The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Make sure to start the kthread to check the power button on qemu as
well if the power button address was provided.
This fixes the qemu built-in system_powerdown runtime command.
Fixes: d0c2194729 ("parisc/power: Add power soft-off when running on qemu")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Firmware returns the physical address of the power switch,
so need to use gsc_writel() instead of direct memory access.
Fixes: d0c2194729 ("parisc/power: Add power soft-off when running on qemu")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
Clean up the code, e.g. make proc_mckinley_root static, drop the now
empty mckinley header file and remove some unneeded ifdefs around procfs
functions.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308300800.Jod4sHzM-lkp@intel.com/
Fixes: 77e0ddf097 ("parisc: ccio-dma: Create private runway procfs root entry")
Create an own procfs "runway" root entry for the CCIO driver.
No need to share it with the sba_iommu driver, as only one
of those busses can be active in one machine anyway.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 547259580d ("parisc: Move proc_mckinley_root and proc_runway_root to sba_iommu")
Cc: <stable@vger.kernel.org> # v6.5
Rewrite the whole driver and drop the own code to calculate load
average, disk and LAN load. Switch instead to use the in-kernel LED
subsystem, which gives us quite some advantages, e.g.
- existing triggers for heartbeat and disk/lan activity can be used
- users can configre the LEDs at will to any existing trigger via
/sys/class/leds
- less overhead since we don't need to run own timers
- fully integrated in Linux and as such cleaner code.
Note that the driver now depends on CONFIG_LEDS_CLASS which has to
be built-in and not as module.
Signed-off-by: Helge Deller <deller@gmx.de>
Move initialization code for LASI out of the GSC driver.
Since ASP and WAX have been moved in previous commits,
the GSC driver is now just a driver which provides library
functions for LASI, ASP and WAX and as such doesn't need
an own initialization function any longer.
Signed-off-by: Helge Deller <deller@gmx.de>
This is the order in which the drivers are initialized in setup.c.
The order is important when the drivers are convertet to use the
initcall_*() startup framework.
Signed-off-by: Helge Deller <deller@gmx.de>
Older PA-RISC machines have LEDs which show the disk- and LAN-activity.
The computation is done in software and takes quite some time, e.g. on a
J6500 this may take up to 60% time of one CPU if the machine is loaded
via network traffic.
Since most people don't care about the LEDs, start with LEDs disabled and
just show a CPU heartbeat LED. The disk and LAN LEDs can be turned on
manually via /proc/pdc/led.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
The LBA has already called ioremap() to get it's virtual address,
which can be used for the IOSAPIC as well.
Avoid calling ioremap() again and just reuse the correct
iomem address for the IOSAPIC.
Signed-off-by: Helge Deller <deller@gmx.de>
Clean up the code to not have external function declarations
inside the C source files. Reduces warnings when compiled with W=1.
Signed-off-by: Helge Deller <deller@gmx.de>
The panic notifiers' callbacks execute in an atomic context, with
interrupts/preemption disabled, and all CPUs not running the panic
function are off, so it's very dangerous to wait on a regular
spinlock, there's a risk of deadlock.
Refactor the panic notifier of parisc/power driver to make use
of spin_trylock - for that, we've added a second version of the
soft-power function. Also, some comments were reorganized and
trailing white spaces, useless header inclusion and blank lines
were removed.
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jeroen Roovers <jer@xs4all.nl>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Helge Deller <deller@gmx.de>
We introduce a new HAS_IOPORT Kconfig option to indicate support for I/O
Port access. In a future patch HAS_IOPORT=n will disable compilation of
the I/O accessor functions inb()/outb() and friends on architectures
which can not meaningfully support legacy I/O spaces such as s390.
The following architectures do not select HAS_IOPORT:
* ARC
* C-SKY
* Hexagon
* Nios II
* OpenRISC
* s390
* User-Mode Linux
* Xtensa
All other architectures select HAS_IOPORT at least conditionally.
The "depends on" relations on HAS_IOPORT in drivers as well as ifdefs
for HAS_IOPORT specific sections will be added in subsequent patches on
a per subsystem basis.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net> # for ARCH=um
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL-terminated strings.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Signed-off-by: Helge Deller <deller@gmx.de>
start_task() calls create_singlethread_workqueue() and not checked the
ret value, which may return NULL. And a null-ptr-deref may happen:
start_task()
create_singlethread_workqueue() # failed, led_wq is NULL
queue_delayed_work()
queue_delayed_work_on()
__queue_delayed_work() # warning here, but continue
__queue_work() # access wq->flags, null-ptr-deref
Check the ret value and return -ENOMEM if it is NULL.
