0c9938cc75
Implemented support to ignore an attempt to install/load a particular ACPI table more than once. Apparently there exists BIOS code that repeatedly attempts to load the same SSDT upon certain events. Thanks to Venkatesh Pallipadi. Restructured the main interface to the AML parser in order to correctly handle all exceptional conditions. This will prevent leakage of the OwnerId resource and should eliminate the AE_OWNER_ID_LIMIT exceptions seen on some machines. Thanks to Alexey Starikovskiy. Support for "module level code" has been disabled in this version due to a number of issues that have appeared on various machines. The support can be enabled by defining ACPI_ENABLE_MODULE_LEVEL_CODE during subsystem compilation. When the issues are fully resolved, the code will be enabled by default again. Modified the internal functions for debug print support to define the FunctionName parameter as a (const char *) for compatibility with compiler built-in macros such as __FUNCTION__, etc. Linted the entire ACPICA source tree for both 32-bit and 64-bit. Signed-off-by: Robert Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
691 lines
26 KiB
C
691 lines
26 KiB
C
/******************************************************************************
|
|
*
|
|
* Name: acmacros.h - C macros for the entire subsystem.
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/*
|
|
* Copyright (C) 2000 - 2005, R. Byron Moore
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
|
* ("Disclaimer") and any redistribution must be conditioned upon
|
|
* including a substantially similar Disclaimer requirement for further
|
|
* binary redistribution.
|
|
* 3. Neither the names of the above-listed copyright holders nor the names
|
|
* of any contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* NO WARRANTY
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGES.
|
|
*/
|
|
|
|
#ifndef __ACMACROS_H__
|
|
#define __ACMACROS_H__
|
|
|
|
|
|
/*
|
|
* Data manipulation macros
|
|
*/
|
|
#define ACPI_LOWORD(l) ((u16)(u32)(l))
|
|
#define ACPI_HIWORD(l) ((u16)((((u32)(l)) >> 16) & 0xFFFF))
|
|
#define ACPI_LOBYTE(l) ((u8)(u16)(l))
|
|
#define ACPI_HIBYTE(l) ((u8)((((u16)(l)) >> 8) & 0xFF))
|
|
|
|
#define ACPI_SET_BIT(target,bit) ((target) |= (bit))
|
|
#define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit))
|
|
#define ACPI_MIN(a,b) (((a)<(b))?(a):(b))
|
|
|
|
|
|
#if ACPI_MACHINE_WIDTH == 16
|
|
|
|
/*
|
|
* For 16-bit addresses, we have to assume that the upper 32 bits
|
|
* are zero.
|
|
*/
|
|
#define ACPI_LODWORD(l) ((u32)(l))
|
|
#define ACPI_HIDWORD(l) ((u32)(0))
|
|
|
|
#define ACPI_GET_ADDRESS(a) ((a).lo)
|
|
#define ACPI_STORE_ADDRESS(a,b) {(a).hi=0;(a).lo=(u32)(b);}
|
|
#define ACPI_VALID_ADDRESS(a) ((a).hi | (a).lo)
|
|
|
|
#else
|
|
#ifdef ACPI_NO_INTEGER64_SUPPORT
|
|
/*
|
|
* acpi_integer is 32-bits, no 64-bit support on this platform
|
|
*/
|
|
#define ACPI_LODWORD(l) ((u32)(l))
|
|
#define ACPI_HIDWORD(l) ((u32)(0))
|
|
|
|
#define ACPI_GET_ADDRESS(a) (a)
|
|
#define ACPI_STORE_ADDRESS(a,b) ((a)=(b))
|
|
#define ACPI_VALID_ADDRESS(a) (a)
|
|
|
|
#else
|
|
|
|
/*
|
|
* Full 64-bit address/integer on both 32-bit and 64-bit platforms
|
|
*/
|
|
#define ACPI_LODWORD(l) ((u32)(u64)(l))
|
|
#define ACPI_HIDWORD(l) ((u32)(((*(struct uint64_struct *)(void *)(&l))).hi))
|
|
|
|
#define ACPI_GET_ADDRESS(a) (a)
|
|
#define ACPI_STORE_ADDRESS(a,b) ((a)=(acpi_physical_address)(b))
|
|
#define ACPI_VALID_ADDRESS(a) (a)
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* printf() format helpers
|
|
*/
|
|
|
|
/* Split 64-bit integer into two 32-bit values. Use with %8.8X%8.8X */
|
|
|
|
#define ACPI_FORMAT_UINT64(i) ACPI_HIDWORD(i),ACPI_LODWORD(i)
|
|
|
|
/*
|
|
