Currently, KEXEC_CORE select CRASH_CORE automatically because crash codes
need be built in to avoid compiling error when building kexec code even
though the crash dumping functionality is not enabled. E.g
--------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
---------------------
After splitting out crashkernel reservation code and vmcoreinfo exporting
code, there's only crash related code left in kernel/crash_core.c. Now
move crash related codes from kexec_core.c to crash_core.c and only build it
in when CONFIG_CRASH_DUMP=y.
And also wrap up crash codes inside CONFIG_CRASH_DUMP ifdeffery scope,
or replace inappropriate CONFIG_KEXEC_CORE ifdef with CONFIG_CRASH_DUMP
ifdef in generic kernel files.
With these changes, crash_core codes are abstracted from kexec codes and
can be disabled at all if only kexec reboot feature is wanted.
Link: https://lkml.kernel.org/r/20240124051254.67105-5-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now move the relevant codes into separate files:
kernel/crash_reserve.c, include/linux/crash_reserve.h.
And add config item CRASH_RESERVE to control its enabling.
And also update the old ifdeffery of CONFIG_CRASH_CORE, including of
<linux/crash_core.h> and config item dependency on CRASH_CORE
accordingly.
And also do renaming as follows:
- arch/xxx/kernel/{crash_core.c => vmcore_info.c}
because they are only related to vmcoreinfo exporting on x86, arm64,
riscv.
And also Remove config item CRASH_CORE, and rely on CONFIG_KEXEC_CORE to
decide if build in crash_core.c.
[yang.lee@linux.alibaba.com: remove duplicated include in vmcore_info.c]
Link: https://lkml.kernel.org/r/20240126005744.16561-1-yang.lee@linux.alibaba.com
Link: https://lkml.kernel.org/r/20240124051254.67105-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Split crash out from kexec and clean up related config
items", v3.
Motivation:
=============
Previously, LKP reported a building error. When investigating, it can't
be resolved reasonablly with the present messy kdump config items.
https://lore.kernel.org/oe-kbuild-all/202312182200.Ka7MzifQ-lkp@intel.com/
The kdump (crash dumping) related config items could causes confusions:
Firstly,
CRASH_CORE enables codes including
- crashkernel reservation;
- elfcorehdr updating;
- vmcoreinfo exporting;
- crash hotplug handling;
Now fadump of powerpc, kcore dynamic debugging and kdump all selects
CRASH_CORE, while fadump
- fadump needs crashkernel parsing, vmcoreinfo exporting, and accessing
global variable 'elfcorehdr_addr';
- kcore only needs vmcoreinfo exporting;
- kdump needs all of the current kernel/crash_core.c.
So only enabling PROC_CORE or FA_DUMP will enable CRASH_CORE, this
mislead people that we enable crash dumping, actual it's not.
Secondly,
It's not reasonable to allow KEXEC_CORE select CRASH_CORE.
Because KEXEC_CORE enables codes which allocate control pages, copy
kexec/kdump segments, and prepare for switching. These codes are
shared by both kexec reboot and kdump. We could want kexec reboot,
but disable kdump. In that case, CRASH_CORE should not be selected.
--------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
---------------------
Thirdly,
It's not reasonable to allow CRASH_DUMP select KEXEC_CORE.
That could make KEXEC_CORE, CRASH_DUMP are enabled independently from
KEXEC or KEXEC_FILE. However, w/o KEXEC or KEXEC_FILE, the KEXEC_CORE
code built in doesn't make any sense because no kernel loading or
switching will happen to utilize the KEXEC_CORE code.
---------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
---------------------
In this case, what is worse, on arch sh and arm, KEXEC relies on MMU,
while CRASH_DUMP can still be enabled when !MMU, then compiling error is
seen as the lkp test robot reported in above link.
------arch/sh/Kconfig------
config ARCH_SUPPORTS_KEXEC
def_bool MMU
config ARCH_SUPPORTS_CRASH_DUMP
def_bool BROKEN_ON_SMP
---------------------------
Changes:
===========
1, split out crash_reserve.c from crash_core.c;
2, split out vmcore_infoc. from crash_core.c;
3, move crash related codes in kexec_core.c into crash_core.c;
4, remove dependency of FA_DUMP on CRASH_DUMP;
5, clean up kdump related config items;
6, wrap up crash codes in crash related ifdefs on all 8 arch-es
which support crash dumping, except of ppc;
Achievement:
===========
With above changes, I can rearrange the config item logic as below (the right
item depends on or is selected by the left item):
PROC_KCORE -----------> VMCORE_INFO
|----------> VMCORE_INFO
FA_DUMP----|
|----------> CRASH_RESERVE
---->VMCORE_INFO
/
|---->CRASH_RESERVE
KEXEC --| /|
|--> KEXEC_CORE--> CRASH_DUMP-->/-|---->PROC_VMCORE
KEXEC_FILE --| \ |
\---->CRASH_HOTPLUG
KEXEC --|
|--> KEXEC_CORE (for kexec reboot only)
KEXEC_FILE --|
Test
========
On all 8 architectures, including x86_64, arm64, s390x, sh, arm, mips,
riscv, loongarch, I did below three cases of config item setting and
building all passed. Take configs on x86_64 as exampmle here:
(1) Both CONFIG_KEXEC and KEXEC_FILE is unset, then all kexec/kdump
items are unset automatically:
# Kexec and crash features
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# end of Kexec and crash features
(2) set CONFIG_KEXEC_FILE and 'make olddefconfig':
---------------
# Kexec and crash features
CONFIG_CRASH_RESERVE=y
CONFIG_VMCORE_INFO=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC_FILE=y
CONFIG_CRASH_DUMP=y
CONFIG_CRASH_HOTPLUG=y
CONFIG_CRASH_MAX_MEMORY_RANGES=8192
# end of Kexec and crash features
---------------
(3) unset CONFIG_CRASH_DUMP in case 2 and execute 'make olddefconfig':
------------------------
# Kexec and crash features
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC_FILE=y
# end of Kexec and crash features
------------------------
Note:
For ppc, it needs investigation to make clear how to split out crash
code in arch folder. Hope Hari and Pingfan can help have a look, see if
it's doable. Now, I make it either have both kexec and crash enabled, or
disable both of them altogether.
