kernel-aes67/drivers/serial/sunhv.c
David S. Miller f5deb807b8 [SPARC] serial: Make sure sysfs nodes get named correctly.
Because we play this trick where we use ttyS? in increasing minor
numbers for different sunfoo.c drivers, we have to inform the TTY
layer of this.

Do so by setting the tty->name_base appropriately.

Probably there should be a generic way to do this in the serial core,
but for now...

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:13:47 -08:00

551 lines
11 KiB
C

/* sunhv.c: Serial driver for SUN4V hypervisor console.
*
* Copyright (C) 2006 David S. Miller (davem@davemloft.net)
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/major.h>
#include <linux/circ_buf.h>
#include <linux/serial.h>
#include <linux/sysrq.h>
#include <linux/console.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <asm/hypervisor.h>
#include <asm/spitfire.h>
#include <asm/vdev.h>
#include <asm/oplib.h>
#include <asm/irq.h>
#if defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
#include <linux/serial_core.h>
#include "suncore.h"
#define CON_BREAK ((long)-1)
#define CON_HUP ((long)-2)
static inline long hypervisor_con_getchar(long *status)
{
register unsigned long func asm("%o5");
register unsigned long arg0 asm("%o0");
register unsigned long arg1 asm("%o1");
func = HV_FAST_CONS_GETCHAR;
arg0 = 0;
arg1 = 0;
__asm__ __volatile__("ta %6"
: "=&r" (func), "=&r" (arg0), "=&r" (arg1)
: "0" (func), "1" (arg0), "2" (arg1),
"i" (HV_FAST_TRAP));
*status = arg0;
return (long) arg1;
}
static inline long hypervisor_con_putchar(long ch)
{
register unsigned long func asm("%o5");
register unsigned long arg0 asm("%o0");
func = HV_FAST_CONS_PUTCHAR;
arg0 = ch;
__asm__ __volatile__("ta %4"
: "=&r" (func), "=&r" (arg0)
: "0" (func), "1" (arg0), "i" (HV_FAST_TRAP));
return (long) arg0;
}
#define IGNORE_BREAK 0x1
#define IGNORE_ALL 0x2
static int hung_up = 0;
static struct tty_struct *receive_chars(struct uart_port *port, struct pt_regs *regs)
{
struct tty_struct *tty = NULL;
int saw_console_brk = 0;
int limit = 10000;
if (port->info != NULL) /* Unopened serial console */
tty = port->info->tty;
while (limit-- > 0) {
long status;
long c = hypervisor_con_getchar(&status);
unsigned char flag;
if (status == HV_EWOULDBLOCK)
break;
if (c == CON_BREAK) {
if (uart_handle_break(port))
continue;
saw_console_brk = 1;
c = 0;
}
if (c == CON_HUP) {
hung_up = 1;
uart_handle_dcd_change(port, 0);
} else if (hung_up) {
hung_up = 0;
uart_handle_dcd_change(port, 1);
}
if (tty == NULL) {
uart_handle_sysrq_char(port, c, regs);
continue;
}
flag = TTY_NORMAL;
port->icount.rx++;
if (c == CON_BREAK) {
port->icount.brk++;
if (uart_handle_break(port))
continue;
flag = TTY_BREAK;
}
if (uart_handle_sysrq_char(port, c, regs))
continue;
if ((port->ignore_status_mask & IGNORE_ALL) ||
((port->ignore_status_mask & IGNORE_BREAK) &&
(c == CON_BREAK)))
continue;
tty_insert_flip_char(tty, c, flag);
}
if (saw_console_brk)
sun_do_break();
return tty;
}
static void transmit_chars(struct uart_port *port)
{
struct circ_buf *xmit;
if (!port->info)
return;
xmit = &port->info->xmit;
if (uart_circ_empty(xmit) || uart_tx_stopped(port))
return;
while (!uart_circ_empty(xmit)) {
long status = hypervisor_con_putchar(xmit->buf[xmit->tail]);
if (status != HV_EOK)
break;
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
}
static irqreturn_t sunhv_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
struct uart_port *port = dev_id;
struct tty_struct *tty;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
tty = receive_chars(port, regs);
transmit_chars(port);
spin_unlock_irqrestore(&port->lock, flags);
if (tty)
tty_flip_buffer_push(tty);
return IRQ_HANDLED;
}
