bab588fcfb
This is a larger set of new functionality for the existing SoC families,
including:
* vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850
* prima2 gains support for the "marco" SoC family, its SMP based cousin
* tegra gains support for the new Tegra4 (Tegra114) family
* socfpga now supports a newer version of the hardware including SMP
* i.mx31 and bcm2835 are now using DT probing for their clocks
* lots of updates for sh-mobile
* OMAP updates for clocks, power management and USB
* i.mx6q and tegra now support cpuidle
* kirkwood now supports PCIe hot plugging
* tegra clock support is updated
* tegra USB PHY probing gets implemented diffently
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=PRrg
-----END PGP SIGNATURE-----
Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC-specific updates from Arnd Bergmann:
"This is a larger set of new functionality for the existing SoC
families, including:
- vt8500 gains support for new CPU cores, notably the Cortex-A9 based
wm8850
- prima2 gains support for the "marco" SoC family, its SMP based
cousin
- tegra gains support for the new Tegra4 (Tegra114) family
- socfpga now supports a newer version of the hardware including SMP
- i.mx31 and bcm2835 are now using DT probing for their clocks
- lots of updates for sh-mobile
- OMAP updates for clocks, power management and USB
- i.mx6q and tegra now support cpuidle
- kirkwood now supports PCIe hot plugging
- tegra clock support is updated
- tegra USB PHY probing gets implemented diffently"
* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
ARM: prima2: remove duplicate v7_invalidate_l1
ARM: shmobile: r8a7779: Correct TMU clock support again
ARM: prima2: fix __init section for cpu hotplug
ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
arm: socfpga: Add SMP support for actual socfpga harware
arm: Add v7_invalidate_l1 to cache-v7.S
arm: socfpga: Add entries to enable make dtbs socfpga
arm: socfpga: Add new device tree source for actual socfpga HW
ARM: tegra: sort Kconfig selects for Tegra114
ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
ARM: tegra: Fix build error for gic update
ARM: tegra: remove empty tegra_smp_init_cpus()
ARM: shmobile: Register ARM architected timer
ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
ARM: shmobile: r8a7779: Correct TMU clock support
ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
ARM: mxs: use apbx bus clock to drive the timers on timrotv2
...
636 lines
20 KiB
Plaintext
636 lines
20 KiB
Plaintext
menu "Kernel hacking"
|
|
|
|
source "lib/Kconfig.debug"
|
|
|
|
config STRICT_DEVMEM
|
|
bool "Filter access to /dev/mem"
|
|
depends on MMU
|
|
---help---
|
|
If this option is disabled, you allow userspace (root) access to all
|
|
of memory, including kernel and userspace memory. Accidental
|
|
access to this is obviously disastrous, but specific access can
|
|
be used by people debugging the kernel.
|
|
|
|
If this option is switched on, the /dev/mem file only allows
|
|
userspace access to memory mapped peripherals.
|
|
|
|
If in doubt, say Y.
|
|
|
|
# RMK wants arm kernels compiled with frame pointers or stack unwinding.
|
|
# If you know what you are doing and are willing to live without stack
|
|
# traces, you can get a slightly smaller kernel by setting this option to
|
|
# n, but then RMK will have to kill you ;).
|
|
config FRAME_POINTER
|
|
bool
|
|
depends on !THUMB2_KERNEL
|
|
default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
|
|
help
|
|
If you say N here, the resulting kernel will be slightly smaller and
|
|
faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
|
|
when a problem occurs with the kernel, the information that is
|
|
reported is severely limited.
|
|
|
|
config ARM_UNWIND
|
|
bool "Enable stack unwinding support (EXPERIMENTAL)"
|
|
depends on AEABI
|
|
default y
|
|
help
|
|
This option enables stack unwinding support in the kernel
|
|
using the information automatically generated by the
|
|
compiler. The resulting kernel image is slightly bigger but
|
|
the performance is not affected. Currently, this feature
|
|
only works with EABI compilers. If unsure say Y.