Fixes: 3499495205 ("[PARISC] Use work queue in LED/LCD driver instead of tasklet.")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
The parisc serial port driver needs this symbol when it's compiled
as module.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org>
Clean up the struct for hardware_path and drop the struct device_path
with a proper assignment of bc[] and mod members as signed chars.
This patch prepares for the kbuild change from Jason A. Donenfeld to
treat char as always unsigned.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
* Convert the PDC console to an early console
* Unbreak mmap() of graphics card memory due to PAGE_SPECIAL pgtable flag
* Reduce the size of the alternative tables
* Align stifb graphics card memory size to 4MB
* Spelling fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCY0mnYAAKCRD3ErUQojoP
X1z3AQC204Pq725WM3rgEomIqFjk8QaU2UFcNQ74a52V3AUiiQD8C0DFmWDbssUv
ZE5uC+ySlNd1hLkL3QYxrbbwuL+y+Q0=
=YvFZ
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Fixes:
- When we added basic vDSO support in kernel 5.18 we introduced a bug
which prevented a mmap() of graphic card memory. This is because we
used the DMB (data memory break trap bit) page flag as special-bit,
but missed to clear that bit when loading the TLB.
- Graphics card memory size was not correctly aligned
- Spelling fixes (from Colin Ian King)
Enhancements:
- PDC console (which uses firmware calls) now rewritten as early
console
- Reduced size of alternative tables"
* tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix spelling mistake "mis-match" -> "mismatch" in eisa driver
parisc: Fix userspace graphics card breakage due to pgtable special bit
parisc: fbdev/stifb: Align graphics memory size to 4MB
parisc: Convert PDC console to an early console
parisc: Reduce kernel size by packing alternative tables
There are several spelling mistakes in kernel error messages. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
This contains a series from Linus Walleij to unify the linux/io.h
interface by making the ia64, alpha, parisc and sparc include
asm-generic/io.h. All functions provided by the generic header are
now available to all drivers, but the architectures can still override
this. For the moment, mips and sh still don't include asm-generic/io.h
but provide a full set of functions themselves.
There are also a few minor cleanups unrelated to this.
-----BEGIN PGP SIGNATURE-----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=4dNP
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"This contains a series from Linus Walleij to unify the linux/io.h
interface by making the ia64, alpha, parisc and sparc include
asm-generic/io.h.
All functions provided by the generic header are now available to all
drivers, but the architectures can still override this.
For the moment, mips and sh still don't include asm-generic/io.h but
provide a full set of functions themselves.
There are also a few minor cleanups unrelated to this"
* tag 'asm-generic-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
alpha: add full ioread64/iowrite64 implementation
parisc: Drop homebrewn io[read|write]64_[lo_hi|hi_lo]
parisc: hide ioread64 declaration on 32-bit
ia64: export memory_add_physaddr_to_nid to fix cxl build error
asm-generic: Remove empty #ifdef SA_RESTORER
parisc: Use the generic IO helpers
parisc: Remove 64bit access on 32bit machines
sparc: Fix the generic IO helpers
alpha: Use generic <asm-generic/io.h>
kmalloc() returns memory with __assume_kmalloc_alignment, which is
__alignof__(unsigned long long) for parisc.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The parisc was using some readq/writeq accessors without special
considerations as to what will happen on 32bit CPUs if you do
this. Maybe we have been lucky that it "just worked" on 32bit
due to the compiler behaviour, or the code paths were never
executed.
Fix the two offending code sites like this:
arch/parisc/lib/iomap.c:
- Put ifdefs around the 64bit accessors and make sure
that ioread64, ioread64be, iowrite64 and iowrite64be
are not available on 32bit builds.
- Also fold in a bug fix where 64bit access was by
mistake using 32bit writel() accessors rather
than 64bit writeq().
drivers/parisc/sba_iommu.c:
- Access any 64bit registers using _lo_hi-semantics by way
of the readq and writeq operations provided by
<linux/io-64-nonatomic-lo-hi.h>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As the possible failure of the kmalloc(), it should be better
to fix this error path, check and return '-ENOMEM' error code.
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The double `was' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Uwe Kleine-König
Helge Deller
Guilherme G. Piccoli
Niklas Schnelle
Xu Panda
Shang XiaoJing
Linus Torvalds
Colin Ian King
Rolf Eike Beer
Yang Yingliang
Linus Walleij
Li Qiong
Wolfram Sang
Jason Wang