This patch (of 14):
Both kdump and fa_dump of ppc rely on crashkernel reservation. Move the
relevant codes into separate files: crash_reserve.c,
include/linux/crash_reserve.h.
And also add config item CRASH_RESERVE to control its enabling of the
codes. And update config items which has relationship with crashkernel
reservation.
And also change ifdeffery from CONFIG_CRASH_CORE to CONFIG_CRASH_RESERVE
when those scopes are only crashkernel reservation related.
And also rename arch/XXX/include/asm/{crash_core.h => crash_reserve.h} on
arm64, x86 and risc-v because those architectures' crash_core.h is only
related to crashkernel reservation.
[akpm@linux-foundation.org: s/CRASH_RESEERVE/CRASH_RESERVE/, per Klara Modin]
Link: https://lkml.kernel.org/r/20240124051254.67105-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20240124051254.67105-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Earlier, vmap_area_list is exported to vmcoreinfo so that makedumpfile get
the base address of vmalloc area. Now, vmap_area_list is empty, so export
VMALLOC_START to vmcoreinfo instead, and remove vmap_area_list.
[urezki@gmail.com: fix a warning in the crash_save_vmcoreinfo_init()]
Link: https://lkml.kernel.org/r/20240111192329.449189-1-urezki@gmail.com
Link: https://lkml.kernel.org/r/20240102184633.748113-6-urezki@gmail.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Kazuhito Hagio <k-hagio-ab@nec.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
sparse warnings:
kernel/crash_core.c:749:1: sparse: sparse: symbol '__crash_hotplug_lock' was not declared. Should it be static?
Fixes: e2a8f20dd8 ("Crash: add lock to serialize crash hotplug handling")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401080654.IjjU5oK7-lkp@intel.com/
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in "nilfs2: Folio
conversions for file paths".
- Additional nilfs2 folio conversion from Ryusuke Konishi in "nilfs2:
Folio conversions for directory paths".
- IA64 remnant removal in Heiko Carstens's "Remove unused code after
IA-64 removal".
- Arnd Bergmann has enabled the -Wmissing-prototypes warning everywhere
in "Treewide: enable -Wmissing-prototypes". This had some followup
fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
"hexagon: Fix up instances of -Wmissing-prototypes".
- Nathan also addressed some s390 warnings in "s390: A couple of
fixes for -Wmissing-prototypes".
- Arnd Bergmann addresses the same warnings for MIPS in his series
"mips: address -Wmissing-prototypes warnings".
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series "kexec_file: Load kernel at top of
system RAM if required"
- Baoquan He has also added the self-explanatory "kexec_file: print out
debugging message if required".
- Some checkstack maintenance work from Tiezhu Yang in the series
"Modify some code about checkstack".
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is "watchdog:
Better handling of concurrent lockups".
- Yuntao Wang has contributed some maintenance work on the crash code in
"crash: Some cleanups and fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZ2R6AAKCRDdBJ7gKXxA
juCVAP4t76qUISDOSKugB/Dn5E4Nt9wvPY9PcufnmD+xoPsgkQD+JVl4+jd9+gAV
vl6wkJDiJO5JZ3FVtBtC3DFA/xHtVgk=
=kQw+
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
NR_PAGE_ORDERS defines the number of page orders supported by the page
allocator, ranging from 0 to MAX_ORDER, MAX_ORDER + 1 in total.
NR_PAGE_ORDERS assists in defining arrays of page orders and allows for
more natural iteration over them.
[kirill.shutemov@linux.intel.com: fixup for kerneldoc warning]
Link: https://lkml.kernel.org/r/20240101111512.7empzyifq7kxtzk3@box
Link: https://lkml.kernel.org/r/20231228144704.14033-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The purpose of crash_exclude_mem_range() is to remove all memory ranges
that overlap with [mstart-mend]. However, the current logic only removes
the first overlapping memory range.
Commit a2e9a95d21 ("kexec: Improve & fix crash_exclude_mem_range() to
handle overlapping ranges") attempted to address this issue, but it did
not fix all error cases.
Let's fix and simplify the logic of crash_exclude_mem_range().
Link: https://lkml.kernel.org/r/20240102144905.110047-4-ytcoode@gmail.com
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove second include of linux/kexec.h
Link: https://lkml.kernel.org/r/202312151654+0800-wangjinchao@xfusion.com
Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Then when specifying '-d' for kexec_file_load interface, loaded locations
of kernel/initrd/cmdline etc can be printed out to help debug.
Here replace pr_debug() with the newly added kexec_dprintk() in kexec_file
loading related codes.
And also print out type/start/head of kimage and flags to help debug.
Link: https://lkml.kernel.org/r/20231213055747.61826-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If crash_base is equal to CRASH_ADDR_LOW_MAX, it also indicates that
the crashkernel memory is allocated from high memory. However, the
current check only considers the case where crash_base is greater than
CRASH_ADDR_LOW_MAX. Fix it.
The runtime effects is that crashkernel high memory is successfully
reserved, whereas the crashkernel low memory is bypassed in this case,
then kdump kernel bootup will fail because of no low memory under 4G.