|
|
|
|
config OLD_MCOUNT
|
|
bool
|
|
depends on FUNCTION_TRACER && FRAME_POINTER
|
|
default y
|
|
|
|
config DEBUG_USER
|
|
bool "Verbose user fault messages"
|
|
help
|
|
When a user program crashes due to an exception, the kernel can
|
|
print a brief message explaining what the problem was. This is
|
|
sometimes helpful for debugging but serves no purpose on a
|
|
production system. Most people should say N here.
|
|
|
|
In addition, you need to pass user_debug=N on the kernel command
|
|
line to enable this feature. N consists of the sum of:
|
|
|
|
1 - undefined instruction events
|
|
2 - system calls
|
|
4 - invalid data aborts
|
|
8 - SIGSEGV faults
|
|
16 - SIGBUS faults
|
|
|
|
# These options are only for real kernel hackers who want to get their hands dirty.
|
|
config DEBUG_LL
|
|
bool "Kernel low-level debugging functions (read help!)"
|
|
depends on DEBUG_KERNEL
|
|
help
|
|
Say Y here to include definitions of printascii, printch, printhex
|
|
in the kernel. This is helpful if you are debugging code that
|
|
executes before the console is initialized.
|
|
|
|
Note that selecting this option will limit the kernel to a single
|
|
UART definition, as specified below. Attempting to boot the kernel
|
|
image on a different platform *will not work*, so this option should
|
|
not be enabled for kernels that are intended to be portable.
|
|
|
|
choice
|
|
prompt "Kernel low-level debugging port"
|
|
depends on DEBUG_LL
|
|
|
|
config AT91_DEBUG_LL_DBGU0
|
|
bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
|
|
depends on HAVE_AT91_DBGU0
|
|
|
|
config AT91_DEBUG_LL_DBGU1
|
|
bool "Kernel low-level debugging on 9263 and 9g45"
|
|
depends on HAVE_AT91_DBGU1
|
|
|
|
config DEBUG_CLPS711X_UART1
|
|
bool "Kernel low-level debugging messages via UART1"
|
|
depends on ARCH_CLPS711X
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the first serial port on these devices.
|
|
|
|
config DEBUG_CLPS711X_UART2
|
|
bool "Kernel low-level debugging messages via UART2"
|
|
depends on ARCH_CLPS711X
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the second serial port on these devices.
|
|
|
|
config DEBUG_DAVINCI_DA8XX_UART1
|
|
bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
|
|
depends on ARCH_DAVINCI_DA8XX
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART1 serial port on DaVinci DA8XX devices.
|
|
|
|
config DEBUG_DAVINCI_DA8XX_UART2
|
|
bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
|
|
depends on ARCH_DAVINCI_DA8XX
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART2 serial port on DaVinci DA8XX devices.
|
|
|
|
config DEBUG_DAVINCI_DMx_UART0
|
|
bool "Kernel low-level debugging on DaVinci DMx using UART0"
|
|
depends on ARCH_DAVINCI_DMx
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART0 serial port on DaVinci DMx devices.
|
|
|
|
config DEBUG_DAVINCI_TNETV107X_UART1
|
|
bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
|
|
depends on ARCH_DAVINCI_TNETV107X
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART1 serial port on DaVinci TNETV107X
|
|
devices.
|
|
|
|
config DEBUG_ZYNQ_UART0
|
|
bool "Kernel low-level debugging on Xilinx Zynq using UART0"
|
|
depends on ARCH_ZYNQ
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART0 on the Zynq platform.
|
|
|
|
config DEBUG_ZYNQ_UART1
|
|
bool "Kernel low-level debugging on Xilinx Zynq using UART1"
|
|
depends on ARCH_ZYNQ
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART1 on the Zynq platform.
|
|
|
|
If you have a ZC702 board and want early boot messages to
|
|
appear on the USB serial adaptor, select this option.
|
|
|
|
config DEBUG_DC21285_PORT
|
|
bool "Kernel low-level debugging messages via footbridge serial port"
|
|
depends on FOOTBRIDGE
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the serial port in the DC21285 (Footbridge).
|
|
|
|
config DEBUG_FOOTBRIDGE_COM1
|
|
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
|
|
depends on FOOTBRIDGE
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the 8250 at PCI COM1.
