From 04703bfd7f99c016a823c74712b97f8b5590ce87 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 26 Apr 2024 18:02:53 +0200 Subject: [PATCH 01/18] drm/meson: dw-hdmi: power up phy on device init The phy is not in a useful state right after init. It will become useful, including for auxiliary function such as CEC or ARC, after the first mode is set. This is a problem on systems where the display is using another interface like DSI or CVBS. This change refactor the init and mode change callback to power up the PHY on init and leave only what is necessary for mode changes in the related function. This is enough to fix CEC operation when HDMI display is not enabled. Fixes: 3f68be7d8e96 ("drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY") Signed-off-by: Jerome Brunet Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20240426160256.3089978-2-jbrunet@baylibre.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240426160256.3089978-2-jbrunet@baylibre.com --- drivers/gpu/drm/meson/meson_dw_hdmi.c | 51 +++++++++------------------ 1 file changed, 17 insertions(+), 34 deletions(-) diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c index 5a9538bc0e26..a83d93078537 100644 --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c @@ -384,26 +384,6 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data, dw_hdmi_bus_fmt_is_420(hdmi)) mode_is_420 = true; - /* Enable clocks */ - regmap_update_bits(priv->hhi, HHI_HDMI_CLK_CNTL, 0xffff, 0x100); - - /* Bring HDMITX MEM output of power down */ - regmap_update_bits(priv->hhi, HHI_MEM_PD_REG0, 0xff << 8, 0); - - /* Bring out of reset */ - dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_SW_RESET, 0); - - /* Enable internal pixclk, tmds_clk, spdif_clk, i2s_clk, cecclk */ - dw_hdmi_top_write_bits(dw_hdmi, HDMITX_TOP_CLK_CNTL, - 0x3, 0x3); - - /* Enable cec_clk and hdcp22_tmdsclk_en */ - dw_hdmi_top_write_bits(dw_hdmi, HDMITX_TOP_CLK_CNTL, - 0x3 << 4, 0x3 << 4); - - /* Enable normal output to PHY */ - dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12)); - /* TMDS pattern setup */ if (mode->clock > 340000 && !mode_is_420) { dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01, @@ -425,20 +405,6 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data, /* Setup PHY parameters */ meson_hdmi_phy_setup_mode(dw_hdmi, mode, mode_is_420); - /* Setup PHY */ - regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, - 0xffff << 16, 0x0390 << 16); - - /* BIT_INVERT */ - if (dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxl-dw-hdmi") || - dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxm-dw-hdmi") || - dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-g12a-dw-hdmi")) - regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, - BIT(17), 0); - else - regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, - BIT(17), BIT(17)); - /* Disable clock, fifo, fifo_wr */ regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, 0xf, 0); @@ -656,6 +622,23 @@ static void meson_dw_hdmi_init(struct meson_dw_hdmi *meson_dw_hdmi) meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_CLK_CNTL, 0xff); + /* Enable normal output to PHY */ + meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12)); + + /* Setup PHY */ + regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, + 0xffff << 16, 0x0390 << 16); + + /* BIT_INVERT */ + if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") || + dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") || + dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-g12a-dw-hdmi")) + regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, + BIT(17), 0); + else + regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, + BIT(17), BIT(17)); + /* Enable HDMI-TX Interrupt */ meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_INTR_STAT_CLR, HDMITX_TOP_INTR_CORE); From 08001033121dd92b8297a5b7333636b466c30f13 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 26 Apr 2024 18:02:54 +0200 Subject: [PATCH 02/18] drm/meson: dw-hdmi: add bandgap setting for g12 When no mode is set, the utility pin appears to be grounded. No signal is getting through. This is problematic because ARC and eARC use this line and may do so even if no display mode is set. This change enable the bandgap setting on g12 chip, which fix the problem with the utility pin. This is done by restoring init values on PHY init and disable. Fixes: 3b7c1237a72a ("drm/meson: Add G12A support for the DW-HDMI Glue") Signed-off-by: Jerome Brunet Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20240426160256.3089978-3-jbrunet@baylibre.