This patch also includes some minor cleanups.
Link: https://lkml.kernel.org/r/20231209141438.77233-1-ytcoode@gmail.com
Fixes: 0ab97169aa ("crash_core: add generic function to do reservation")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
So far, nobody calls functions parse_crashkernel_high() and
parse_crashkernel_low(), remove both of them.
Link: https://lkml.kernel.org/r/20230914033142.676708-10-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both crashk_res and crashk_low_res are used to mark the reserved
crashkernel regions in iomem_resource tree. And later the generic
crashkernel resrvation will be added into crash_core.c. So move
crashk_res and crashk_low_res definition into crash_core.c to avoid
compiling error if CONFIG_CRASH_CORE=on while CONFIG_KEXEC_CORE is unset.
Meanwhile include <asm/crash_core.h> in <linux/crash_core.h> if generic
reservation is needed. In that case, <asm/crash_core.h> need be added by
ARCH. In asm/crash_core.h, ARCH can provide its own macro definitions to
override macros in <linux/crash_core.h> if needed. Wrap the including
into CONFIG_ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION ifdeffery scope to
avoid compiling error in other ARCH-es which don't take the generic
reservation way yet.
Link: https://lkml.kernel.org/r/20230914033142.676708-6-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In architecture like x86_64, arm64 and riscv, they have vast virtual
address space and usually have huge physical memory RAM. Their
crashkernel reservation doesn't have to be limited under 4G RAM, but can
be extended to the whole physical memory via crashkernel=,high support.
Now add function reserve_crashkernel_generic() to reserve crashkernel
memory if users specify any case of kernel pamameters, like
crashkernel=xM[@offset] or crashkernel=,high|low.
This is preparation to simplify code of crashkernel=,high support in
architecutures.
Link: https://lkml.kernel.org/r/20230914033142.676708-5-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now parse_crashkernel() is a real entry point for all kinds of crahskernel
parsing on any architecture.
And wrap the crahskernel=,high|low handling inside
CONFIG_ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION ifdeffery scope.
Link: https://lkml.kernel.org/r/20230914033142.676708-4-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add two parameters 'low_size' and 'high' to function parse_crashkernel(),
later crashkernel=,high|low parsing will be added. Make adjustments in
all call sites of parse_crashkernel() in arch.
Link: https://lkml.kernel.org/r/20230914033142.676708-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kdump: use generic functions to simplify crashkernel
reservation in arch", v3.
In the current arm64, crashkernel=,high support has been finished after
several rounds of posting and careful reviewing. The code in arm64 which
parses crashkernel kernel parameters firstly, then reserve memory can be a
good example for other ARCH to refer to.
Whereas in x86_64, the code mixing crashkernel parameter parsing and
memory reserving is twisted, and looks messy. Refactoring the code to
make it more readable maintainable is necessary.
Here, firstly abstract the crashkernel parameter parsing code into
parse_crashkernel() to make it be able to parse crashkernel=,high|low.
Then abstract the crashkernel memory reserving code into a generic
function reserve_crashkernel_generic(). Finally, in ARCH which
crashkernel=,high support is needed, a simple arch_reserve_crashkernel()
can be added to call above two functions. This can remove the duplicated
implmentation code in each ARCH, like arm64, x86_64 and riscv.
crashkernel=512M,high
crashkernel=512M,high crashkernel=256M,low
crashkernel=512M,high crashkernel=0M,low
crashkernel=0M,high crashkernel=256M,low
crashkernel=512M
crashkernel=512M@0x4f000000
crashkernel=1G-4G:256M,4G-64G:320M,64G-:576M
crashkernel=0M
This patch (of 9):
In all call sites of __parse_crashkernel(), the parameter 'name' is
hardcoded as "crashkernel=". So remove the unnecessary parameter 'name',
add local varibale 'name' inside __parse_crashkernel() instead.
Link: https://lkml.kernel.org/r/20230914033142.676708-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20230914033142.676708-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Eric reported that handling corresponding crash hotplug event can be
failed easily when many memory hotplug event are notified in a short
period. They failed because failing to take __kexec_lock.
=======
[ 78.714569] Fallback order for Node 0: 0
[ 78.714575] Built 1 zonelists, mobility grouping on. Total pages: 1817886
[ 78.717133] Policy zone: Normal
[ 78.724423] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate
[ 78.727207] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate
[ 80.056643] PEFILE: Unsigned PE binary
=======
The memory hotplug events are notified very quickly and very many, while
the handling of crash hotplug is much slower relatively. So the atomic
variable __kexec_lock and kexec_trylock() can't guarantee the
serialization of crash hotplug handling.
Here, add a new mutex lock __crash_hotplug_lock to serialize crash hotplug
handling specifically. This doesn't impact the usage of __kexec_lock.
Link: https://lkml.kernel.org/r/20230926120905.392903-1-bhe@redhat.com
Fixes: 2472627561 ("crash: add generic infrastructure for crash hotplug support")
Signed-off-by: Baoquan He <bhe@redhat.com>
Tested-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
("refactor Kconfig to consolidate KEXEC and CRASH options").
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h").
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands").
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions").
- Switch the handling of kdump from a udev scheme to in-kernel handling,
by Eric DeVolder ("crash: Kernel handling of CPU and memory hot
un/plug").
- Many singleton patches to various parts of the tree
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA
juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy
QHy7lL0Syha38kKLMXTM+bN6YQHi9AU=
=WJQa
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
The function crash_prepare_elf64_headers() generates the elfcorehdr which
describes the CPUs and memory in the system for the crash kernel. In
particular, it writes out ELF PT_NOTEs for memory regions and the CPUs in
the system.