* Extract a byte of data using a pointer. Any more than a byte and we
|
|
* get into potential aligment issues -- see the STORE macros below
|
|
*/
|
|
#define ACPI_GET8(addr) (*(u8*)(addr))
|
|
|
|
/* Pointer arithmetic */
|
|
|
|
#define ACPI_PTR_ADD(t,a,b) (t *) (void *)((char *)(a) + (acpi_native_uint)(b))
|
|
#define ACPI_PTR_DIFF(a,b) (acpi_native_uint) ((char *)(a) - (char *)(b))
|
|
|
|
/* Pointer/Integer type conversions */
|
|
|
|
#define ACPI_TO_POINTER(i) ACPI_PTR_ADD (void, (void *) NULL,(acpi_native_uint)i)
|
|
#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p,(void *) NULL)
|
|
#define ACPI_OFFSET(d,f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL)
|
|
#define ACPI_FADT_OFFSET(f) ACPI_OFFSET (FADT_DESCRIPTOR, f)
|
|
|
|
#define ACPI_CAST_PTR(t, p) ((t *)(void *)(p))
|
|
#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **)(void *)(p))
|
|
|
|
#if ACPI_MACHINE_WIDTH == 16
|
|
#define ACPI_STORE_POINTER(d,s) ACPI_MOVE_32_TO_32(d,s)
|
|
#define ACPI_PHYSADDR_TO_PTR(i) (void *)(i)
|
|
#define ACPI_PTR_TO_PHYSADDR(i) (u32) (char *)(i)
|
|
#else
|
|
#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i)
|
|
#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i)
|
|
#endif
|
|
|
|
/*
|
|
* Macros for moving data around to/from buffers that are possibly unaligned.
|
|
* If the hardware supports the transfer of unaligned data, just do the store.
|
|
* Otherwise, we have to move one byte at a time.
|
|
*/
|
|
#ifdef ACPI_BIG_ENDIAN
|
|
/*
|
|
* Macros for big-endian machines
|
|
*/
|
|
|
|
/* This macro sets a buffer index, starting from the end of the buffer */
|
|
|
|
#define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) ((buf_len) - (((buf_offset)+1) * (byte_gran)))
|
|
|
|
/* These macros reverse the bytes during the move, converting little-endian to big endian */
|
|
|
|
/* Big Endian <== Little Endian */
|
|
/* Hi...Lo Lo...Hi */
|
|
/* 16-bit source, 16/32/64 destination */
|
|
|
|
#define ACPI_MOVE_16_TO_16(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\
|
|
(( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];}
|
|
|
|
#define ACPI_MOVE_16_TO_32(d,s) {(*(u32 *)(void *)(d))=0;\
|
|
((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
|
|
((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
|
|
|
|
#define ACPI_MOVE_16_TO_64(d,s) {(*(u64 *)(void *)(d))=0;\
|
|
((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
|
|
((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
|
|
|
|
/* 32-bit source, 16/32/64 destination */
|
|
|
|
#define ACPI_MOVE_32_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
|
|
|
|
#define ACPI_MOVE_32_TO_32(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\
|
|
(( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\
|
|
(( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
|
|
(( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
|
|
|
|
#define ACPI_MOVE_32_TO_64(d,s) {(*(u64 *)(void *)(d))=0;\
|
|
((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
|
|
((u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
|
|
((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
|
|
((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
|
|
|
|
/* 64-bit source, 16/32/64 destination */
|
|
|
|
#define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
|
|
|
|
#define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
|
|
|
|
#define ACPI_MOVE_64_TO_64(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[7];\
|
|
(( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[6];\
|
|
(( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[5];\
|
|
(( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[4];\
|
|
(( u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
|
|
(( u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
