1)
|
|
wanted_pio = 3;
|
|
else if (adev->dma_mode == XFER_MW_DMA_0)
|
|
wanted_pio = 0;
|
|
else BUG();
|
|
|
|
if (adev->pio_mode != wanted_pio)
|
|
atiixp_set_pio_timing(ap, adev, wanted_pio);
|
|
}
|
|
|
|
/**
|
|
* atiixp_bmdma_start - DMA start callback
|
|
* @qc: Command in progress
|
|
*
|
|
* When DMA begins we need to ensure that the UDMA control
|
|
* register for the channel is correctly set.
|
|
*
|
|
* Note: The host lock held by the libata layer protects
|
|
* us from two channels both trying to set DMA bits at once
|
|
*/
|
|
|
|
static void atiixp_bmdma_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_device *adev = qc->dev;
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
int dn = (2 * ap->port_no) + adev->devno;
|
|
u16 tmp16;
|
|
|
|
pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
|
|
if (adev->dma_mode >= XFER_UDMA_0)
|
|
tmp16 |= (1 << dn);
|
|
else
|
|
tmp16 &= ~(1 << dn);
|
|
pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
|
|
ata_bmdma_start(qc);
|
|
}
|
|
|
|
/**
|
|
* atiixp_dma_stop - DMA stop callback
|
|
* @qc: Command in progress
|
|
*
|
|
* DMA has completed. Clear the UDMA flag as the next operations will
|
|
* be PIO ones not UDMA data transfer.
|
|
*
|
|
* Note: The host lock held by the libata layer protects
|
|
* us from two channels both trying to set DMA bits at once
|
|
*/
|
|
|
|
static void atiixp_bmdma_stop(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
int dn = (2 * ap->port_no) + qc->dev->devno;
|
|
u16 tmp16;
|
|
|
|
pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
|
|
tmp16 &= ~(1 << dn);
|
|
pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
|
|
ata_bmdma_stop(qc);
|
|
}
|
|
|
|
static struct scsi_host_template atiixp_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
.sg_tablesize = LIBATA_DUMB_MAX_PRD,
|
|
};
|
|
|
|
static struct ata_port_operations atiixp_port_ops = {
|
|
.set_piomode = atiixp_set_piomode,
|
|
.set_dmamode = atiixp_set_dmamode,
|
|
.mode_filter = ata_pci_default_filter,
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = atiixp_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = atiixp_cable_detect,
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = atiixp_bmdma_start,
|
|
.bmdma_stop = atiixp_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
|
|
.qc_prep = ata_dumb_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.data_xfer = ata_data_xfer,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
.port_start = ata_sff_port_start,
|
|
};
|
|
|
|
static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
static const struct ata_port_info info = {
|
|
.sht = &atiixp_sht,
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = 0x1f,
|
|
.mwdma_mask = 0x06, /* No MWDMA0 support */
|
|
.udma_mask = 0x3F,
|
|
.port_ops = &atiixp_port_ops
|
|
};
|
|
const struct ata_port_info *ppi[] = { &info, NULL };
|
|
return ata_pci_init_one(dev, ppi);
|
|
}
|
|
|
|
static const struct pci_device_id atiixp[] = {
|
|
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), },
|
|
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), },
|
|
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
|
|
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
|
|
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
|
|
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver atiixp_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = atiixp,
|
|
.probe = atiixp_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.resume = ata_pci_device_resume,
|
|
.suspend = ata_pci_device_suspend,
|
|
#endif
|
|
};
|
|
|
|
static int __init atiixp_init(void)
|
|
{
|
|
return pci_register_driver(&atiixp_pci_driver);
|
|
}
|
|
|
|
|
|
static void __exit atiixp_exit(void)
|
|
{
|
|
pci_unregister_driver(&atiixp_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, atiixp);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(atiixp_init);
|
|
module_exit(atiixp_exit);
|