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240426160256.3089978-3-jbrunet@baylibre.com --- drivers/gpu/drm/meson/meson_dw_hdmi.c | 43 ++++++++++++++++----------- 1 file changed, 26 insertions(+), 17 deletions(-) diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c index a83d93078537..5565f7777529 100644 --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c @@ -106,6 +106,8 @@ #define HHI_HDMI_CLK_CNTL 0x1cc /* 0x73 */ #define HHI_HDMI_PHY_CNTL0 0x3a0 /* 0xe8 */ #define HHI_HDMI_PHY_CNTL1 0x3a4 /* 0xe9 */ +#define PHY_CNTL1_INIT 0x03900000 +#define PHY_INVERT BIT(17) #define HHI_HDMI_PHY_CNTL2 0x3a8 /* 0xea */ #define HHI_HDMI_PHY_CNTL3 0x3ac /* 0xeb */ #define HHI_HDMI_PHY_CNTL4 0x3b0 /* 0xec */ @@ -130,6 +132,8 @@ struct meson_dw_hdmi_data { unsigned int addr); void (*dwc_write)(struct meson_dw_hdmi *dw_hdmi, unsigned int addr, unsigned int data); + u32 cntl0_init; + u32 cntl1_init; }; struct meson_dw_hdmi { @@ -458,7 +462,9 @@ static void dw_hdmi_phy_disable(struct dw_hdmi *hdmi, DRM_DEBUG_DRIVER("\n"); - regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, 0); + /* Fallback to init mode */ + regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL1, dw_hdmi->data->cntl1_init); + regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, dw_hdmi->data->cntl0_init); } static enum drm_connector_status dw_hdmi_read_hpd(struct dw_hdmi *hdmi, @@ -576,11 +582,22 @@ static const struct regmap_config meson_dw_hdmi_regmap_config = { .fast_io = true, }; -static const struct meson_dw_hdmi_data meson_dw_hdmi_gx_data = { +static const struct meson_dw_hdmi_data meson_dw_hdmi_gxbb_data = { .top_read = dw_hdmi_top_read, .top_write = dw_hdmi_top_write, .dwc_read = dw_hdmi_dwc_read, .dwc_write = dw_hdmi_dwc_write, + .cntl0_init = 0x0, + .cntl1_init = PHY_CNTL1_INIT | PHY_INVERT, +}; + +static const struct meson_dw_hdmi_data meson_dw_hdmi_gxl_data = { + .top_read = dw_hdmi_top_read, + .top_write = dw_hdmi_top_write, + .dwc_read = dw_hdmi_dwc_read, + .dwc_write = dw_hdmi_dwc_write, + .cntl0_init = 0x0, + .cntl1_init = PHY_CNTL1_INIT, }; static const struct meson_dw_hdmi_data meson_dw_hdmi_g12a_data = { @@ -588,6 +605,8 @@ static const struct meson_dw_hdmi_data meson_dw_hdmi_g12a_data = { .top_write = dw_hdmi_g12a_top_write, .dwc_read = dw_hdmi_g12a_dwc_read, .dwc_write = dw_hdmi_g12a_dwc_write, + .cntl0_init = 0x000b4242, /* Bandgap */ + .cntl1_init = PHY_CNTL1_INIT, }; static void meson_dw_hdmi_init(struct meson_dw_hdmi *meson_dw_hdmi) @@ -626,18 +645,8 @@ static void meson_dw_hdmi_init(struct meson_dw_hdmi *meson_dw_hdmi) meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12)); /* Setup PHY */ - regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, - 0xffff << 16, 0x0390 << 16); - - /* BIT_INVERT */ - if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") || - dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") || - dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-g12a-dw-hdmi")) - regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, - BIT(17), 0); - else - regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, - BIT(17), BIT(17)); + regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL1, meson_dw_hdmi->data->cntl1_init); + regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, meson_dw_hdmi->data->cntl0_init); /* Enable HDMI-TX Interrupt */ meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_INTR_STAT_CLR, @@ -848,11 +857,11 @@ static const struct dev_pm_ops meson_dw_hdmi_pm_ops = { static const struct of_device_id meson_dw_hdmi_of_table[] = { { .compatible = "amlogic,meson-gxbb-dw-hdmi", - .data = &meson_dw_hdmi_gx_data }, + .data = &meson_dw_hdmi_gxbb_data }, { .compatible = "amlogic,meson-gxl-dw-hdmi", - .data = &meson_dw_hdmi_gx_data }, + .data = &meson_dw_hdmi_gxl_data }, { .compatible = "amlogic,meson-gxm-dw-hdmi", - .data = &meson_dw_hdmi_gx_data }, + .data = &meson_dw_hdmi_gxl_data }, { .compatible = "amlogic,meson-g12a-dw-hdmi", .data = &meson_dw_hdmi_g12a_data }, { } From 51c1b42a232f17743cd825be6790cb64735ff98f Mon Sep 17 00:00:00 2001 From: Andi Shyti Date: Fri, 26 Apr 2024 02:07:23 +0200 Subject: [PATCH 03/18] drm/i915/gt: Automate CCS Mode setting during engine resets We missed setting the CCS mode during resume and engine resets. Create a workaround to be added in the engine's workaround list. This workaround sets the XEHP_CCS_MODE value at every reset. The issue can be reproduced by running: $ clpeak --kernel-latency Without resetting the CCS mode, we encounter a fence timeout: Fence expiration time out i915-0000:03:00.0:clpeak[2387]:2! Fixes: 6db31251bb26 ("drm/i915/gt: Enable only one CCS for compute workload") Reported-by: Gnattu OC Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10895 Signed-off-by: Andi Shyti Cc: Chris Wilson Cc: Joonas Lahtinen Cc: Matt Roper Cc: # v6.2+ Tested-by: Gnattu OC Reviewed-by: Rodrigo Vivi Tested-by: Krzysztof Gibala Link: https://patchwork.freedesktop.org/patch/msgid/20240426000723.229296-1-andi.shyti@linux.intel.com (cherry picked from commit 4cfca03f76413db115c3cc18f4370debb1b81b2b) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/gt/intel_gt_ccs_mode.c | 6 +++--- drivers/gpu/drm/i915/gt/intel_gt_ccs_mode.h | 2 +- drivers/gpu/drm/i915/gt/intel_workarounds.c | 4 +++- 3 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_gt_ccs_mode.c b/drivers/gpu/drm/i915/gt/intel_gt_ccs_mode.c index 044219c5960a..99b71bb7da0a 100644 --- a/drivers/gpu/drm/i915/gt/intel_gt_ccs_mode.c +++ b/drivers/gpu/drm/i915/gt/intel_gt_ccs_mode.c @@ -8,14 +8,14 @@ #include "intel_gt_ccs_mode.h" #include "intel_gt_regs.h" -void intel_gt_apply_ccs_mode(struct intel_gt *gt) +unsigned int intel_gt_apply_ccs_mode(struct intel_gt *gt) { int cslice; u32 mode = 0; int first_ccs = __ffs(CCS_MASK(gt)); if (!IS_DG2(gt->i915)) - return; + return 0; /* Build the value for the fixed CCS load balancing */ for (cslice = 0; cslice < I915_MAX_CCS; cslice++) { @@ -35,5 +35,5 @@ void intel_gt_apply_ccs_mode(struct intel_gt *gt) XEHP_CCS_MODE_CSLICE_MASK); } - intel_uncore_write(gt->uncore, XEHP_CCS_MODE, mode); + return mode; } diff --git a/drivers/gpu/drm/i915/gt/intel_gt_ccs_mode.h b/drivers/gpu/drm/i915/gt/intel_gt_ccs_mode.h index 9e5549caeb26..55547f2ff426 100644 --- a/drivers/gpu/drm/i915/gt/intel_gt_ccs_mode.h +++ b/drivers/gpu/drm/i915/gt/intel_gt_ccs_mode.h @@ -8,6 +8,6 @@ struct intel_gt; -void intel_gt_apply_ccs_mode(struct intel_gt *gt); +unsigned int intel_gt_apply_ccs_mode(struct intel_gt *gt); #endif /* __INTEL_GT_CCS_MODE_H__ */ diff --git a/drivers/gpu/drm/i915/gt/intel_workarounds.c b/drivers/gpu/drm/i915/gt/intel_workarounds.c index 6ec3582c9735..85c860ea9d7c 100644 --- a/drivers/gpu/drm/i915/gt/intel_workarounds.c +++ b/drivers/gpu/drm/i915/gt/intel_workarounds.c @@ -2859,6 +2859,7 @@ add_render_compute_tuning_settings(struct intel_gt *gt, static void ccs_engine_wa_mode(struct intel_engine_cs *engine, struct i915_wa_list *wal) { struct intel_gt *gt = engine->gt; + u32 mode; if (!IS_DG2(gt->i915)) return; @@ -2875,7 +2876,8 @@ static void ccs_engine_wa_mode(struct intel_engine_cs *engine, struct i915_wa_li * After having disabled automatic load balancing we need to * assign all slices to a single CCS. We will call it CCS mode 1 */ - intel_gt_apply_ccs_mode(gt); + mode = intel_gt_apply_ccs_mode(gt); + wa_masked_en(wal, XEHP_CCS_MODE, mode); } /* From c66b8356273c8d22498f88e4223af47a7bf8a23c Mon Sep 17 00:00:00 2001 From: Chaitanya Kumar Borah Date: Tue, 30 Apr 2024 14:48:25 +0530 Subject: [PATCH 04/18] drm/i915/audio: Fix audio time stamp programming for DP Intel hardware is capable of programming the Maud/Naud SDPs on its own based on real-time clocks. While doing so, it takes care of any deviations from the theoretical values. Programming the registers explicitly