kernel-aes67/arch/arm26/mm/fault.c
Sukadev Bhattiprolu f400e198b2 [PATCH] pidspace: is_init()
This is an updated version of Eric Biederman's is_init() patch.
(http://lkml.org/lkml/2006/2/6/280).  It applies cleanly to 2.6.18-rc3 and
replaces a few more instances of ->pid == 1 with is_init().

Further, is_init() checks pid and thus removes dependency on Eric's other
patches for now.

Eric's original description:

	There are a lot of places in the kernel where we test for init
	because we give it special properties.  Most  significantly init
	must not die.  This results in code all over the kernel test
	->pid == 1.

	Introduce is_init to capture this case.

	With multiple pid spaces for all of the cases affected we are
	looking for only the first process on the system, not some other
	process that has pid == 1.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: <lxc-devel@lists.sourceforge.net>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 09:18:12 -07:00

315 lines
7.1 KiB
C

/*
* linux/arch/arm26/mm/fault.c
*
* Copyright (C) 1995 Linus Torvalds
* Modifications for ARM processor (c) 1995-2001 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/uaccess.h> //FIXME this header may be bogusly included
#include "fault.h"
#define FAULT_CODE_LDRSTRPOST 0x80
#define FAULT_CODE_LDRSTRPRE 0x40
#define FAULT_CODE_LDRSTRREG 0x20
#define FAULT_CODE_LDMSTM 0x10
#define FAULT_CODE_LDCSTC 0x08
#define FAULT_CODE_PREFETCH 0x04
#define FAULT_CODE_WRITE 0x02
#define FAULT_CODE_FORCECOW 0x01
#define DO_COW(m) ((m) & (FAULT_CODE_WRITE|FAULT_CODE_FORCECOW))
#define READ_FAULT(m) (!((m) & FAULT_CODE_WRITE))
#define DEBUG
/*
* This is useful to dump out the page tables associated with
* 'addr' in mm 'mm'.
*/
void show_pte(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pgd;
if (!mm)
mm = &init_mm;
printk(KERN_ALERT "pgd = %p\n", mm->pgd);
pgd = pgd_offset(mm, addr);
printk(KERN_ALERT "[%08lx] *pgd=%08lx", addr, pgd_val(*pgd));
do {
pmd_t *pmd;
pte_t *pte;
pmd = pmd_offset(pgd, addr);
if (pmd_none(*pmd))
break;
if (pmd_bad(*pmd)) {
printk("(bad)");
break;
}
/* We must not map this if we have highmem enabled */
/* FIXME */
pte = pte_offset_map(pmd, addr);
printk(", *pte=%08lx", pte_val(*pte));
pte_unmap(pte);
} while(0);
printk("\n");
}
/*
* Oops. The kernel tried to access some page that wasn't present.
*/
static void
__do_kernel_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
/*
* Are we prepared to handle this kernel fault?
*/
if (fixup_exception(regs))
return;
/*
* No handler, we'll have to terminate things with extreme prejudice.
*/
bust_spinlocks(1);
printk(KERN_ALERT
"Unable to handle kernel %s at virtual address %08lx\n",
(addr < PAGE_SIZE) ? "NULL pointer dereference" :
"paging request", addr);
show_pte(mm, addr);
die("Oops", regs, fsr);
bust_spinlocks(0);
do_exit(SIGKILL);
}
/*
* Something tried to access memory that isn't in our memory map..
* User mode accesses just cause a SIGSEGV
*/
static void
__do_user_fault(struct task_struct *tsk, unsigned long addr,
unsigned int fsr, int code, struct pt_regs *regs)
{
struct siginfo si;
#ifdef CONFIG_DEBUG_USER
printk("%s: unhandled page fault at 0x%08lx, code 0x%03x\n",
tsk->comm, addr, fsr);
show_pte(tsk->mm, addr);
show_regs(regs);
//dump_backtrace(regs, tsk); // FIXME ARM32 dropped this - why?
while(1); //FIXME - hack to stop debug going nutso
#endif
tsk->thread.address = addr;
tsk->thread.error_code = fsr;
tsk->thread.trap_no = 14;
si.si_signo = SIGSEGV;
si.si_errno = 0;
si.si_code = code;
si.si_addr = (void *)addr;
force_sig_info(SIGSEGV, &si, tsk);