With respect to the CPUs, the current implementation utilizes
for_each_present_cpu() which means that as CPUs are added and removed, the
elfcorehdr must again be updated to reflect the new set of CPUs.
The reasoning behind the move to use for_each_possible_cpu(), is:
- At kernel boot time, all percpu crash_notes are allocated for all
possible CPUs; that is, crash_notes are not allocated dynamically
when CPUs are plugged/unplugged. Thus the crash_notes for each
possible CPU are always available.
- The crash_prepare_elf64_headers() creates an ELF PT_NOTE per CPU.
Changing to for_each_possible_cpu() is valid as the crash_notes
pointed to by each CPU PT_NOTE are present and always valid.
Furthermore, examining a common crash processing path of:
kernel panic -> crash kernel -> makedumpfile -> 'crash' analyzer
elfcorehdr /proc/vmcore vmcore
reveals how the ELF CPU PT_NOTEs are utilized:
- Upon panic, each CPU is sent an IPI and shuts itself down, recording
its state in its crash_notes. When all CPUs are shutdown, the
crash kernel is launched with a pointer to the elfcorehdr.
- The crash kernel via linux/fs/proc/vmcore.c does not examine or
use the contents of the PT_NOTEs, it exposes them via /proc/vmcore.
- The makedumpfile utility uses /proc/vmcore and reads the CPU
PT_NOTEs to craft a nr_cpus variable, which is reported in a
header but otherwise generally unused. Makedumpfile creates the
vmcore.
- The 'crash' dump analyzer does not appear to reference the CPU
PT_NOTEs. Instead it looks-up the cpu_[possible|present|onlin]_mask
symbols and directly examines those structure contents from vmcore
memory. From that information it is able to determine which CPUs
are present and online, and locate the corresponding crash_notes.
Said differently, it appears that 'crash' analyzer does not rely
on the ELF PT_NOTEs for CPUs; rather it obtains the information
directly via kernel symbols and the memory within the vmcore.
(There maybe other vmcore generating and analysis tools that do use these
PT_NOTEs, but 'makedumpfile' and 'crash' seems to be the most common
solution.)
This results in the benefit of having all CPUs described in the
elfcorehdr, and therefore reducing the need to re-generate the elfcorehdr
on CPU changes, at the small expense of an additional 56 bytes per PT_NOTE
for not-present-but-possible CPUs.
On systems where kexec_file_load() syscall is utilized, all the above is
valid. On systems where kexec_load() syscall is utilized, there may be
the need for the elfcorehdr to be regenerated once. The reason being that
some archs only populate the 'present' CPUs from the
/sys/devices/system/cpus entries, which the userspace 'kexec' utility uses
to generate the userspace-supplied elfcorehdr. In this situation, one
memory or CPU change will rewrite the elfcorehdr via the
crash_prepare_elf64_headers() function and now all possible CPUs will be
described, just as with kexec_file_load() syscall.
Link: https://lkml.kernel.org/r/20230814214446.6659-8-eric.devolder@oracle.com
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Suggested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Akhil Raj <lf32.dev@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The hotplug support for kexec_load() requires changes to the userspace
kexec-tools and a little extra help from the kernel.
Given a kdump capture kernel loaded via kexec_load(), and a subsequent
hotplug event, the crash hotplug handler finds the elfcorehdr and rewrites
it to reflect the hotplug change. That is the desired outcome, however,
at kernel panic time, the purgatory integrity check fails (because the
elfcorehdr changed), and the capture kernel does not boot and no vmcore is
generated.
Therefore, the userspace kexec-tools/kexec must indicate to the kernel
that the elfcorehdr can be modified (because the kexec excluded the
elfcorehdr from the digest, and sized the elfcorehdr memory buffer
appropriately).
To facilitate hotplug support with kexec_load():
- a new kexec flag KEXEC_UPATE_ELFCOREHDR indicates that it is
safe for the kernel to modify the kexec_load()'d elfcorehdr
- the /sys/kernel/crash_elfcorehdr_size node communicates the
preferred size of the elfcorehdr memory buffer
- The sysfs crash_hotplug nodes (ie.
/sys/devices/system/[cpu|memory]/crash_hotplug) dynamically
take into account kexec_file_load() vs kexec_load() and
KEXEC_UPDATE_ELFCOREHDR.
This is critical so that the udev rule processing of crash_hotplug
is all that is needed to determine if the userspace unload-then-load
of the kdump image is to be skipped, or not. The proposed udev
rule change looks like:
# The kernel updates the crash elfcorehdr for CPU and memory changes
SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
The table below indicates the behavior of kexec_load()'d kdump image
updates (with the new udev crash_hotplug rule in place):
Kernel |Kexec
-------+-----+----
Old |Old |New
| a | a
-------+-----+----
New | a | b
-------+-----+----
where kexec 'old' and 'new' delineate kexec-tools has the needed
modifications for the crash hotplug feature, and kernel 'old' and 'new'
delineate the kernel supports this crash hotplug feature.
Behavior 'a' indicates the unload-then-reload of the entire kdump image.
For the kexec 'old' column, the unload-then-reload occurs due to the
missing flag KEXEC_UPDATE_ELFCOREHDR. An 'old' kernel (with 'new' kexec)
does not present the crash_hotplug sysfs node, which leads to the
unload-then-reload of the kdump image.
Behavior 'b' indicates the desired optimized behavior of the kernel
directly modifying the elfcorehdr and avoiding the unload-then-reload of
the kdump image.
If the udev rule is not updated with crash_hotplug node check, then no
matter any combination of kernel or kexec is new or old, the kdump image
continues to be unload-then-reload on hotplug changes.