with static values can interfere with this logic. Therefore, let the HW decide the Maud and Naud SDPs on it's own. Cc: stable@vger.kernel.org # v5.17 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8097 Co-developed-by: Kai Vehmanen Signed-off-by: Kai Vehmanen Signed-off-by: Chaitanya Kumar Borah Reviewed-by: Uma Shankar Signed-off-by: Animesh Manna Link: https://patchwork.freedesktop.org/patch/msgid/20240430091825.733499-1-chaitanya.kumar.borah@intel.com (cherry picked from commit 8e056b50d92ae7f4d6895d1c97a69a2a953cf97b) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_audio.c | 113 ++------------------- 1 file changed, 8 insertions(+), 105 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_audio.c b/drivers/gpu/drm/i915/display/intel_audio.c index 07e0c73204f3..ed81e1466c4b 100644 --- a/drivers/gpu/drm/i915/display/intel_audio.c +++ b/drivers/gpu/drm/i915/display/intel_audio.c @@ -76,19 +76,6 @@ struct intel_audio_funcs { struct intel_crtc_state *crtc_state); }; -/* DP N/M table */ -#define LC_810M 810000 -#define LC_540M 540000 -#define LC_270M 270000 -#define LC_162M 162000 - -struct dp_aud_n_m { - int sample_rate; - int clock; - u16 m; - u16 n; -}; - struct hdmi_aud_ncts { int sample_rate; int clock; @@ -96,60 +83,6 @@ struct hdmi_aud_ncts { int cts; }; -/* Values according to DP 1.4 Table 2-104 */ -static const struct dp_aud_n_m dp_aud_n_m[] = { - { 32000, LC_162M, 1024, 10125 }, - { 44100, LC_162M, 784, 5625 }, - { 48000, LC_162M, 512, 3375 }, - { 64000, LC_162M, 2048, 10125 }, - { 88200, LC_162M, 1568, 5625 }, - { 96000, LC_162M, 1024, 3375 }, - { 128000, LC_162M, 4096, 10125 }, - { 176400, LC_162M, 3136, 5625 }, - { 192000, LC_162M, 2048, 3375 }, - { 32000, LC_270M, 1024, 16875 }, - { 44100, LC_270M, 784, 9375 }, - { 48000, LC_270M, 512, 5625 }, - { 64000, LC_270M, 2048, 16875 }, - { 88200, LC_270M, 1568, 9375 }, - { 96000, LC_270M, 1024, 5625 }, - { 128000, LC_270M, 4096, 16875 }, - { 176400, LC_270M, 3136, 9375 }, - { 192000, LC_270M, 2048, 5625 }, - { 32000, LC_540M, 1024, 33750 }, - { 44100, LC_540M, 784, 18750 }, - { 48000, LC_540M, 512, 11250 }, - { 64000, LC_540M, 2048, 33750 }, - { 88200, LC_540M, 1568, 18750 }, - { 96000, LC_540M, 1024, 11250 }, - { 128000, LC_540M, 4096, 33750 }, - { 176400, LC_540M, 3136, 18750 }, - { 192000, LC_540M, 2048, 11250 }, - { 32000, LC_810M, 1024, 50625 }, - { 44100, LC_810M, 784, 28125 }, - { 48000, LC_810M, 512, 16875 }, - { 64000, LC_810M, 2048, 50625 }, - { 88200, LC_810M, 1568, 28125 }, - { 96000, LC_810M, 1024, 16875 }, - { 128000, LC_810M, 4096, 50625 }, - { 176400, LC_810M, 3136, 28125 }, - { 192000, LC_810M, 2048, 16875 }, -}; - -static const struct dp_aud_n_m * -audio_config_dp_get_n_m(const struct intel_crtc_state *crtc_state, int rate) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(dp_aud_n_m); i++) { - if (rate == dp_aud_n_m[i].sample_rate && - crtc_state->port_clock == dp_aud_n_m[i].clock) - return &dp_aud_n_m[i]; - } - - return NULL; -} - static const struct { int clock; u32 config; @@ -387,47 +320,17 @@ hsw_dp_audio_config_update(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state) { struct drm_i915_private *i915 = to_i915(encoder->base.dev); - struct i915_audio_component *acomp = i915->display.audio.component; enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; - enum port port = encoder->port; - const struct dp_aud_n_m *nm; - int rate; - u32 tmp; - rate = acomp ? acomp->aud_sample_rate[port] : 0; - nm = audio_config_dp_get_n_m(crtc_state, rate); - if (nm) - drm_dbg_kms(&i915->drm, "using Maud %u, Naud %u\n", nm->m, - nm->n); - else - drm_dbg_kms(&i915->drm, "using automatic Maud, Naud\n"); + /* Enable time stamps. Let HW calculate Maud/Naud values */ + intel_de_rmw(i915, HSW_AUD_CFG(cpu_transcoder), + AUD_CONFIG_N_VALUE_INDEX | + AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK | + AUD_CONFIG_UPPER_N_MASK | + AUD_CONFIG_LOWER_N_MASK | + AUD_CONFIG_N_PROG_ENABLE, + AUD_CONFIG_N_VALUE_INDEX); - tmp = intel_de_read(i915, HSW_AUD_CFG(cpu_transcoder)); - tmp &= ~AUD_CONFIG_N_VALUE_INDEX; - tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK; - tmp &= ~AUD_CONFIG_N_PROG_ENABLE; - tmp |= AUD_CONFIG_N_VALUE_INDEX; - - if (nm) { - tmp &= ~AUD_CONFIG_N_MASK; - tmp |= AUD_CONFIG_N(nm->n); - tmp |= AUD_CONFIG_N_PROG_ENABLE; - } - - intel_de_write(i915, HSW_AUD_CFG(cpu_transcoder), tmp); - - tmp = intel_de_read(i915, HSW_AUD_M_CTS_ENABLE(cpu_transcoder)); - tmp &= ~AUD_CONFIG_M_MASK; - tmp &= ~AUD_M_CTS_M_VALUE_INDEX; - tmp &= ~AUD_M_CTS_M_PROG_ENABLE; - - if (nm) { - tmp |= nm->m; - tmp |= AUD_M_CTS_M_VALUE_INDEX; - tmp |= AUD_M_CTS_M_PROG_ENABLE; - } - - intel_de_write(i915, HSW_AUD_M_CTS_ENABLE(cpu_transcoder), tmp); } static void From 43b26bdd2ee5cfca80939be910d5b23a50cd7f9d Mon Sep 17 00:00:00 2001 From: Karthikeyan Ramasubramanian Date: Wed, 21 Feb 2024 18:06:24 -0700 Subject: [PATCH 05/18] drm/i915/bios: Fix parsing backlight BDB data MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Starting BDB version 239, hdr_dpcd_refresh_timeout is introduced to backlight BDB data. Commit 700034566d68 ("drm/i915/bios: Define more BDB contents") updated the backlight BDB data accordingly. This broke the parsing of backlight BDB data in VBT for versions 236 - 238 (both inclusive) and hence the backlight controls are not responding on units with the concerned BDB version. backlight_control information has been present in backlight BDB data from at least BDB version 191 onwards, if not before. Hence this patch extracts the backlight_control information for BDB version 191 or newer. Tested on Chromebooks using Jasperlake SoC (reports bdb->version = 236). Tested on Chromebooks using Raptorlake SoC (reports bdb->version = 251). v2: removed checking the block size of the backlight BDB data [vsyrjala: this is completely safe thanks to commit e163cfb4c96d ("drm/i915/bios: Make copies of VBT data blocks")] Fixes: 700034566d68 ("drm/i915/bios: Define more BDB contents") Cc: stable@vger.kernel.org Cc: Jani Nikula Cc: Ville Syrjälä Signed-off-by: Karthikeyan Ramasubramanian Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20240221180622.v2.1.I0690aa3e96a83a43b3fc33f50395d334b2981826@changeid Signed-off-by: Ville Syrjälä (cherry picked from commit c286f6a973c66c0d993ecab9f7162c790e7064c8) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_bios.c | 19 ++++--------------- drivers/gpu/drm/i915/display/intel_vbt_defs.h | 5 ----- 2 files changed, 4 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c index 52bd3576835b..7d1e443f97b9 100644 --- a/drivers/gpu/drm/i915/display/intel_bios.c +++ b/drivers/gpu/drm/i915/display/intel_bios.c @@ -1042,22 +1042,11 @@ parse_lfp_backlight(struct drm_i915_private *i915, panel->vbt.backlight.type = INTEL_BACKLIGHT_DISPLAY_DDI; panel->vbt.backlight.controller = 0; if (i915->display.vbt.version >= 191) { - size_t exp_size; + const struct lfp_backlight_control_method *method; - if (i915->display.vbt.version >= 236) - exp_size = sizeof(struct bdb_lfp_backlight_data); - else if (i915->display.vbt.version >= 234) - exp_size = EXP_BDB_LFP_BL_DATA_SIZE_REV_234; - else - exp_size = EXP_BDB_LFP_BL_DATA_SIZE_REV_191; - - if (get_blocksize(backlight_data) >= exp_size) { - const struct lfp_backlight_control_method *method; - - method = &backlight_data->backlight_control[panel_type]; - panel->vbt.backlight.type = method->type; - panel->vbt.backlight.controller = method->controller; - } + method = &backlight_data->backlight_control[panel_type]; + panel->vbt.backlight.type = method->type; + panel->vbt.backlight.controller = method->controller; } panel->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz; diff --git a/drivers/gpu/drm/i915/display/intel_vbt_defs.h b/drivers/gpu/drm/i915/display/intel_vbt_defs.h index a9f44abfc9fc..b50cd0dcabda 100644 --- a/drivers/gpu/drm/i915/display/intel_vbt_defs.h +++ b/drivers/gpu/drm/i915/display/intel_vbt_defs.h @@ -897,11 +897,6 @@ struct lfp_brightness_level { u16 reserved; } __packed; -#define EXP_BDB_LFP_BL_DATA_SIZE_REV_191 \ - offsetof(struct bdb_lfp_backlight_data, brightness_level) -#define EXP_BDB_LFP_BL_DATA_SIZE_REV_234 \ - offsetof(struct bdb_lfp_backlight_data, brightness_precision_bits) - struct bdb_lfp_backlight_data { u8 