f3d9478b2c
This large patch adds all of snd-aoa. Consisting of many modules, it currently replaces snd-powermac for all layout-id based machines and handles many more (for example new powerbooks and powermacs with digital output that previously couldn't be used at all). It also has support for all layout-IDs that Apple has (judging from their Info.plist file) but not all are tested. The driver currently has 2 known regressions over snd-powermac: * it doesn't handle powermac 7,2 and 7,3 * it doesn't have a DRC control on snapper-based machines I will fix those during the 2.6.18 development cycle. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
97 lines
2.6 KiB
Plaintext
97 lines
2.6 KiB
Plaintext
# sound/Config.in
|
|
#
|
|
|
|
menu "Sound"
|
|
|
|
config SOUND
|
|
tristate "Sound card support"
|
|
help
|
|
If you have a sound card in your computer, i.e. if it can say more
|
|
than an occasional beep, say Y. Be sure to have all the information
|
|
about your sound card and its configuration down (I/O port,
|
|
interrupt and DMA channel), because you will be asked for it.
|
|
|
|
You want to read the Sound-HOWTO, available from
|
|
<http://www.tldp.org/docs.html#howto>. General information about
|
|
the modular sound system is contained in the files
|
|
<file:Documentation/sound/oss/Introduction>. The file
|
|
<file:Documentation/sound/oss/README.OSS> contains some slightly
|
|
outdated but still useful information as well. Newer sound
|
|
driver documentation is found in <file:Documentation/sound/alsa/*>.
|
|
|
|
If you have a PnP sound card and you want to configure it at boot
|
|
time using the ISA PnP tools (read
|
|
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
|
|
compile the sound card support as a module and load that module
|
|
after the PnP configuration is finished. To do this, choose M here
|
|
and read <file:Documentation/sound/oss/README.modules>; the module
|
|
will be called soundcore.
|
|
|
|
I'm told that even without a sound card, you can make your computer
|
|
say more than an occasional beep, by programming the PC speaker.
|
|
Kernel patches and supporting utilities to do that are in the pcsp
|
|
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
|
|
|
|
source "sound/oss/dmasound/Kconfig"
|
|
|
|
if !M68K
|
|
|
|
menu "Advanced Linux Sound Architecture"
|
|
depends on SOUND!=n
|
|
|
|
config SND
|
|
tristate "Advanced Linux Sound Architecture"
|
|
depends on SOUND
|
|
help
|
|
Say 'Y' or 'M' to enable ALSA (Advanced Linux Sound Architecture),
|
|
the new base sound system.
|
|
|
|
For more information, see <http://www.alsa-project.org/>
|
|
|
|
source "sound/core/Kconfig"
|
|
|
|
source "sound/drivers/Kconfig"
|
|
|
|
source "sound/isa/Kconfig"
|
|
|
|
source "sound/pci/Kconfig"
|
|
|
|
source "sound/ppc/Kconfig"
|
|
|
|
source "sound/aoa/Kconfig"
|
|
|
|
source "sound/arm/Kconfig"
|
|
|
|
source "sound/mips/Kconfig"
|
|
|
|
# the following will depenend on the order of config.
|
|
# here assuming USB is defined before ALSA
|
|
source "sound/usb/Kconfig"
|
|
|
|
# the following will depenend on the order of config.
|
|
# here assuming PCMCIA is defined before ALSA
|
|
source "sound/pcmcia/Kconfig"
|
|
|
|
source "sound/sparc/Kconfig"
|
|
|
|
source "sound/parisc/Kconfig"
|
|
|
|
endmenu
|
|
|
|
menu "Open Sound System"
|
|
depends on SOUND!=n
|
|
|
|
config SOUND_PRIME
|
|
tristate "Open Sound System (DEPRECATED)"
|
|
depends on SOUND
|
|
help
|
|
Say 'Y' or 'M' to enable Open Sound System drivers.
|
|
|
|
source "sound/oss/Kconfig"
|
|
|
|
endmenu
|
|
|
|
endif
|
|
|
|
endmenu
|