To fully support crash hotplug feature, there needs to be a rollout of
kernel, kexec-tools and udev rule changes. However, the order of the
rollout of these pieces does not matter; kexec_load()'d kdump images still
function for hotplug as-is.
Link: https://lkml.kernel.org/r/20230814214446.6659-7-eric.devolder@oracle.com
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Suggested-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Akhil Raj <lf32.dev@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To support crash hotplug, a mechanism is needed to update the crash
elfcorehdr upon CPU or memory changes (eg. hot un/plug or off/ onlining).
The crash elfcorehdr describes the CPUs and memory to be written into the
vmcore.
To track CPU changes, callbacks are registered with the cpuhp mechanism
via cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN). The crash hotplug
elfcorehdr update has no explicit ordering requirement (relative to other
cpuhp states), so meets the criteria for utilizing CPUHP_BP_PREPARE_DYN.
CPUHP_BP_PREPARE_DYN is a dynamic state and avoids the need to introduce a
new state for crash hotplug. Also, CPUHP_BP_PREPARE_DYN is the last state
in the PREPARE group, just prior to the STARTING group, which is very
close to the CPU starting up in a plug/online situation, or stopping in a
unplug/ offline situation. This minimizes the window of time during an
actual plug/online or unplug/offline situation in which the elfcorehdr
would be inaccurate. Note that for a CPU being unplugged or offlined, the
CPU will still be present in the list of CPUs generated by
crash_prepare_elf64_headers(). However, there is no need to explicitly
omit the CPU, see justification in 'crash: change
crash_prepare_elf64_headers() to for_each_possible_cpu()'.
To track memory changes, a notifier is registered to capture the memblock
MEM_ONLINE and MEM_OFFLINE events via register_memory_notifier().
The CPU callbacks and memory notifiers invoke crash_handle_hotplug_event()
which performs needed tasks and then dispatches the event to the
architecture specific arch_crash_handle_hotplug_event() to update the
elfcorehdr with the current state of CPUs and memory. During the process,
the kexec_lock is held.
Link: https://lkml.kernel.org/r/20230814214446.6659-3-eric.devolder@oracle.com
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Akhil Raj <lf32.dev@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "crash: Kernel handling of CPU and memory hot un/plug", v28.
Once the kdump service is loaded, if changes to CPUs or memory occur,
either by hot un/plug or off/onlining, the crash elfcorehdr must also be
updated.
The elfcorehdr describes to kdump the CPUs and memory in the system, and
any inaccuracies can result in a vmcore with missing CPU context or memory
regions.
The current solution utilizes udev to initiate an unload-then-reload of
the kdump image (eg. kernel, initrd, boot_params, purgatory and
elfcorehdr) by the userspace kexec utility. In the original post I
outlined the significant performance problems related to offloading this
activity to userspace.
This patchset introduces a generic crash handler that registers with the
CPU and memory notifiers. Upon CPU or memory changes, from either hot
un/plug or off/onlining, this generic handler is invoked and performs
important housekeeping, for example obtaining the appropriate lock, and
then invokes an architecture specific handler to do the appropriate
elfcorehdr update.
Note the description in patch 'crash: change crash_prepare_elf64_headers()
to for_each_possible_cpu()' and 'x86/crash: optimize CPU changes' that
enables further optimizations related to CPU plug/unplug/online/offline
performance of elfcorehdr updates.
In the case of x86_64, the arch specific handler generates a new
elfcorehdr, and overwrites the old one in memory; thus no involvement with
userspace needed.
To realize the benefits/test this patchset, one must make a couple
of minor changes to userspace:
- Prevent udev from updating kdump crash kernel on hot un/plug changes.
Add the following as the first lines to the RHEL udev rule file
/usr/lib/udev/rules.d/98-kexec.rules:
# The kernel updates the crash elfcorehdr for CPU and memory changes
SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
With this changeset applied, the two rules evaluate to false for
CPU and memory change events and thus skip the userspace
unload-then-reload of kdump.
- Change to the kexec_file_load for loading the kdump kernel:
Eg. on RHEL: in /usr/bin/kdumpctl, change to:
standard_kexec_args="-p -d -s"
which adds the -s to select kexec_file_load() syscall.
This kernel patchset also supports kexec_load() with a modified kexec
userspace utility. A working changeset to the kexec userspace utility is
posted to the kexec-tools mailing list here:
http://lists.infradead.org/pipermail/kexec/2023-May/027049.html
To use the kexec-tools patch, apply, build and install kexec-tools, then
change the kdumpctl's standard_kexec_args to replace the -s with
--hotplug. The removal of -s reverts to the kexec_load syscall and the
addition of --hotplug invokes the changes put forth in the kexec-tools
patch.
This patch (of 8):
The crash hotplug support leans on the work for the kexec_file_load()
syscall. To also support the kexec_load() syscall, a few bits of code
need to be move outside of CONFIG_KEXEC_FILE. As such, these bits are
moved out of kexec_file.c and into a common location crash_core.c.
In addition, struct crash_mem and crash_notes were moved to new locales so
that PROC_KCORE, which sets CRASH_CORE alone, builds correctly.
No functionality change intended.
Link: https://lkml.kernel.org/r/20230814214446.6659-1-eric.devolder@oracle.com
Link: https://lkml.kernel.org/r/20230814214446.6659-2-eric.devolder@oracle.com
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Akhil Raj <lf32.dev@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Store the folio order in the low byte of the flags word in the first tail
page. This frees up the word that was being used to store the order and
dtor bytes previously.
Link: https://lkml.kernel.org/r/20230816151201.3655946-11-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stored in the first tail page's flags, this flag replaces the destructor.