/* port->lock is not held. */
static unsigned int sunhv_tx_empty(struct uart_port *port)
{
/* Transmitter is always empty for us. If the circ buffer
* is non-empty or there is an x_char pending, our caller
* will do the right thing and ignore what we return here.
*/
return TIOCSER_TEMT;
}
/* port->lock held by caller. */
static void sunhv_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
return;
}
/* port->lock is held by caller and interrupts are disabled. */
static unsigned int sunhv_get_mctrl(struct uart_port *port)
{
return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS;
}
/* port->lock held by caller. */
static void sunhv_stop_tx(struct uart_port *port)
{
return;
}
/* port->lock held by caller. */
static void sunhv_start_tx(struct uart_port *port)
{
struct circ_buf *xmit = &port->info->xmit;
while (!uart_circ_empty(xmit)) {
long status = hypervisor_con_putchar(xmit->buf[xmit->tail]);
if (status != HV_EOK)
break;
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
}
}
/* port->lock is not held. */
static void sunhv_send_xchar(struct uart_port *port, char ch)
{
unsigned long flags;
int limit = 10000;
spin_lock_irqsave(&port->lock, flags);
while (limit-- > 0) {
long status = hypervisor_con_putchar(ch);
if (status == HV_EOK)
break;
}
spin_unlock_irqrestore(&port->lock, flags);
}
/* port->lock held by caller. */
static void sunhv_stop_rx(struct uart_port *port)
{
}
/* port->lock held by caller. */
static void sunhv_enable_ms(struct uart_port *port)
{
}
/* port->lock is not held. */
static void sunhv_break_ctl(struct uart_port *port, int break_state)
{
if (break_state) {
unsigned long flags;
int limit = 1000000;
spin_lock_irqsave(&port->lock, flags);
while (limit-- > 0) {
long status = hypervisor_con_putchar(CON_BREAK);
if (status == HV_EOK)
break;
udelay(2);
}
spin_unlock_irqrestore(&port->lock, flags);
}
}
/* port->lock is not held. */
static int sunhv_startup(struct uart_port *port)
{
return 0;
}
/* port->lock is not held. */
static void sunhv_shutdown(struct uart_port *port)
{
}
/* port->lock is not held. */
static void sunhv_set_termios(struct uart_port *port, struct termios *termios,
struct termios *old)
{
unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
unsigned int quot = uart_get_divisor(port, baud);
unsigned int iflag, cflag;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
iflag = termios->c_iflag;
cflag = termios->c_cflag;
port->ignore_status_mask = 0;
if (iflag & IGNBRK)
port->ignore_status_mask |= IGNORE_BREAK;
if ((cflag & CREAD) == 0)
port->ignore_status_mask |= IGNORE_ALL;
/* XXX */
uart_update_timeout(port, cflag,
(port->uartclk / (16 * quot)));
spin_unlock_irqrestore(&port->lock, flags);
}
static const char *sunhv_type(struct uart_port *port)
{
return "SUN4V HCONS";
}
static void sunhv_release_port(struct uart_port *port)
{
}
static int sunhv_request_port(struct uart_port *port)
{
return 0;
}
static void sunhv_config_port(struct uart_port *port, int flags)
{
}
static int sunhv_verify_port(struct uart_port *port, struct serial_struct *ser)
{
return -EINVAL;
}
static struct uart_ops sunhv_pops = {
.tx_empty = sunhv_tx_empty,
.set_mctrl = sunhv_set_mctrl,
.get_mctrl = sunhv_get_mctrl,
.stop_tx = sunhv_stop_tx,
.start_tx = sunhv_start_tx,
.send_xchar = sunhv_send_xchar,
.stop_rx = sunhv_stop_rx,
.enable_ms = sunhv_enable_ms,
.break_ctl = sunhv_break_ctl,
.startup = sunhv_startup,
.shutdown = sunhv_shutdown,
.set_termios = sunhv_set_termios,
.type = sunhv_type,
.release_port = sunhv_release_port,
.request_port = sunhv_request_port,
.config_port = sunhv_config_port,
.verify_port = sunhv_verify_port,
};
static struct uart_driver sunhv_reg = {
.owner = THIS_MODULE,