|
|
(( u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
|
|
(( u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
|
|
#else
|
|
/*
|
|
* Macros for little-endian machines
|
|
*/
|
|
|
|
/* This macro sets a buffer index, starting from the beginning of the buffer */
|
|
|
|
#define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) (buf_offset)
|
|
|
|
#ifdef ACPI_MISALIGNED_TRANSFERS
|
|
|
|
/* The hardware supports unaligned transfers, just do the little-endian move */
|
|
|
|
#if ACPI_MACHINE_WIDTH == 16
|
|
|
|
/* No 64-bit integers */
|
|
/* 16-bit source, 16/32/64 destination */
|
|
|
|
#define ACPI_MOVE_16_TO_16(d,s) *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
|
|
#define ACPI_MOVE_16_TO_32(d,s) *(u32 *)(void *)(d) = *(u16 *)(void *)(s)
|
|
#define ACPI_MOVE_16_TO_64(d,s) ACPI_MOVE_16_TO_32(d,s)
|
|
|
|
/* 32-bit source, 16/32/64 destination */
|
|
|
|
#define ACPI_MOVE_32_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
|
|
#define ACPI_MOVE_32_TO_32(d,s) *(u32 *)(void *)(d) = *(u32 *)(void *)(s)
|
|
#define ACPI_MOVE_32_TO_64(d,s) ACPI_MOVE_32_TO_32(d,s)
|
|
|
|
/* 64-bit source, 16/32/64 destination */
|
|
|
|
#define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
|
|
#define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
|
|
#define ACPI_MOVE_64_TO_64(d,s) ACPI_MOVE_32_TO_32(d,s)
|
|
|
|
#else
|
|
/* 16-bit source, 16/32/64 destination */
|
|
|
|
#define ACPI_MOVE_16_TO_16(d,s) *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
|
|
#define ACPI_MOVE_16_TO_32(d,s) *(u32 *)(void *)(d) = *(u16 *)(void *)(s)
|
|
#define ACPI_MOVE_16_TO_64(d,s) *(u64 *)(void *)(d) = *(u16 *)(void *)(s)
|
|
|
|
/* 32-bit source, 16/32/64 destination */
|
|
|
|
#define ACPI_MOVE_32_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
|
|
#define ACPI_MOVE_32_TO_32(d,s) *(u32 *)(void *)(d) = *(u32 *)(void *)(s)
|
|
#define ACPI_MOVE_32_TO_64(d,s) *(u64 *)(void *)(d) = *(u32 *)(void *)(s)
|
|
|
|
/* 64-bit source, 16/32/64 destination */
|
|
|
|
#define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
|
|
#define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
|
|
#define ACPI_MOVE_64_TO_64(d,s) *(u64 *)(void *)(d) = *(u64 *)(void *)(s)
|
|
#endif
|
|
|
|
#else
|
|
/*
|
|
* The hardware does not support unaligned transfers. We must move the
|
|
* data one byte at a time. These macros work whether the source or
|
|
* the destination (or both) is/are unaligned. (Little-endian move)
|
|
*/
|
|
|
|
/* 16-bit source, 16/32/64 destination */
|
|
|
|
#define ACPI_MOVE_16_TO_16(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
|
|
(( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];}
|
|
|
|
#define ACPI_MOVE_16_TO_32(d,s) {(*(u32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
|
|
#define ACPI_MOVE_16_TO_64(d,s) {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
|
|
|
|
/* 32-bit source, 16/32/64 destination */
|
|
|
|
#define ACPI_MOVE_32_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
|
|
|
|
#define ACPI_MOVE_32_TO_32(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
|
|
(( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
|
|
(( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
|
|
(( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];}
|
|
|
|
#define ACPI_MOVE_32_TO_64(d,s) {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d,s);}
|
|
|
|
/* 64-bit source, 16/32/64 destination */
|
|
|
|
#define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
|
|
#define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
|
|
#define ACPI_MOVE_64_TO_64(d,s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
|
|
(( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
|
|
(( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
