/* * Copyright 2003-2004 Red Hat, Inc. All rights reserved. * Copyright 2003-2004 Jeff Garzik * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. * * * libata documentation is available via 'make {ps|pdf}docs', * as Documentation/DocBook/libata.* * * Hardware documentation available from http://www.t13.org/ * */ #ifndef __LINUX_ATA_H__ #define __LINUX_ATA_H__ #include /* defines only for the constants which don't work well as enums */ #define ATA_DMA_BOUNDARY 0xffffUL #define ATA_DMA_MASK 0xffffffffULL enum { /* various global constants */ ATA_MAX_DEVICES = 2, /* per bus/port */ ATA_MAX_PRD = 256, /* we could make these 256/256 */ ATA_SECT_SIZE = 512, ATA_ID_WORDS = 256, ATA_ID_SERNO_OFS = 10, ATA_ID_FW_REV_OFS = 23, ATA_ID_PROD_OFS = 27, ATA_ID_OLD_PIO_MODES = 51, ATA_ID_FIELD_VALID = 53, ATA_ID_MWDMA_MODES = 63, ATA_ID_PIO_MODES = 64, ATA_ID_EIDE_DMA_MIN = 65, ATA_ID_EIDE_PIO = 67, ATA_ID_EIDE_PIO_IORDY = 68, ATA_ID_UDMA_MODES = 88, ATA_ID_MAJOR_VER = 80, ATA_ID_PIO4 = (1 << 1), ATA_PCI_CTL_OFS = 2, ATA_SERNO_LEN = 20, ATA_UDMA0 = (1 << 0), ATA_UDMA1 = ATA_UDMA0 | (1 << 1), ATA_UDMA2 = ATA_UDMA1 | (1 << 2), ATA_UDMA3 = ATA_UDMA2 | (1 << 3), ATA_UDMA4 = ATA_UDMA3 | (1 << 4), ATA_UDMA5 = ATA_UDMA4 | (1 << 5), ATA_UDMA6 = ATA_UDMA5 | (1 << 6), ATA_UDMA7 = ATA_UDMA6 | (1 << 7), /* ATA_UDMA7 is just for completeness... doesn't exist (yet?). */ ATA_UDMA_MASK_40C = ATA_UDMA2, /* udma0-2 */ /* DMA-related */ ATA_PRD_SZ = 8, ATA_PRD_TBL_SZ = (ATA_MAX_PRD * ATA_PRD_SZ), ATA_PRD_EOT = (1 << 31), /* end-of-table flag */ ATA_DMA_TABLE_OFS = 4, ATA_DMA_STATUS = 2, ATA_DMA_CMD = 0, ATA_DMA_WR = (1 << 3), ATA_DMA_START = (1 << 0), ATA_DMA_INTR = (1 << 2), ATA_DMA_ERR = (1 << 1), ATA_DMA_ACTIVE = (1 << 0), /* bits in ATA command block registers */ ATA_HOB = (1 << 7), /* LBA48 selector */ ATA_NIEN = (1 << 1), /* disable-irq flag */ ATA_LBA = (1 << 6), /* LBA28 selector */ ATA_DEV1 = (1 << 4), /* Select Device 1 (slave) */ ATA_DEVICE_OBS = (1 << 7) | (1 << 5), /* obs bits in dev reg */ ATA_DEVCTL_OBS = (1 << 3), /* obsolete bit in devctl reg */ ATA_BUSY = (1 << 7), /* BSY status bit */ ATA_DRDY = (1 << 6), /* device ready */ ATA_DF = (1 << 5), /* device fault */ ATA_DRQ = (1 << 3), /* data request i/o */ ATA_ERR = (1 << 0), /* have an error */ ATA_SRST = (1 << 2), /* software reset */ ATA_ABORTED = (1 << 2), /* command aborted */ /* ATA command block registers */ ATA_REG_DATA = 0x00, ATA_REG_ERR = 0x01, ATA_REG_NSECT = 0x02, ATA_REG_LBAL = 0x03, ATA_REG_LBAM = 0x04, ATA_REG_LBAH = 0x05, ATA_REG_DEVICE = 0x06, ATA_REG_STATUS = 0x07, ATA_REG_FEATURE = ATA_REG_ERR, /* and their aliases */ ATA_REG_CMD = ATA_REG_STATUS, ATA_REG_BYTEL = ATA_REG_LBAM, ATA_REG_BYTEH = ATA_REG_LBAH, ATA_REG_DEVSEL = ATA_REG_DEVICE, ATA_REG_IRQ = ATA_REG_NSECT, /* ATA device commands */ ATA_CMD_CHK_POWER = 0xE5, /* check power mode */ ATA_CMD_STANDBY = 0xE2, /* place in standby power mode */ ATA_CMD_IDLE = 0xE3, /* place in idle power mode */ ATA_CMD_EDD = 0x90, /* execute device diagnostic */ ATA_CMD_FLUSH = 0xE7, ATA_CMD_FLUSH_EXT = 0xEA, ATA_CMD_ID_ATA = 0xEC, ATA_CMD_ID_ATAPI = 0xA1, ATA_CMD_READ = 0xC8, ATA_CMD_READ_EXT = 0x25, ATA_CMD_WRITE = 0xCA, ATA_CMD_WRITE_EXT = 0x35, ATA_CMD_PIO_READ = 0x20, ATA_CMD_PIO_READ_EXT = 0x24, ATA_CMD_PIO_WRITE = 0x30, ATA_CMD_PIO_WRITE_EXT = 0x34, ATA_CMD_READ_MULTI = 0xC4, ATA_CMD_READ_MULTI_EXT = 0x29, ATA_CMD_WRITE_MULTI = 0xC5, ATA_CMD_WRITE_MULTI_EXT = 0x39, ATA_CMD_SET_FEATURES = 0xEF, ATA_CMD_PACKET = 0xA0, ATA_CMD_VERIFY = 0x40, ATA_CMD_VERIFY_EXT = 0x42, ATA_CMD_INIT_DEV_PARAMS = 0x91, /* SETFEATURES stuff */ SETFEATURES_XFER = 0x03, XFER_UDMA_7 = 0x47, XFER_UDMA_6 = 0x46, XFER_UDMA_5 = 0x45, XFER_UDMA_4 = 0x44, XFER_UDMA_3 = 0x43, XFER_UDMA_2 = 0x42, XFER_UDMA_1 = 