}
static int
__do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
struct task_struct *tsk)
{
struct vm_area_struct *vma;
int fault, mask;
vma = find_vma(mm, addr);
fault = -2; /* bad map area */
if (!vma)
goto out;
if (vma->vm_start > addr)
goto check_stack;
/*
* Ok, we have a good vm_area for this
* memory access, so we can handle it.
*/
good_area:
if (READ_FAULT(fsr)) /* read? */
mask = VM_READ|VM_EXEC|VM_WRITE;
else
mask = VM_WRITE;
fault = -1; /* bad access type */
if (!(vma->vm_flags & mask))
goto out;
/*
* If for any reason at all we couldn't handle
* the fault, make sure we exit gracefully rather
* than endlessly redo the fault.
*/
survive:
fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, DO_COW(fsr));
/*
* Handle the "normal" cases first - successful and sigbus
*/
switch (fault) {
case VM_FAULT_MAJOR:
tsk->maj_flt++;
return fault;
case VM_FAULT_MINOR:
tsk->min_flt++;
case VM_FAULT_SIGBUS:
return fault;
}
fault = -3; /* out of memory */
if (!is_init(tsk))
goto out;
/*
* If we are out of memory for pid1,
* sleep for a while and retry
*/
yield();
goto survive;
check_stack:
if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
goto good_area;
out:
return fault;
}
int do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
struct task_struct *tsk;
struct mm_struct *mm;
int fault;
tsk = current;
mm = tsk->mm;
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
*/
if (in_interrupt() || !mm)
goto no_context;
down_read(&mm->mmap_sem);
fault = __do_page_fault(mm, addr, fsr, tsk);
up_read(&mm->mmap_sem);
/*
* Handle the "normal" case first
*/
switch (fault) {
case VM_FAULT_MINOR:
case VM_FAULT_MAJOR:
return 0;
case VM_FAULT_SIGBUS:
goto do_sigbus;
}
/*
* If we are in kernel mode at this point, we
* have no context to handle this fault with.
* FIXME - is this test right?
*/
if (!user_mode(regs)){
goto no_context;
}
if (fault == -3) {
/*
* We ran out of memory, or some other thing happened to
* us that made us unable to handle the page fault gracefully.
*/
printk("VM: killing process %s\n", tsk->comm);
do_exit(SIGKILL);
}
else{
__do_user_fault(tsk, addr, fsr, fault == -1 ? SEGV_ACCERR : SEGV_MAPERR, regs);
}
return 0;
/*
* We ran out of memory, or some other thing happened to us that made
* us unable to handle the page fault gracefully.
*/
do_sigbus:
/*
* Send a sigbus, regardless of whether we were in kernel
* or user mode.
*/
tsk->thread.address = addr; //FIXME - need other bits setting?
tsk->thread.error_code = fsr;
tsk->thread.trap_no = 14;
force_sig(SIGBUS, tsk);
#ifdef CONFIG_DEBUG_USER
printk(KERN_DEBUG "%s: sigbus at 0x%08lx, pc=0x%08lx\n",
current->comm, addr, instruction_pointer(regs));
#endif
/* Kernel mode? Handle exceptions or die */
if (user_mode(regs))
return 0;
no_context:
__do_kernel_fault(mm, addr, fsr, regs);
return 0;
}
/*
* Handle a data abort. Note that we have to handle a range of addresses
* on ARM2/3 for ldm. If both pages are zero-mapped, then we have to force
* a copy-on-write. However, on the second page, we always force COW.
*/
asmlinkage void
do_DataAbort(unsigned long min_addr, unsigned long max_addr, int mode, struct pt_regs *regs)
{
do_page_fault(min_addr, mode, regs);
if ((min_addr ^ max_addr) >> PAGE_SHIFT){
do_page_fault(max_addr, mode | FAULT_CODE_FORCECOW, regs);
}
}
asmlinkage int
do_PrefetchAbort(unsigned long addr, struct pt_regs *regs)
{
#if 0
if (the memc mapping for this page exists) {
printk ("Page in, but got abort (undefined instruction?)\n");
return 0;
}
#endif
do_page_fault(addr, FAULT_CODE_PREFETCH, regs);
return 1;
}