That removes the last of the destructors, so remove all references to
folio_dtor and compound_dtor.
Link: https://lkml.kernel.org/r/20230816151201.3655946-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We can use a bit in page[1].flags to indicate that this folio belongs to
hugetlb instead of using a value in page[1].dtors. That lets
folio_test_hugetlb() become an inline function like it should be. We can
also get rid of NULL_COMPOUND_DTOR.
Link: https://lkml.kernel.org/r/20230816151201.3655946-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All former users now use the folio equivalents, so remove them from the
definition of struct page.
Link: https://lkml.kernel.org/r/20230111142915.1001531-23-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Though vmcoreinfo is intended to be small, at just one page, useful
information is still added to it, so we risk running out of space.
Currently there is no runtime check to see whether the vmcoreinfo buffer
has been exhausted. Add a warning for this case.
Currently, my static checking tool[1] indicates that a good upper bound
for vmcoreinfo size is currently 3415 bytes, but the best time to add
warnings is before the risk becomes too high.
[1] https://github.com/brenns10/kernel_stuff/blob/master/vmcoreinfosize/vmcoreinfosize.py
Link: https://lkml.kernel.org/r/20221027205008.312534-1-stephen.s.brennan@oracle.com
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The rest of the kallsyms symbols are useless without knowing the number of
symbols in the table. In an earlier patch, I somehow dropped the
kallsyms_num_syms symbol, so add it back in.
Link: https://lkml.kernel.org/r/20220808205410.18590-1-stephen.s.brennan@oracle.com
Fixes: 5fd8fea935 ("vmcoreinfo: include kallsyms symbols")
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The total memory size we get in kernel is usually slightly less than the
actual memory size because BIOS/firmware will reserve some memory region.
So it won't export all memory as usable.
E.g, on my x86_64 kvm guest with 1G memory, the total_mem value shows:
UEFI boot with ovmf: 0x3faef000 Legacy boot kvm guest: 0x3ff7ec00
When specifying crashkernel=1G-2G:128M, if we have a 1G memory machine, we
get total size 1023M from firmware. Then it will not fall into 1G-2G,
thus no memory reserved. User will never know this, it is hard to let
user know the exact total value in kernel.
One way is to use dmi/smbios to get physical memory size, but it's not
reliable as well. According to Prarit hardware vendors sometimes screw
this up. Thus round up total size to 128M to work around this problem.
This patch is a resend of [1] and rebased onto v5.19-rc2, and the
original credit goes to Dave Young.
[1]: http://lists.infradead.org/pipermail/kexec/2018-April/020568.html
Link: https://lkml.kernel.org/r/20220627074440.187222-1-ltao@redhat.com
Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The internal kallsyms tables contain information which could be quite
useful to a debugging tool in the absence of other debuginfo. If kallsyms
is enabled, then a debugging tool could parse it and use it as a fallback
symbol table. Combined with BTF data, live & post-mortem debuggers can
support basic operations without needing a large DWARF debuginfo file
available. As many as five symbols are necessary to properly parse
kallsyms names and addresses. Add these to the vmcoreinfo note.
CONFIG_KALLSYMS_ABSOLUTE_PERCPU does impact the computation of symbol
addresses. However, a debugger can infer this configuration value by
comparing the address of _stext in the vmcoreinfo with the address
computed via kallsyms. So there's no need to include information about
this config value in the vmcoreinfo note.
To verify that we're still well below the maximum of 4096 bytes, I created
a script[1] to compute a rough upper bound on the possible size of
vmcoreinfo. On v5.18-rc7, the script reports 3106 bytes, and with this
patch, the maximum become 3370 bytes.
[1]: https://github.com/brenns10/kernel_stuff/blob/master/vmcoreinfosize/
Link: https://lkml.kernel.org/r/20220517000508.777145-3-stephen.s.brennan@oracle.com
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Bixuan Cui <cuibixuan@huawei.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Vernet <void@manifault.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
subsystems. Most notably some maintenance work in ocfs2 and initramfs.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo/6xQAKCRDdBJ7gKXxA
jkD9AQCPczLBbRWpe1edL+5VHvel9ePoHQmvbHQnufdTh9rB5QEAu0Uilxz4q9cx
xSZypNhj2n9f8FCYca/ZrZneBsTnAA8=
=AJEO
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"The non-MM patch queue for this merge window.
Not a lot of material this cycle. Many singleton patches against
various subsystems. Most notably some maintenance work in ocfs2
and initramfs"
* tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits)
kcov: update pos before writing pc in trace function
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock
fs/ntfs: remove redundant variable idx
fat: remove time truncations in vfat_create/vfat_mkdir
fat: report creation time in statx
fat: ignore ctime updates, and keep ctime identical to mtime in memory
fat: split fat_truncate_time() into separate functions
MAINTAINERS: add Muchun as a memcg reviewer
proc/sysctl: make protected_* world readable
ia64: mca: drop redundant spinlock initialization
tty: fix deadlock caused by calling printk() under tty_port->lock
relay: remove redundant assignment to pointer buf
fs/ntfs3: validate BOOT sectors_per_clusters
lib/string_helpers: fix not adding strarray to device's resource list
kernel/crash_core.c: remove redundant check of ck_cmdline
ELF, uapi: fixup ELF_ST_TYPE definition
ipc/mqueue: use get_tree_nodev() in mqueue_get_tree()
ipc: update semtimedop() to use hrtimer
ipc/sem: remove redundant assignments
...
At the end of get_last_crashkernel(), the judgement of ck_cmdline is
obviously unnecessary and causes redundance, let's clean it up.