0x41, XFER_UDMA_0 = 0x40, XFER_MW_DMA_2 = 0x22, XFER_MW_DMA_1 = 0x21, XFER_MW_DMA_0 = 0x20, XFER_SW_DMA_2 = 0x12, XFER_SW_DMA_1 = 0x11, XFER_SW_DMA_0 = 0x10, XFER_PIO_4 = 0x0C, XFER_PIO_3 = 0x0B, XFER_PIO_2 = 0x0A, XFER_PIO_1 = 0x09, XFER_PIO_0 = 0x08, XFER_PIO_SLOW = 0x00, /* ATAPI stuff */ ATAPI_PKT_DMA = (1 << 0), ATAPI_DMADIR = (1 << 2), /* ATAPI data dir: 0=to device, 1=to host */ ATAPI_CDB_LEN = 16, /* cable types */ ATA_CBL_NONE = 0, ATA_CBL_PATA40 = 1, ATA_CBL_PATA80 = 2, ATA_CBL_PATA_UNK = 3, ATA_CBL_SATA = 4, /* SATA Status and Control Registers */ SCR_STATUS = 0, SCR_ERROR = 1, SCR_CONTROL = 2, SCR_ACTIVE = 3, SCR_NOTIFICATION = 4, /* struct ata_taskfile flags */ ATA_TFLAG_LBA48 = (1 << 0), /* enable 48-bit LBA and "HOB" */ ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */ ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */ ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */ ATA_TFLAG_LBA = (1 << 4), /* enable LBA */ ATA_TFLAG_POLLING = (1 << 5), /* set nIEN to 1 and use polling */ }; enum ata_tf_protocols { /* ATA taskfile protocols */ ATA_PROT_UNKNOWN, /* unknown/invalid */ ATA_PROT_NODATA, /* no data */ ATA_PROT_PIO, /* PIO single sector */ ATA_PROT_PIO_MULT, /* PIO multiple sector */ ATA_PROT_DMA, /* DMA */ ATA_PROT_ATAPI, /* packet command, PIO data xfer*/ ATA_PROT_ATAPI_NODATA, /* packet command, no data */ ATA_PROT_ATAPI_DMA, /* packet command with special DMA sauce */ }; enum ata_ioctls { ATA_IOC_GET_IO32 = 0x309, ATA_IOC_SET_IO32 = 0x324, }; /* core structures */ struct ata_prd { u32 addr; u32 flags_len; }; struct ata_taskfile { unsigned long flags; /* ATA_TFLAG_xxx */ u8 protocol; /* ATA_PROT_xxx */ u8 ctl; /* control reg */ u8 hob_feature; /* additional data */ u8 hob_nsect; /* to support LBA48 */ u8 hob_lbal; u8 hob_lbam; u8 hob_lbah; u8 feature; u8 nsect; u8 lbal; u8 lbam; u8 lbah; u8 device; u8 command; /* IO operation */ }; #define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0) #define ata_id_is_sata(id) ((id)[93] == 0) #define ata_id_rahead_enabled(id) ((id)[85] & (1 << 6)) #define ata_id_wcache_enabled(id) ((id)[85] & (1 << 5)) #define ata_id_has_flush(id) ((id)[83] & (1 << 12)) #define ata_id_has_flush_ext(id) ((id)[83] & (1 << 13)) #define ata_id_has_lba48(id) ((id)[83] & (1 << 10)) #define ata_id_has_wcache(id) ((id)[82] & (1 << 5)) #define ata_id_has_pm(id) ((id)[82] & (1 << 3)) #define ata_id_has_lba(id) ((id)[49] & (1 << 9)) #define ata_id_has_dma(id) ((id)[49] & (1 << 8)) #define ata_id_removeable(id) ((id)[0] & (1 << 7)) #define ata_id_u32(id,n) \ (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)])) #define ata_id_u64(id,n) \ ( ((u64) (id)[(n) + 3] << 48) | \ ((u64) (id)[(n) + 2] << 32) | \ ((u64) (id)[(n) + 1] << 16) | \ ((u64) (id)[(n) + 0]) ) #define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20) static inline int ata_id_current_chs_valid(const u16 *id) { /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command has not been issued to the device then the values of id[54] to id[56] are vendor specific. */ return (id[53] & 0x01) && /* Current translation valid */ id[54] && /* cylinders in current translation */ id[55] && /* heads in current translation */ id[55] <= 16 && id[56]; /* sectors in current translation */ } static inline int atapi_cdb_len(const u16 *dev_id) { u16 tmp = dev_id[0] & 0x3; switch (tmp) { case 0: return 12; case 1: return 16; default: return -1; } } static inline int is_atapi_taskfile(const struct ata_taskfile *tf) { return (tf->protocol == ATA_PROT_ATAPI) || (tf->protocol == ATA_PROT_ATAPI_NODATA) || (tf->protocol == ATA_PROT_ATAPI_DMA); } static inline int ata_ok(u8 status) { return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR)) == ATA_DRDY); } #endif /* __LINUX_ATA_H__ */