.driver_name = "serial",
.devfs_name = "tts/",
.dev_name = "ttyS",
.major = TTY_MAJOR,
};
static struct uart_port *sunhv_port;
static inline void sunhv_console_putchar(struct uart_port *port, char c)
{
unsigned long flags;
int limit = 1000000;
spin_lock_irqsave(&port->lock, flags);
while (limit-- > 0) {
long status = hypervisor_con_putchar(c);
if (status == HV_EOK)
break;
udelay(2);
}
spin_unlock_irqrestore(&port->lock, flags);
}
static void sunhv_console_write(struct console *con, const char *s, unsigned n)
{
struct uart_port *port = sunhv_port;
int i;
for (i = 0; i < n; i++) {
if (*s == '\n')
sunhv_console_putchar(port, '\r');
sunhv_console_putchar(port, *s++);
}
}
static struct console sunhv_console = {
.name = "ttyHV",
.write = sunhv_console_write,
.device = uart_console_device,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &sunhv_reg,
};
static inline struct console *SUNHV_CONSOLE(void)
{
if (con_is_present())
return NULL;
sunhv_console.index = 0;
return &sunhv_console;
}
static int __init hv_console_compatible(char *buf, int len)
{
while (len) {
int this_len;
if (!strcmp(buf, "qcn"))
return 1;
this_len = strlen(buf) + 1;
buf += this_len;
len -= this_len;
}
return 0;
}
static unsigned int __init get_interrupt(void)
{
const char *cons_str = "console";
const char *compat_str = "compatible";
int node = prom_getchild(sun4v_vdev_root);
char buf[64];
int err, len;
node = prom_searchsiblings(node, cons_str);
if (!node)
return 0;
len = prom_getproplen(node, compat_str);
if (len == 0 || len == -1)
return 0;
err = prom_getproperty(node, compat_str, buf, 64);
if (err == -1)
return 0;
if (!hv_console_compatible(buf, len))
return 0;
/* Ok, the this is the OBP node for the sun4v hypervisor
* console device. Decode the interrupt.
*/
return sun4v_vdev_device_interrupt(node);
}
static int __init sunhv_init(void)
{
struct uart_port *port;
int ret;
if (tlb_type != hypervisor)
return -ENODEV;
port = kmalloc(sizeof(struct uart_port), GFP_KERNEL);
if (unlikely(!port))
return -ENOMEM;
memset(port, 0, sizeof(struct uart_port));
port->line = 0;
port->ops = &sunhv_pops;
port->type = PORT_SUNHV;
port->uartclk = ( 29491200 / 16 ); /* arbitrary */
/* Set this just to make uart_configure_port() happy. */
port->membase = (unsigned char __iomem *) __pa(port);
port->irq = get_interrupt();
if (!port->irq) {
kfree(port);
return -ENODEV;
}
sunhv_reg.minor = sunserial_current_minor;
sunhv_reg.nr = 1;
ret = uart_register_driver(&sunhv_reg);
if (ret < 0) {
printk(KERN_ERR "SUNHV: uart_register_driver() failed %d\n",
ret);
kfree(port);
return ret;
}
sunhv_reg.tty_driver->name_base = sunhv_reg.minor - 64;
sunserial_current_minor += 1;
sunhv_reg.cons = SUNHV_CONSOLE();
sunhv_port = port;
ret = uart_add_one_port(&sunhv_reg, port);
if (ret < 0) {
printk(KERN_ERR "SUNHV: uart_add_one_port() failed %d\n", ret);
sunserial_current_minor -= 1;
uart_unregister_driver(&sunhv_reg);
kfree(port);
sunhv_port = NULL;
return -ENODEV;
}
if (request_irq(port->irq, sunhv_interrupt,
SA_SHIRQ, "serial(sunhv)", port)) {
printk(KERN_ERR "sunhv: Cannot register IRQ\n");
uart_remove_one_port(&sunhv_reg, port);
sunserial_current_minor -= 1;
uart_unregister_driver(&sunhv_reg);
kfree(port);
sunhv_port = NULL;
return -ENODEV;
}
return 0;
}
static void __exit sunhv_exit(void)
{
struct uart_port *port = sunhv_port;
BUG_ON(!port);
free_irq(port->irq, port);
uart_remove_one_port(&sunhv_reg, port);
sunserial_current_minor -= 1;
uart_unregister_driver(&sunhv_reg);
kfree(sunhv_port);
sunhv_port = NULL;
}
module_init(sunhv_init);
module_exit(sunhv_exit);
MODULE_AUTHOR("David S. Miller");
MODULE_DESCRIPTION("SUN4V Hypervisor console driver")
MODULE_LICENSE("GPL");