Link: https://lkml.kernel.org/r/20220506104116.259323-1-sensor1010@163.com
Signed-off-by: lizhe <sensor1010@163.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
According to the current crashkernel=Y,low support in other ARCHes, it's
an optional command-line option. When it doesn't exist, kernel will try
to allocate minimum required memory below 4G automatically.
However, __parse_crashkernel() returns '-EINVAL' for all error cases. It
can't distinguish the nonexistent option from invalid option.
Change __parse_crashkernel() to return '-ENOENT' for the nonexistent option
case. With this change, crashkernel,low memory will take the default
value if crashkernel=,low is not specified; while crashkernel reservation
will fail and bail out if an invalid option is specified.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220506114402.365-2-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When booting with crashkernel= on the kernel command line a warning
similar to
Kernel command line: ro console=ttyS0 crashkernel=256M
Unknown kernel command line parameters "crashkernel=256M", will be passed to user space.
is printed.
This comes from crashkernel= being parsed independent from the kernel
parameter handling mechanism. So the code in init/main.c doesn't know
that crashkernel= is a valid kernel parameter and prints this incorrect
warning.
Suppress the warning by adding a dummy early_param handler for
crashkernel=.
Link: https://lkml.kernel.org/r/20211208133443.6867-1-prudo@redhat.com
Fixes: 86d1919a4f ("init: print out unknown kernel parameters")
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can use the vmlinux_build_id array here now instead of open coding it.
This mostly consolidates code.
Link: https://lkml.kernel.org/r/20210511003845.2429846-14-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After removal of the DISCONTIGMEM memory model the FLAT_NODE_MEM_MAP
configuration option is equivalent to FLATMEM.
Drop CONFIG_FLAT_NODE_MEM_MAP and use CONFIG_FLATMEM instead.
Link: https://lkml.kernel.org/r/20210608091316.3622-10-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After removal of DISCINTIGMEM the NEED_MULTIPLE_NODES and NUMA
configuration options are equivalent.
Drop CONFIG_NEED_MULTIPLE_NODES and use CONFIG_NUMA instead.
Done with
$ sed -i 's/CONFIG_NEED_MULTIPLE_NODES/CONFIG_NUMA/' \
$(git grep -wl CONFIG_NEED_MULTIPLE_NODES)
$ sed -i 's/NEED_MULTIPLE_NODES/NUMA/' \
$(git grep -wl NEED_MULTIPLE_NODES)
with manual tweaks afterwards.
[rppt@linux.ibm.com: fix arm boot crash]
Link: https://lkml.kernel.org/r/YMj9vHhHOiCVN4BF@linux.ibm.com
Link: https://lkml.kernel.org/r/20210608091316.3622-9-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As mentioned in kernel commit 1d50e5d0c5 ("crash_core, vmcoreinfo:
Append 'MAX_PHYSMEM_BITS' to vmcoreinfo"), SECTION_SIZE_BITS in the
formula:
#define SECTIONS_SHIFT (MAX_PHYSMEM_BITS - SECTION_SIZE_BITS)
Besides SECTIONS_SHIFT, SECTION_SIZE_BITS is also used to calculate
PAGES_PER_SECTION in makedumpfile just like kernel.
Unfortunately, this arch-dependent macro SECTION_SIZE_BITS changes, e.g.
recently in kernel commit f0b13ee232 ("arm64/sparsemem: reduce
SECTION_SIZE_BITS"). But user space wants a stable interface to get
this info. Such info is impossible to be deduced from a crashdump
vmcore. Hence append SECTION_SIZE_BITS to vmcoreinfo.
Link: https://lkml.kernel.org/r/20210608103359.84907-1-kernelfans@gmail.com
Link: http://lists.infradead.org/pipermail/kexec/2021-June/022676.html
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Cc: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Boris Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Anderson <anderson@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The offset of the field 'init_uts_ns.name' has changed since commit
9a56493f69 ("uts: Use generic ns_common::count").
Make the offset of the field 'uts_namespace.name' available in VMCOREINFO
because tools like 'crash-utility' and 'makedumpfile' must be able to read
it from crash dumps.
Link: https://lore.kernel.org/r/159644978167.604812.1773586504374412107.stgit@localhost.localdomain
Link: https://lkml.kernel.org/r/20200930102328.396488-1-egorenar@linux.ibm.com
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: lijiang <lijiang@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make kernel GNU build-id available in VMCOREINFO. Having build-id in
VMCOREINFO facilitates presenting appropriate kernel namelist image with
debug information file to kernel crash dump analysis tools. Currently
VMCOREINFO lacks uniquely identifiable key for crash analysis automation.
Regarding if this patch is necessary or matching of linux_banner and
OSRELEASE in VMCOREINFO employed by crash(8) meets the need -- IMO,
build-id approach more foolproof, in most instances it is a cryptographic
hash generated using internal code/ELF bits unlike kernel version string
upon which linux_banner is based that is external to the code. I feel
each is intended for a different purpose. Also OSRELEASE is not suitable
when two different kernel builds from same version with different features
enabled.
Currently for most linux (and non-linux) systems build-id can be extracted
using standard methods for file types such as user mode crash dumps,
shared libraries, loadable kernel modules etc., This is an exception for
linux kernel dump. Having build-id in VMCOREINFO brings some uniformity
for automation tools.
Tyler said:
: I think this is a nice improvement over today's linux_banner approach for
: correlating vmlinux to a kernel dump.
:
: The elf notes parsing in this patch lines up with what is described in in
: the "Notes (Nhdr)" section of the elf(5) man page.
:
: BUILD_ID_MAX is sufficient to hold a sha1 build-id, which is the default
: build-id type today in GNU ld(2). It is also sufficient to hold the
: "fast" build-id, which is the default build-id type today in LLVM lld(2).