entry_size; struct lfp_backlight_data_entry data[16]; From 6897204ea3df808d342c8e4613135728bc538bcd Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Thu, 2 May 2024 15:32:35 -0700 Subject: [PATCH 06/18] drm/connector: Add \n to message about demoting connector force-probes The debug print clearly lacks a \n at the end. Add it. Fixes: 8f86c82aba8b ("drm/connector: demote connector force-probes for non-master clients") Reviewed-by: Abhinav Kumar Reviewed-by: Simon Ser Reviewed-by: Dmitry Baryshkov Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20240502153234.1.I2052f01c8d209d9ae9c300b87c6e4f60bd3cc99e@changeid --- drivers/gpu/drm/drm_connector.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index b0516505f7ae..4d2df7f64dc5 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -2940,7 +2940,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, dev->mode_config.max_width, dev->mode_config.max_height); else - drm_dbg_kms(dev, "User-space requested a forced probe on [CONNECTOR:%d:%s] but is not the DRM master, demoting to read-only probe", + drm_dbg_kms(dev, "User-space requested a forced probe on [CONNECTOR:%d:%s] but is not the DRM master, demoting to read-only probe\n", connector->base.id, connector->name); } From 284f141f5ce5f416c336e1539eb3a6d74c51fe6e Mon Sep 17 00:00:00 2001 From: Nicholas Susanto Date: Wed, 24 Apr 2024 13:34:11 -0400 Subject: [PATCH 07/18] drm/amd/display: Enable urgent latency adjustments for DCN35 [Why] Underflow occurs when running Netflix in a 4k144 eDP + 4k60 HDMI FRL setup. It is caused by latency varying based on the DCFCLK/FCLK state. [How] Enable urgent latency adjustment and match the reference to existing ASIC that also see increased latency at low FCLK. Reviewed-by: Nicholas Kazlauskas Acked-by: Tom Chung Signed-off-by: Nicholas Susanto Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c index 21e0eef3269b..53e40d3c48d4 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c @@ -195,9 +195,9 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_5_soc = { .dcn_downspread_percent = 0.5, .gpuvm_min_page_size_bytes = 4096, .hostvm_min_page_size_bytes = 4096, - .do_urgent_latency_adjustment = 0, + .do_urgent_latency_adjustment = 1, .urgent_latency_adjustment_fabric_clock_component_us = 0, - .urgent_latency_adjustment_fabric_clock_reference_mhz = 0, + .urgent_latency_adjustment_fabric_clock_reference_mhz = 3000, }; void dcn35_build_wm_range_table_fpu(struct clk_mgr *clk_mgr) From 3f0b5af17575c95457538335750c630014d1fa6a Mon Sep 17 00:00:00 2001 From: Agustin Gutierrez Date: Fri, 19 Apr 2024 13:53:52 -0400 Subject: [PATCH 08/18] drm/amd/display: Fix DSC-re-computing [Why] This fixes a bug introduced by commit c53655545141 ("drm/amd/display: dsc mst re-compute pbn for changes on hub"). The change caused light-up issues with a second display that required DSC on some MST docks. [How] Use Virtual DPCD for DSC caps in MST case. [Limitations] This change only affects MST DSC devices that follow specifications additional changes are required to check for old MST DSC devices such as ones which do not check for Virtual DPCD registers. Reviewed-by: Swapnil Patel Reviewed-by: Hersen Wu Acked-by: Tom Chung Signed-off-by: Agustin Gutierrez Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- .../display/amdgpu_dm/amdgpu_dm_mst_types.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index 941e96f100f4..f0322e730214 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -1219,10 +1219,6 @@ static bool is_dsc_need_re_compute( if (dc_link->type != dc_connection_mst_branch) return false; - if (!(dc_link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_SUPPORT || - dc_link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_PASSTHROUGH_SUPPORT)) - return false; - for (i = 0; i < MAX_PIPES; i++) stream_on_link[i] = NULL; @@ -1240,7 +1236,19 @@ static bool is_dsc_need_re_compute( continue; aconnector = (struct amdgpu_dm_connector *) stream->dm_stream_context; - if (!aconnector) + if (!aconnector || !aconnector->dsc_aux) + continue; + + /* + * Check if cached virtual MST DSC caps are available and DSC is supported + * this change takes care of newer MST DSC capable devices that report their + * DPCD caps as per specifications in their Virtual DPCD registers. + + * TODO: implement the check for older MST DSC devices that do not conform to + * specifications. + */ + if (!