|
|
(( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];\
|
|
(( u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[4];\
|
|
(( u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[5];\
|
|
(( u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[6];\
|
|
(( u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[7];}
|
|
#endif
|
|
#endif
|
|
|
|
/* Macros based on machine integer width */
|
|
|
|
#if ACPI_MACHINE_WIDTH == 16
|
|
#define ACPI_MOVE_SIZE_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s)
|
|
|
|
#elif ACPI_MACHINE_WIDTH == 32
|
|
#define ACPI_MOVE_SIZE_TO_16(d,s) ACPI_MOVE_32_TO_16(d,s)
|
|
|
|
#elif ACPI_MACHINE_WIDTH == 64
|
|
#define ACPI_MOVE_SIZE_TO_16(d,s) ACPI_MOVE_64_TO_16(d,s)
|
|
|
|
#else
|
|
#error unknown ACPI_MACHINE_WIDTH
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Fast power-of-two math macros for non-optimized compilers
|
|
*/
|
|
#define _ACPI_DIV(value,power_of2) ((u32) ((value) >> (power_of2)))
|
|
#define _ACPI_MUL(value,power_of2) ((u32) ((value) << (power_of2)))
|
|
#define _ACPI_MOD(value,divisor) ((u32) ((value) & ((divisor) -1)))
|
|
|
|
#define ACPI_DIV_2(a) _ACPI_DIV(a,1)
|
|
#define ACPI_MUL_2(a) _ACPI_MUL(a,1)
|
|
#define ACPI_MOD_2(a) _ACPI_MOD(a,2)
|
|
|
|
#define ACPI_DIV_4(a) _ACPI_DIV(a,2)
|
|
#define ACPI_MUL_4(a) _ACPI_MUL(a,2)
|
|
#define ACPI_MOD_4(a) _ACPI_MOD(a,4)
|
|
|
|
#define ACPI_DIV_8(a) _ACPI_DIV(a,3)
|
|
#define ACPI_MUL_8(a) _ACPI_MUL(a,3)
|
|
#define ACPI_MOD_8(a) _ACPI_MOD(a,8)
|
|
|
|
#define ACPI_DIV_16(a) _ACPI_DIV(a,4)
|
|
#define ACPI_MUL_16(a) _ACPI_MUL(a,4)
|
|
#define ACPI_MOD_16(a) _ACPI_MOD(a,16)
|
|
|
|
|
|
/*
|
|
* Rounding macros (Power of two boundaries only)
|
|
*/
|
|
#define ACPI_ROUND_DOWN(value,boundary) (((acpi_native_uint)(value)) & (~(((acpi_native_uint) boundary)-1)))
|
|
#define ACPI_ROUND_UP(value,boundary) ((((acpi_native_uint)(value)) + (((acpi_native_uint) boundary)-1)) & (~(((acpi_native_uint) boundary)-1)))
|
|
|
|
#define ACPI_ROUND_DOWN_TO_32_BITS(a) ACPI_ROUND_DOWN(a,4)
|
|
#define ACPI_ROUND_DOWN_TO_64_BITS(a) ACPI_ROUND_DOWN(a,8)
|
|
#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a) ACPI_ROUND_DOWN(a,ALIGNED_ADDRESS_BOUNDARY)
|
|
|
|
#define ACPI_ROUND_UP_to_32_bITS(a) ACPI_ROUND_UP(a,4)
|
|
#define ACPI_ROUND_UP_to_64_bITS(a) ACPI_ROUND_UP(a,8)
|
|
#define ACPI_ROUND_UP_TO_NATIVE_WORD(a) ACPI_ROUND_UP(a,ALIGNED_ADDRESS_BOUNDARY)
|
|
|
|
|
|
#define ACPI_ROUND_BITS_UP_TO_BYTES(a) ACPI_DIV_8((a) + 7)
|
|
#define ACPI_ROUND_BITS_DOWN_TO_BYTES(a) ACPI_DIV_8((a))
|
|
|
|
#define ACPI_ROUND_UP_TO_1K(a) (((a) + 1023) >> 10)
|
|
|
|
/* Generic (non-power-of-two) rounding */
|
|
|
|
#define ACPI_ROUND_UP_TO(value,boundary) (((value) + ((boundary)-1)) / (boundary))
|
|
|
|
/*
|
|
* Bitmask creation
|
|
* Bit positions start at zero.
|
|
* MASK_BITS_ABOVE creates a mask starting AT the position and above
|
|
* MASK_BITS_BELOW creates a mask starting one bit BELOW the position
|
|
*/
|
|
#define ACPI_MASK_BITS_ABOVE(position) (~((ACPI_INTEGER_MAX) << ((u32) (position))))
|
|
#define ACPI_MASK_BITS_BELOW(position) ((ACPI_INTEGER_MAX) << ((u32) (position)))
|
|
|
|
#define ACPI_IS_OCTAL_DIGIT(d) (((char)(d) >= '0') && ((char)(d) <= '7'))
|
|
|
|
|
|
/* Bitfields within ACPI registers */
|
|
|
|
#define ACPI_REGISTER_PREPARE_BITS(val, pos, mask) ((val << pos) & mask)
|
|
#define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val) reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask)
|
|
|
|
/*
|
|
* An struct acpi_namespace_node * can appear in some contexts,
|
|
* where a pointer to an union acpi_operand_object can also
|
|
* appear. This macro is used to distinguish them.
|
|
*
|
|
* The "Descriptor" field is the first field in both structures.