|
|
|
|
config DEBUG_HIGHBANK_UART
|
|
bool "Kernel low-level debugging messages via Highbank UART"
|
|
depends on ARCH_HIGHBANK
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the UART on Highbank based devices.
|
|
|
|
config DEBUG_IMX1_UART
|
|
bool "i.MX1 Debug UART"
|
|
depends on SOC_IMX1
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX1.
|
|
|
|
config DEBUG_IMX23_UART
|
|
bool "i.MX23 Debug UART"
|
|
depends on SOC_IMX23
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX23.
|
|
|
|
config DEBUG_IMX25_UART
|
|
bool "i.MX25 Debug UART"
|
|
depends on SOC_IMX25
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX25.
|
|
|
|
config DEBUG_IMX21_IMX27_UART
|
|
bool "i.MX21 and i.MX27 Debug UART"
|
|
depends on SOC_IMX21 || SOC_IMX27
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX21 or i.MX27.
|
|
|
|
config DEBUG_IMX28_UART
|
|
bool "i.MX28 Debug UART"
|
|
depends on SOC_IMX28
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX28.
|
|
|
|
config DEBUG_IMX31_UART
|
|
bool "i.MX31 Debug UART"
|
|
depends on SOC_IMX31
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX31.
|
|
|
|
config DEBUG_IMX35_UART
|
|
bool "i.MX35 Debug UART"
|
|
depends on SOC_IMX35
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX35.
|
|
|
|
config DEBUG_IMX51_UART
|
|
bool "i.MX51 Debug UART"
|
|
depends on SOC_IMX51
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX51.
|
|
|
|
config DEBUG_IMX53_UART
|
|
bool "i.MX53 Debug UART"
|
|
depends on SOC_IMX53
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX53.
|
|
|
|
config DEBUG_IMX6Q_UART
|
|
bool "i.MX6Q Debug UART"
|
|
depends on SOC_IMX6Q
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on i.MX6Q.
|
|
|
|
config DEBUG_MMP_UART2
|
|
bool "Kernel low-level debugging message via MMP UART2"
|
|
depends on ARCH_MMP
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on MMP UART2.
|
|
|
|
config DEBUG_MMP_UART3
|
|
bool "Kernel low-level debugging message via MMP UART3"
|
|
depends on ARCH_MMP
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on MMP UART3.
|
|
|
|
config DEBUG_MSM_UART1
|
|
bool "Kernel low-level debugging messages via MSM UART1"
|
|
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the first serial port on MSM devices.
|
|
|
|
config DEBUG_MSM_UART2
|
|
bool "Kernel low-level debugging messages via MSM UART2"
|
|
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the second serial port on MSM devices.
|
|
|
|
config DEBUG_MSM_UART3
|
|
bool "Kernel low-level debugging messages via MSM UART3"
|
|
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the third serial port on MSM devices.
|
|
|
|
config DEBUG_MSM8660_UART
|
|
bool "Kernel low-level debugging messages via MSM 8660 UART"
|
|
depends on ARCH_MSM8X60
|
|
select MSM_HAS_DEBUG_UART_HS
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the serial port on MSM 8660 devices.
|
|
|
|
config DEBUG_MSM8960_UART
|
|
bool "Kernel low-level debugging messages via MSM 8960 UART"
|
|
depends on ARCH_MSM8960
|
|
select MSM_HAS_DEBUG_UART_HS
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the serial port on MSM 8960 devices.
|
|
|
|
config DEBUG_MVEBU_UART
|
|
bool "Kernel low-level debugging messages via MVEBU UART"
|
|
depends on ARCH_MVEBU
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on MVEBU based platforms.
|
|
|
|
config DEBUG_OMAP2PLUS_UART
|
|
bool "Kernel low-level debugging messages via OMAP2PLUS UART"
|
|
depends on ARCH_OMAP2PLUS
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on OMAP2PLUS based platforms.
|
|
|
|
config DEBUG_PICOXCELL_UART
|
|
depends on ARCH_PICOXCELL
|
|
bool "Use PicoXcell UART for low-level debug"
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on PicoXcell based platforms.