Signed-off-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/1591849672-34104-1-git-send-email-vijayb@linux.microsoft.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Right now user-space tools like 'makedumpfile' and 'crash' need to rely
on a best-guess method of determining value of 'MAX_PHYSMEM_BITS'
supported by underlying kernel.
This value is used in user-space code to calculate the bit-space
required to store a section for SPARESMEM (similar to the existing
calculation method used in the kernel implementation):
#define SECTIONS_SHIFT (MAX_PHYSMEM_BITS - SECTION_SIZE_BITS)
Now, regressions have been reported in user-space utilities
like 'makedumpfile' and 'crash' on arm64, with the recently added
kernel support for 52-bit physical address space, as there is
no clear method of determining this value in user-space
(other than reading kernel CONFIG flags).
As per suggestion from makedumpfile maintainer (Kazu), it makes more
sense to append 'MAX_PHYSMEM_BITS' to vmcoreinfo in the core code itself
rather than in arch-specific code, so that the user-space code for other
archs can also benefit from this addition to the vmcoreinfo and use it
as a standard way of determining 'SECTIONS_SHIFT' value in user-land.
A reference 'makedumpfile' implementation which reads the
'MAX_PHYSMEM_BITS' value from vmcoreinfo in a arch-independent fashion
is available here:
While at it also update vmcoreinfo documentation for 'MAX_PHYSMEM_BITS'
variable being added to vmcoreinfo.
'MAX_PHYSMEM_BITS' defines the maximum supported physical address
space memory.
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Tested-by: John Donnelly <john.p.donnelly@oracle.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: Boris Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Anderson <anderson@redhat.com>
Cc: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Cc: x86@kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: kexec@lists.infradead.org
Link: https://lore.kernel.org/r/1589395957-24628-2-git-send-email-bhsharma@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Based on 2 normalized pattern(s):
this source code is licensed under the gnu general public license
version 2 see the file copying for more details
this source code is licensed under general public license version 2
see
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 52 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.449021192@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now, pages inflated as part of a balloon driver will be dumped by
dump tools like makedumpfile. While XEN is able to check in the crash
kernel whether a certain pfn is actuall backed by memory in the
hypervisor (see xen_oldmem_pfn_is_ram) and optimize this case, dumps of
other balloon inflated memory will essentially result in zero pages
getting allocated by the hypervisor and the dump getting filled with
this data.
The allocation and reading of zero pages can directly be avoided if a
dumping tool could know which pages only contain stale information not
to be dumped.
We now have PG_offline which can be (and already is by virtio-balloon)
used for marking pages as logically offline. Follow up patches will
make use of this flag also in other balloon implementations.
Let's export PG_offline via PAGE_OFFLINE_MAPCOUNT_VALUE, so makedumpfile
can directly skip pages that are logically offline and the content
therefore stale.
Please note that this is also helpful for a problem we were seeing under
Hyper-V: Dumping logically offline memory (pages kept fake offline while
onlining a section via online_page_callback) would under some condicions
result in a kernel panic when dumping them.
Link: http://lkml.kernel.org/r/20181119101616.8901-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Lianbo Jiang <lijiang@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Christian Hansen <chansen3@cisco.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juergen Gross <jgross@suse.com>
Cc: Julien Freche <jfreche@vmware.com>
Cc: Kairui Song <kasong@redhat.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Miles Chen <miles.chen@mediatek.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Pankaj gupta <pagupta@redhat.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The get_seconds() call returns a 32-bit timestamp on some architectures,
and will overflow in the future. The newer ktime_get_real_seconds()
always returns a 64-bit timestamp that does not suffer from this problem.
Link: http://lkml.kernel.org/r/20180618150329.941903-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The vmcoreinfo information is useful for runtime debugging tools, not just
for crash dumps. A lot of this information can be determined by other
means, but this is much more convenient, and it only adds a page at most
to the file.
Link: http://lkml.kernel.org/r/fddbcd08eed76344863303878b12de1c1e2a04b6.1531953780.git.osandov@fb.com
Signed-off-by: Omar Sandoval <osandov@fb.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is preparation for allowing CRASH_CORE to be enabled for any
architecture.
swapper_pg_dir is always either an array or a macro expanding to NULL.
In the latter case, VMCOREINFO_SYMBOL() won't work, as it tries to take
the address of the given symbol:
#define VMCOREINFO_SYMBOL(name) \
vmcoreinfo_append_str("SYMBOL(%s)=%lx\n", #name, (unsigned long)&name)
Instead, use VMCOREINFO_SYMBOL_ARRAY(), which uses the value:
#define VMCOREINFO_SYMBOL_ARRAY(name) \
vmcoreinfo_append_str("SYMBOL(%s)=%lx\n", #name, (unsigned long)name)
This is the same thing for the array case but isn't an error for the macro
case.
Link: http://lkml.kernel.org/r/c05f9781ec204f40fc96f95086e7b6de6a3eb2c3.1532563124.git.osandov@fb.com
Signed-off-by: Omar Sandoval <osandov@fb.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baoquan He
Andrew Morton
Huacai Chen
Linus Torvalds
Kirill A. Shutemov
Yuntao Wang
Wang Jinchao
Eric DeVolder
Matthew Wilcox (Oracle)
Stephen Brennan
Tao Liu
lizhe
Zhen Lei
Philipp Rudo
Stephen Boyd
Mike Rapoport
Pingfan Liu
Alexander Egorenkov
Eric Biggers
Vijay Balakrishna
Bhupesh Sharma
Thomas Gleixner
David Hildenbrand
Arnd Bergmann
Omar Sandoval