|
|
*/
|
|
#define ACPI_GET_DESCRIPTOR_TYPE(d) (((union acpi_descriptor *)(void *)(d))->descriptor_id)
|
|
#define ACPI_SET_DESCRIPTOR_TYPE(d,t) (((union acpi_descriptor *)(void *)(d))->descriptor_id = t)
|
|
|
|
|
|
/* Macro to test the object type */
|
|
|
|
#define ACPI_GET_OBJECT_TYPE(d) (((union acpi_operand_object *)(void *)(d))->common.type)
|
|
|
|
/* Macro to check the table flags for SINGLE or MULTIPLE tables are allowed */
|
|
|
|
#define ACPI_IS_SINGLE_TABLE(x) (((x) & 0x01) == ACPI_TABLE_SINGLE ? 1 : 0)
|
|
|
|
/*
|
|
* Macros for the master AML opcode table
|
|
*/
|
|
#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT)
|
|
#define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags) {name,(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
|
|
#else
|
|
#define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags) {(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
|
|
#endif
|
|
|
|
#ifdef ACPI_DISASSEMBLER
|
|
#define ACPI_DISASM_ONLY_MEMBERS(a) a;
|
|
#else
|
|
#define ACPI_DISASM_ONLY_MEMBERS(a)
|
|
#endif
|
|
|
|
#define ARG_TYPE_WIDTH 5
|
|
#define ARG_1(x) ((u32)(x))
|
|
#define ARG_2(x) ((u32)(x) << (1 * ARG_TYPE_WIDTH))
|
|
#define ARG_3(x) ((u32)(x) << (2 * ARG_TYPE_WIDTH))
|
|
#define ARG_4(x) ((u32)(x) << (3 * ARG_TYPE_WIDTH))
|
|
#define ARG_5(x) ((u32)(x) << (4 * ARG_TYPE_WIDTH))
|
|
#define ARG_6(x) ((u32)(x) << (5 * ARG_TYPE_WIDTH))
|
|
|
|
#define ARGI_LIST1(a) (ARG_1(a))
|
|
#define ARGI_LIST2(a,b) (ARG_1(b)|ARG_2(a))
|
|
#define ARGI_LIST3(a,b,c) (ARG_1(c)|ARG_2(b)|ARG_3(a))
|
|
#define ARGI_LIST4(a,b,c,d) (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a))
|
|
#define ARGI_LIST5(a,b,c,d,e) (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a))
|
|
#define ARGI_LIST6(a,b,c,d,e,f) (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a))
|
|
|
|
#define ARGP_LIST1(a) (ARG_1(a))
|
|
#define ARGP_LIST2(a,b) (ARG_1(a)|ARG_2(b))
|
|
#define ARGP_LIST3(a,b,c) (ARG_1(a)|ARG_2(b)|ARG_3(c))
|
|
#define ARGP_LIST4(a,b,c,d) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d))
|
|
#define ARGP_LIST5(a,b,c,d,e) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e))
|
|
#define ARGP_LIST6(a,b,c,d,e,f) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f))
|
|
|
|
#define GET_CURRENT_ARG_TYPE(list) (list & ((u32) 0x1F))
|
|
#define INCREMENT_ARG_LIST(list) (list >>= ((u32) ARG_TYPE_WIDTH))
|
|
|
|
|
|
/*
|
|
* Reporting macros that are never compiled out
|
|
*/
|
|
#define ACPI_PARAM_LIST(pl) pl
|
|
|
|
/*
|
|
* Error reporting. These versions add callers module and line#.
|
|
*
|
|
* Since _acpi_module_name gets compiled out when ACPI_DEBUG_OUTPUT
|
|
* isn't defined, only use it in debug mode.