|
|
|
|
config DEBUG_REALVIEW_STD_PORT
|
|
bool "RealView Default UART"
|
|
depends on ARCH_REALVIEW
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the serial port on RealView EB, PB11MP, PBA8
|
|
and PBX platforms.
|
|
|
|
config DEBUG_REALVIEW_PB1176_PORT
|
|
bool "RealView PB1176 UART"
|
|
depends on MACH_REALVIEW_PB1176
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the standard serial port on the RealView
|
|
PB1176 platform.
|
|
|
|
config DEBUG_S3C_UART0
|
|
depends on PLAT_SAMSUNG
|
|
bool "Use S3C UART 0 for low-level debug"
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART 0. The port must have been initialised
|
|
by the boot-loader before use.
|
|
|
|
The uncompressor code port configuration is now handled
|
|
by CONFIG_S3C_LOWLEVEL_UART_PORT.
|
|
|
|
config DEBUG_S3C_UART1
|
|
depends on PLAT_SAMSUNG
|
|
bool "Use S3C UART 1 for low-level debug"
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART 1. The port must have been initialised
|
|
by the boot-loader before use.
|
|
|
|
The uncompressor code port configuration is now handled
|
|
by CONFIG_S3C_LOWLEVEL_UART_PORT.
|
|
|
|
config DEBUG_S3C_UART2
|
|
depends on PLAT_SAMSUNG
|
|
bool "Use S3C UART 2 for low-level debug"
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART 2. The port must have been initialised
|
|
by the boot-loader before use.
|
|
|
|
The uncompressor code port configuration is now handled
|
|
by CONFIG_S3C_LOWLEVEL_UART_PORT.
|
|
|
|
config DEBUG_S3C_UART3
|
|
depends on PLAT_SAMSUNG && ARCH_EXYNOS
|
|
bool "Use S3C UART 3 for low-level debug"
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to UART 3. The port must have been initialised
|
|
by the boot-loader before use.
|
|
|
|
The uncompressor code port configuration is now handled
|
|
by CONFIG_S3C_LOWLEVEL_UART_PORT.
|
|
|
|
config DEBUG_SOCFPGA_UART
|
|
depends on ARCH_SOCFPGA
|
|
bool "Use SOCFPGA UART for low-level debug"
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on SOCFPGA based platforms.
|
|
|
|
config DEBUG_SUNXI_UART0
|
|
bool "Kernel low-level debugging messages via sunXi UART0"
|
|
depends on ARCH_SUNXI
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Allwinner A1X based platforms on the UART0.
|
|
|
|
config DEBUG_SUNXI_UART1
|
|
bool "Kernel low-level debugging messages via sunXi UART1"
|
|
depends on ARCH_SUNXI
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Allwinner A1X based platforms on the UART1.
|
|
|
|
config DEBUG_TEGRA_UART
|
|
depends on ARCH_TEGRA
|
|
bool "Use Tegra UART for low-level debug"
|
|
help
|
|
Say Y here if you want kernel low-level debugging support
|
|
on Tegra based platforms.
|
|
|
|
config DEBUG_SIRFPRIMA2_UART1
|
|
bool "Kernel low-level debugging messages via SiRFprimaII UART1"
|
|
depends on ARCH_PRIMA2
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the uart1 port on SiRFprimaII devices.
|
|
|
|
config DEBUG_SIRFMARCO_UART1
|
|
bool "Kernel low-level debugging messages via SiRFmarco UART1"
|
|
depends on ARCH_MARCO
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the uart1 port on SiRFmarco devices.
|
|
|
|
config DEBUG_VEXPRESS_UART0_DETECT
|
|
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
|
|
depends on ARCH_VEXPRESS && CPU_CP15_MMU
|
|
help
|
|
This option enables a simple heuristic which tries to determine
|
|
the motherboard's memory map variant (original or RS1) and then
|
|
choose the relevant UART0 base address.
|
|
|
|
Note that this will only work with standard A-class core tiles,
|
|
and may fail with non-standard SMM or custom software models.