(aconnector->dc_sink->dsc_caps.dsc_dec_caps.is_dsc_supported || + aconnector->dc_link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_PASSTHROUGH_SUPPORT)) continue; stream_on_link[new_stream_on_link_num] = aconnector; From b436f1cbed9c59d89ce63bd3b81b0e603c29d466 Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Thu, 25 Apr 2024 11:26:59 -0400 Subject: [PATCH 09/18] drm/amd/display: Fix idle optimization checks for multi-display and dual eDP [Why] Idle optimizations are blocked if there's more than one eDP connector on the board - blocking S0i3 and IPS2 for static screen. [How] Fix the checks to correctly detect number of active eDP. Also restrict the eDP support to panels that have correct feature support. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu Acked-by: Tom Chung Signed-off-by: Nicholas Kazlauskas Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- .../amd/display/dc/hwss/dcn35/dcn35_hwseq.c | 33 +++++++++++++++---- 1 file changed, 27 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c index a5560b3fc39b..9067ca78f851 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c @@ -638,22 +638,43 @@ void dcn35_power_down_on_boot(struct dc *dc) bool dcn35_apply_idle_power_optimizations(struct dc *dc, bool enable) { - struct dc_link *edp_links[MAX_NUM_EDP]; - int i, edp_num; if (dc->debug.dmcub_emulation) return true; if (enable) { - dc_get_edp_links(dc, edp_links, &edp_num); - if (edp_num == 0 || edp_num > 1) - return false; + uint32_t num_active_edp = 0; + int i; for (i = 0; i < dc->current_state->stream_count; ++i) { struct dc_stream_state *stream = dc->current_state->streams[i]; + struct dc_link *link = stream->link; + bool is_psr = link && !link->panel_config.psr.disable_psr && + (link->psr_settings.psr_version == DC_PSR_VERSION_1 || + link->psr_settings.psr_version == DC_PSR_VERSION_SU_1); + bool is_replay = link && link->replay_settings.replay_feature_enabled; - if (!stream->dpms_off && !dc_is_embedded_signal(stream->signal)) + /* Ignore streams that disabled. */ + if (stream->dpms_off) + continue; + + /* Active external displays block idle optimizations. */ + if (!dc_is_embedded_signal(stream->signal)) return false; + + /* If not PWRSEQ0 can't enter idle optimizations */ + if (link && link->link_index != 0) + return false; + + /* Check for panel power features required for idle optimizations. */ + if (!is_psr && !is_replay) + return false; + + num_active_edp += 1; } + + /* If more than one active eDP then disallow. */ + if (num_active_edp > 1) + return false; } // TODO: review other cases when idle optimization is allowed From cf37a5318dd68aa0eb909e210aebd219bc0ff64a Mon Sep 17 00:00:00 2001 From: Agustin Gutierrez Date: Thu, 25 Apr 2024 10:37:36 -0400 Subject: [PATCH 10/18] drm/amd/display: MST DSC check for older devices [Why] Some older MST hubs do not report DPCD registers according to specification. [How] This change re-applies commit c53655545141 ("drm/amd/display: dsc mst re-compute pbn for changes on hub"). With an additional check for these older MST devices. Reviewed-by: Swapnil Patel Acked-by: Tom Chung Signed-off-by: Agustin Gutierrez Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index f0322e730214..cb31a699c662 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -1219,6 +1219,12 @@ static bool is_dsc_need_re_compute( if (dc_link->type != dc_connection_mst_branch) return false; + /* add a check for older MST DSC with no virtual DPCDs */ + if (needs_dsc_aux_workaround(dc_link) && + (!