|
|
*/
|
|
#ifdef ACPI_DEBUG_OUTPUT
|
|
|
|
#define ACPI_REPORT_INFO(fp) {acpi_ut_report_info(_acpi_module_name,__LINE__,_COMPONENT); \
|
|
acpi_os_printf ACPI_PARAM_LIST(fp);}
|
|
#define ACPI_REPORT_ERROR(fp) {acpi_ut_report_error(_acpi_module_name,__LINE__,_COMPONENT); \
|
|
acpi_os_printf ACPI_PARAM_LIST(fp);}
|
|
#define ACPI_REPORT_WARNING(fp) {acpi_ut_report_warning(_acpi_module_name,__LINE__,_COMPONENT); \
|
|
acpi_os_printf ACPI_PARAM_LIST(fp);}
|
|
#define ACPI_REPORT_NSERROR(s,e) acpi_ns_report_error(_acpi_module_name,__LINE__,_COMPONENT, s, e);
|
|
|
|
#define ACPI_REPORT_METHOD_ERROR(s,n,p,e) acpi_ns_report_method_error(_acpi_module_name,__LINE__,_COMPONENT, s, n, p, e);
|
|
|
|
#else
|
|
|
|
#define ACPI_REPORT_INFO(fp) {acpi_ut_report_info("ACPI",__LINE__,_COMPONENT); \
|
|
acpi_os_printf ACPI_PARAM_LIST(fp);}
|
|
#define ACPI_REPORT_ERROR(fp) {acpi_ut_report_error("ACPI",__LINE__,_COMPONENT); \
|
|
acpi_os_printf ACPI_PARAM_LIST(fp);}
|
|
#define ACPI_REPORT_WARNING(fp) {acpi_ut_report_warning("ACPI",__LINE__,_COMPONENT); \
|
|
acpi_os_printf ACPI_PARAM_LIST(fp);}
|
|
#define ACPI_REPORT_NSERROR(s,e) acpi_ns_report_error("ACPI",__LINE__,_COMPONENT, s, e);
|
|
|
|
#define ACPI_REPORT_METHOD_ERROR(s,n,p,e) acpi_ns_report_method_error("ACPI",__LINE__,_COMPONENT, s, n, p, e);
|
|
|
|
#endif
|
|
|
|
/* Error reporting. These versions pass thru the module and line# */
|
|
|
|
#define _ACPI_REPORT_INFO(a,b,c,fp) {acpi_ut_report_info(a,b,c); \
|
|
acpi_os_printf ACPI_PARAM_LIST(fp);}
|
|
#define _ACPI_REPORT_ERROR(a,b,c,fp) {acpi_ut_report_error(a,b,c); \
|
|
acpi_os_printf ACPI_PARAM_LIST(fp);}
|
|
#define _ACPI_REPORT_WARNING(a,b,c,fp) {acpi_ut_report_warning(a,b,c); \
|
|
acpi_os_printf ACPI_PARAM_LIST(fp);}
|
|
|
|
/*
|
|
* Debug macros that are conditionally compiled
|
|
*/
|
|
#ifdef ACPI_DEBUG_OUTPUT
|
|
#define ACPI_MODULE_NAME(name) static char ACPI_UNUSED_VAR *_acpi_module_name = name;
|
|
|
|
/*
|
|
* Common parameters used for debug output functions:
|
|
* line number, function name, module(file) name, component ID
|
|
*/
|
|
#define ACPI_DEBUG_PARAMETERS __LINE__, ACPI_GET_FUNCTION_NAME, _acpi_module_name, _COMPONENT
|
|
|
|
/*
|
|
* Function entry tracing
|
|
*/
|
|
|
|
/*
|
|
* If ACPI_GET_FUNCTION_NAME was not defined in the compiler-dependent header,
|
|
* define it now. This is the case where there the compiler does not support
|
|
* a __FUNCTION__ macro or equivalent. We save the function name on the
|
|
* local stack.
|
|
*/
|
|
#ifndef ACPI_GET_FUNCTION_NAME
|
|
#define ACPI_GET_FUNCTION_NAME _acpi_function_name
|
|
/*
|
|
* The Name parameter should be the procedure name as a quoted string.
|
|
* This is declared as a local string ("my_function_name") so that it can
|
|
* be also used by the function exit macros below.
|
|
* Note: (const char) is used to be compatible with the debug interfaces
|
|
* and macros such as __FUNCTION__.
|
|
*/
|
|
#define ACPI_FUNCTION_NAME(name) const char *_acpi_function_name = name;
|
|
|
|
#else
|
|
/* Compiler supports __FUNCTION__ (or equivalent) -- Ignore this macro */
|
|
|
|
#define ACPI_FUNCTION_NAME(name)
|
|
#endif
|
|
|
|
#define ACPI_FUNCTION_TRACE(a) ACPI_FUNCTION_NAME(a) \
|
|
acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
|
|
#define ACPI_FUNCTION_TRACE_PTR(a,b) ACPI_FUNCTION_NAME(a) \
|
|
acpi_ut_trace_ptr(ACPI_DEBUG_PARAMETERS,(void *)b)
|
|
#define ACPI_FUNCTION_TRACE_U32(a,b) ACPI_FUNCTION_NAME(a) \
|
|
acpi_ut_trace_u32(ACPI_DEBUG_PARAMETERS,(u32)b)
|
|
#define ACPI_FUNCTION_TRACE_STR(a,b) ACPI_FUNCTION_NAME(a) \
|
|
acpi_ut_trace_str(ACPI_DEBUG_PARAMETERS,(char *)b)
|
|
|
|
#define ACPI_FUNCTION_ENTRY() acpi_ut_track_stack_ptr()
|
|
|
|
/*
|
|
* Function exit tracing.