|
|
|
|
config DEBUG_VEXPRESS_UART0_CA9
|
|
bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)"
|
|
depends on ARCH_VEXPRESS
|
|
help
|
|
This option selects UART0 at 0x10009000. Except for custom models,
|
|
this applies only to the V2P-CA9 tile.
|
|
|
|
config DEBUG_VEXPRESS_UART0_RS1
|
|
bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)"
|
|
depends on ARCH_VEXPRESS
|
|
help
|
|
This option selects UART0 at 0x1c090000. This applies to most
|
|
of the tiles using the RS1 memory map, including all new A-class
|
|
core tiles, FPGA-based SMMs and software models.
|
|
|
|
config DEBUG_VT8500_UART0
|
|
bool "Use UART0 on VIA/Wondermedia SoCs"
|
|
depends on ARCH_VT8500
|
|
help
|
|
This option selects UART0 on VIA/Wondermedia System-on-a-chip
|
|
devices, including VT8500, WM8505, WM8650 and WM8850.
|
|
|
|
config DEBUG_LL_UART_NONE
|
|
bool "No low-level debugging UART"
|
|
depends on !ARCH_MULTIPLATFORM
|
|
help
|
|
Say Y here if your platform doesn't provide a UART option
|
|
below. This relies on your platform choosing the right UART
|
|
definition internally in order for low-level debugging to
|
|
work.
|
|
|
|
config DEBUG_ICEDCC
|
|
bool "Kernel low-level debugging via EmbeddedICE DCC channel"
|
|
help
|
|
Say Y here if you want the debug print routines to direct
|
|
their output to the EmbeddedICE macrocell's DCC channel using
|
|
co-processor 14. This is known to work on the ARM9 style ICE
|
|
channel and on the XScale with the PEEDI.
|
|
|
|
Note that the system will appear to hang during boot if there
|
|
is nothing connected to read from the DCC.
|
|
|
|
config DEBUG_SEMIHOSTING
|
|
bool "Kernel low-level debug output via semihosting I/O"
|
|
help
|
|
Semihosting enables code running on an ARM target to use
|
|
the I/O facilities on a host debugger/emulator through a
|
|
simple SVC call. The host debugger or emulator must have
|
|
semihosting enabled for the special svc call to be trapped
|
|
otherwise the kernel will crash.
|
|
|
|
This is known to work with OpenOCD, as well as
|
|
ARM's Fast Models, or any other controlling environment
|
|
that implements semihosting.
|
|
|
|
For more details about semihosting, please see
|
|
chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
|
|
|
|
endchoice
|
|
|
|
config DEBUG_IMX_UART_PORT
|
|
int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
|
|
DEBUG_IMX25_UART || \
|
|
DEBUG_IMX21_IMX27_UART || \
|
|
DEBUG_IMX31_UART || \
|
|
DEBUG_IMX35_UART || \
|
|
DEBUG_IMX51_UART || \
|
|
DEBUG_IMX50_IMX53_UART || \
|
|
DEBUG_IMX6Q_UART
|
|
default 1
|
|
help
|
|
Choose UART port on which kernel low-level debug messages
|
|
should be output.
|
|
|
|
choice
|
|
prompt "Low-level debug console UART"
|
|
depends on DEBUG_OMAP2PLUS_UART
|
|
|
|
config DEBUG_OMAP2UART1
|
|
bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
|
|
help
|
|
This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
|
|
omap3 torpedo and 3530 lv som.
|
|
|
|
config DEBUG_OMAP2UART2
|
|
bool "OMAP2/3/4 UART2"
|
|
|
|
config DEBUG_OMAP2UART3
|
|
bool "OMAP2 UART3 (n8x0)"
|
|
|
|
config DEBUG_OMAP3UART3
|
|
bool "OMAP3 UART3 (most omap3 boards)"
|
|
help
|
|
This covers at least cm_t3x, beagle, crane, devkit8000,
|
|
igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
|
|
and 3517evm.