|
|
* WARNING: These macros include a return statement. This is usually considered
|
|
* bad form, but having a separate exit macro is very ugly and difficult to maintain.
|
|
* One of the FUNCTION_TRACE macros above must be used in conjunction with these macros
|
|
* so that "_acpi_function_name" is defined.
|
|
*/
|
|
#ifdef ACPI_USE_DO_WHILE_0
|
|
#define ACPI_DO_WHILE0(a) do a while(0)
|
|
#else
|
|
#define ACPI_DO_WHILE0(a) a
|
|
#endif
|
|
|
|
#define return_VOID ACPI_DO_WHILE0 ({acpi_ut_exit(ACPI_DEBUG_PARAMETERS);return;})
|
|
#define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({acpi_ut_status_exit(ACPI_DEBUG_PARAMETERS,(s));return((s));})
|
|
#define return_VALUE(s) ACPI_DO_WHILE0 ({acpi_ut_value_exit(ACPI_DEBUG_PARAMETERS,(acpi_integer)(s));return((s));})
|
|
#define return_PTR(s) ACPI_DO_WHILE0 ({acpi_ut_ptr_exit(ACPI_DEBUG_PARAMETERS,(u8 *)(s));return((s));})
|
|
|
|
/* Conditional execution */
|
|
|
|
#define ACPI_DEBUG_EXEC(a) a
|
|
#define ACPI_NORMAL_EXEC(a)
|
|
|
|
#define ACPI_DEBUG_DEFINE(a) a;
|
|
#define ACPI_DEBUG_ONLY_MEMBERS(a) a;
|
|
#define _VERBOSE_STRUCTURES
|
|
|
|
|
|
/* Stack and buffer dumping */
|
|
|
|
#define ACPI_DUMP_STACK_ENTRY(a) acpi_ex_dump_operand((a),0)
|
|
#define ACPI_DUMP_OPERANDS(a,b,c,d,e) acpi_ex_dump_operands(a,b,c,d,e,_acpi_module_name,__LINE__)
|
|
|
|
|
|
#define ACPI_DUMP_ENTRY(a,b) acpi_ns_dump_entry (a,b)
|
|
#define ACPI_DUMP_PATHNAME(a,b,c,d) acpi_ns_dump_pathname(a,b,c,d)
|
|
#define ACPI_DUMP_RESOURCE_LIST(a) acpi_rs_dump_resource_list(a)
|
|
#define ACPI_DUMP_BUFFER(a,b) acpi_ut_dump_buffer((u8 *)a,b,DB_BYTE_DISPLAY,_COMPONENT)
|
|
#define ACPI_BREAK_MSG(a) acpi_os_signal (ACPI_SIGNAL_BREAKPOINT,(a))
|
|
|
|
|
|
/*
|
|
* Generate INT3 on ACPI_ERROR (Debug only!)
|
|
*/
|
|
#define ACPI_ERROR_BREAK
|
|
#ifdef ACPI_ERROR_BREAK
|
|
#define ACPI_BREAK_ON_ERROR(lvl) if ((lvl)&ACPI_ERROR) \
|
|
acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,"Fatal error encountered\n")
|
|
#else
|
|
#define ACPI_BREAK_ON_ERROR(lvl)
|
|
#endif
|
|
|
|
/*
|
|
* Master debug print macros
|
|
* Print iff:
|
|
* 1) Debug print for the current component is enabled
|
|
* 2) Debug error level or trace level for the print statement is enabled
|
|
*/
|
|
#define ACPI_DEBUG_PRINT(pl) acpi_ut_debug_print ACPI_PARAM_LIST(pl)
|
|
#define ACPI_DEBUG_PRINT_RAW(pl) acpi_ut_debug_print_raw ACPI_PARAM_LIST(pl)
|
|
|
|
|
|
#else
|
|
/*
|
|
* This is the non-debug case -- make everything go away,
|
|
* leaving no executable debug code!