|
|
|
|
config DEBUG_OMAP4UART3
|
|
bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
|
|
|
|
config DEBUG_OMAP3UART4
|
|
bool "OMAP36XX UART4"
|
|
|
|
config DEBUG_OMAP4UART4
|
|
bool "OMAP4/5 UART4"
|
|
|
|
config DEBUG_TI81XXUART1
|
|
bool "TI81XX UART1 (ti8148evm)"
|
|
|
|
config DEBUG_TI81XXUART2
|
|
bool "TI81XX UART2"
|
|
|
|
config DEBUG_TI81XXUART3
|
|
bool "TI81XX UART3 (ti8168evm)"
|
|
|
|
config DEBUG_AM33XXUART1
|
|
bool "AM33XX UART1"
|
|
|
|
config DEBUG_ZOOM_UART
|
|
bool "Zoom2/3 UART"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Low-level debug console UART"
|
|
depends on DEBUG_LL && DEBUG_TEGRA_UART
|
|
|
|
config TEGRA_DEBUG_UART_AUTO_ODMDATA
|
|
bool "Via ODMDATA"
|
|
help
|
|
Automatically determines which UART to use for low-level debug based
|
|
on the ODMDATA value. This value is part of the BCT, and is written
|
|
to the boot memory device using nvflash, or other flashing tool.
|
|
When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
|
|
0/1/2/3/4 are UART A/B/C/D/E.
|
|
|
|
config TEGRA_DEBUG_UARTA
|
|
bool "UART A"
|
|
|
|
config TEGRA_DEBUG_UARTB
|
|
bool "UART B"
|
|
|
|
config TEGRA_DEBUG_UARTC
|
|
bool "UART C"
|
|
|
|
config TEGRA_DEBUG_UARTD
|
|
bool "UART D"
|
|
|
|
config TEGRA_DEBUG_UARTE
|
|
bool "UART E"
|
|
|
|
endchoice
|
|
|
|
config DEBUG_LL_INCLUDE
|
|
string
|
|
default "debug/icedcc.S" if DEBUG_ICEDCC
|
|
default "debug/imx.S" if DEBUG_IMX1_UART || \
|
|
DEBUG_IMX25_UART || \
|
|
DEBUG_IMX21_IMX27_UART || \
|
|
DEBUG_IMX31_UART || \
|
|
DEBUG_IMX35_UART || \
|
|
DEBUG_IMX51_UART || \
|
|
DEBUG_IMX53_UART ||\
|
|
DEBUG_IMX6Q_UART
|
|
default "debug/highbank.S" if DEBUG_HIGHBANK_UART
|
|
default "debug/mvebu.S" if DEBUG_MVEBU_UART
|
|
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
|
|
default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
|
|
default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
|
|
default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
|
|
default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
|
|
DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
|
|
default "debug/vt8500.S" if DEBUG_VT8500_UART0
|
|
default "debug/tegra.S" if DEBUG_TEGRA_UART
|
|
default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
|
|
default "mach/debug-macro.S"
|
|
|
|
config EARLY_PRINTK
|
|
bool "Early printk"
|
|
depends on DEBUG_LL
|
|
help
|
|
Say Y here if you want to have an early console using the
|
|
kernel low-level debugging functions. Add earlyprintk to your
|
|
kernel parameters to enable this console.
|
|
|
|
config OC_ETM
|
|
bool "On-chip ETM and ETB"
|
|
depends on ARM_AMBA
|
|
help
|
|
Enables the on-chip embedded trace macrocell and embedded trace
|
|
buffer driver that will allow you to collect traces of the
|
|
kernel code.
|
|
|
|
config ARM_KPROBES_TEST
|
|
tristate "Kprobes test module"
|
|
depends on KPROBES && MODULES
|
|
help
|
|
Perform tests of kprobes API and instruction set simulation.
|
|
|
|
config PID_IN_CONTEXTIDR
|
|
bool "Write the current PID to the CONTEXTIDR register"
|
|
depends on CPU_COPY_V6
|
|
help
|
|
Enabling this option causes the kernel to write the current PID to
|
|
the PROCID field of the CONTEXTIDR register, at the expense of some
|
|
additional instructions during context switch. Say Y here only if you
|
|
are planning to use hardware trace tools with this kernel.
|
|
|
|
endmenu
|