|
|
*/
|
|
#define ACPI_MODULE_NAME(name)
|
|
#define _acpi_module_name ""
|
|
|
|
#define ACPI_DEBUG_EXEC(a)
|
|
#define ACPI_NORMAL_EXEC(a) a;
|
|
|
|
#define ACPI_DEBUG_DEFINE(a)
|
|
#define ACPI_DEBUG_ONLY_MEMBERS(a)
|
|
#define ACPI_FUNCTION_NAME(a)
|
|
#define ACPI_FUNCTION_TRACE(a)
|
|
#define ACPI_FUNCTION_TRACE_PTR(a,b)
|
|
#define ACPI_FUNCTION_TRACE_U32(a,b)
|
|
#define ACPI_FUNCTION_TRACE_STR(a,b)
|
|
#define ACPI_FUNCTION_EXIT
|
|
#define ACPI_FUNCTION_STATUS_EXIT(s)
|
|
#define ACPI_FUNCTION_VALUE_EXIT(s)
|
|
#define ACPI_FUNCTION_ENTRY()
|
|
#define ACPI_DUMP_STACK_ENTRY(a)
|
|
#define ACPI_DUMP_OPERANDS(a,b,c,d,e)
|
|
#define ACPI_DUMP_ENTRY(a,b)
|
|
#define ACPI_DUMP_PATHNAME(a,b,c,d)
|
|
#define ACPI_DUMP_RESOURCE_LIST(a)
|
|
#define ACPI_DUMP_BUFFER(a,b)
|
|
#define ACPI_DEBUG_PRINT(pl)
|
|
#define ACPI_DEBUG_PRINT_RAW(pl)
|
|
#define ACPI_BREAK_MSG(a)
|
|
|
|
#define return_VOID return
|
|
#define return_ACPI_STATUS(s) return(s)
|
|
#define return_VALUE(s) return(s)
|
|
#define return_PTR(s) return(s)
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Some code only gets executed when the debugger is built in.
|
|
* Note that this is entirely independent of whether the
|
|
* DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not.
|
|
*/
|
|
#ifdef ACPI_DEBUGGER
|
|
#define ACPI_DEBUGGER_EXEC(a) a
|
|
#else
|
|
#define ACPI_DEBUGGER_EXEC(a)
|
|
#endif
|
|
|
|
|
|
/*
|
|
* For 16-bit code, we want to shrink some things even though
|
|
* we are using ACPI_DEBUG_OUTPUT to get the debug output
|
|
*/
|
|
#if ACPI_MACHINE_WIDTH == 16
|
|
#undef ACPI_DEBUG_ONLY_MEMBERS
|
|
#undef _VERBOSE_STRUCTURES
|
|
#define ACPI_DEBUG_ONLY_MEMBERS(a)
|
|
#endif
|
|
|
|
|
|
#ifdef ACPI_DEBUG_OUTPUT
|
|
/*
|
|
* 1) Set name to blanks
|
|
* 2) Copy the object name
|
|
*/
|
|
#define ACPI_ADD_OBJECT_NAME(a,b) ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\
|
|
ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name))
|
|
#else
|
|
|
|
#define ACPI_ADD_OBJECT_NAME(a,b)
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Memory allocation tracking (DEBUG ONLY)
|
|
*/
|
|
#ifndef ACPI_DBG_TRACK_ALLOCATIONS
|
|
|
|
/* Memory allocation */
|
|
|
|
#define ACPI_MEM_ALLOCATE(a) acpi_ut_allocate((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
|
|
#define ACPI_MEM_CALLOCATE(a) acpi_ut_callocate((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
|
|
#define ACPI_MEM_FREE(a) acpi_os_free(a)
|
|
#define ACPI_MEM_TRACKING(a)
|
|
|
|
#else
|
|
|
|
/* Memory allocation */
|
|
|
|
#define ACPI_MEM_ALLOCATE(a) acpi_ut_allocate_and_track((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
|
|
#define ACPI_MEM_CALLOCATE(a) acpi_ut_callocate_and_track((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
|
|
#define ACPI_MEM_FREE(a) acpi_ut_free_and_track(a,_COMPONENT,_acpi_module_name,__LINE__)
|
|
#define ACPI_MEM_TRACKING(a) a
|
|
|
|
#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
|
|
|
|
#endif /* ACMACROS_H */
|