(dc_link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_SUPPORT || + dc_link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_PASSTHROUGH_SUPPORT))) + return false; + for (i = 0; i < MAX_PIPES; i++) stream_on_link[i] = NULL; @@ -1240,12 +1246,8 @@ static bool is_dsc_need_re_compute( continue; /* - * Check if cached virtual MST DSC caps are available and DSC is supported - * this change takes care of newer MST DSC capable devices that report their - * DPCD caps as per specifications in their Virtual DPCD registers. - - * TODO: implement the check for older MST DSC devices that do not conform to - * specifications. + * check if cached virtual MST DSC caps are available and DSC is supported + * as per specifications in their Virtual DPCD registers. */ if (!(aconnector->dc_sink->dsc_caps.dsc_dec_caps.is_dsc_supported || aconnector->dc_link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_PASSTHROUGH_SUPPORT)) From cd94d1b182d2986378550c9087571991bfee01d4 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Thu, 2 May 2024 13:32:17 -0500 Subject: [PATCH 11/18] dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users Limit the workaround introduced by commit 31729e8c21ec ("drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11") to only run in the s4 path. Cc: Tim Huang Fixes: 31729e8c21ec ("drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3351 Signed-off-by: Mario Limonciello Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c index 949131bd1ecb..4abfcd32747d 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c @@ -226,7 +226,7 @@ static int smu_v13_0_4_system_features_control(struct smu_context *smu, bool en) struct amdgpu_device *adev = smu->adev; int ret = 0; - if (!en && !adev->in_s0ix) { + if (!en && adev->in_s4) { /* Adds a GFX reset as workaround just before sending the * MP1_UNLOAD message to prevent GC/RLC/PMFW from entering * an invalid state. From eb2077fa09363a87e3b940c964187aa5db16e070 Mon Sep 17 00:00:00 2001 From: Lijo Lazar Date: Tue, 23 Apr 2024 16:52:40 +0530 Subject: [PATCH 12/18] Revert "drm/amdkfd: Add partition id field to location_id" This reverts commit c37ce764cd492f044dcdbb39616298f02b0dbc7f. RCCL library is currently not treating spatial partitions differently, hence this change is causing issues. Revert temporarily till RCCL implementation is ready for spatial partitions. Signed-off-by: Lijo Lazar Reviewed-by: Jonathan Kim Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c index c51f131eaa2f..bc9eb847ecfe 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c @@ -1997,9 +1997,8 @@ int kfd_topology_add_device(struct kfd_node *gpu) HSA_CAP_ASIC_REVISION_MASK); dev->node_props.location_id = pci_dev_id(gpu->adev->pdev); - /* On multi-partition nodes, node id = location_id[31:28] */ - if (gpu->kfd->num_nodes > 1) - dev->node_props.location_id |= (dev->gpu->node_id << 28); + if (KFD_GC_VERSION(dev->gpu->kfd) == IP_VERSION(9, 4, 3)) + dev->node_props.location_id |= dev->gpu->node_id; dev->node_props.domain = pci_domain_nr(gpu->adev->pdev->bus); dev->node_props.max_engine_clk_fcompute = From 2d4b74a619de70e1b87683fa2fa23affa5315f7f Mon Sep 17 00:00:00 2001 From: Lucas De Marchi Date: Mon, 6 May 2024 07:19:17 -0700 Subject: [PATCH 13/18] drm/xe/ads: Use flexible-array Zero-length arrays are deprecated and flexible arrays should be used instead: https://www.kernel.org/doc/html/v6.9-rc7/process/deprecated.html#zero-length-and-one-element-arrays Reported-by: kernel test robot Reported-by: Julia Lawall Closes: https://lore.kernel.org/r/202405051824.AmjAI5Pg-lkp@intel.com/ Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Matthew Brost Reviewed-by: Matthew Brost Link: https://patchwork.freedesktop.org/patch/msgid/20240506141917.205714-1-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi (cherry picked from commit ee7284230644e21fef0e38fc5bf8f907b6bb7f7c) Signed-off-by: Lucas De Marchi --- drivers/gpu/drm/xe/xe_guc_ads.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/xe/xe_guc_ads.c b/drivers/gpu/drm/xe/xe_guc_ads.c index 6ad4c1a90a78..5339f8a49004 100644 --- a/drivers/gpu/drm/xe/xe_guc_ads.c +++ b/drivers/gpu/drm/xe/xe_guc_ads.c @@ -100,7 +100,7 @@ struct __guc_ads_blob { struct guc_engine_usage engine_usage; struct guc_um_init_params um_init_params; /* From here on, location is dynamic! Refer to above diagram. */ - struct guc_mmio_reg regset[0]; + struct guc_mmio_reg regset[]; } __packed; #define ads_blob_read(ads_, field_) \ From 7bd9c9f962eb36d5b88bbe4108d368aad3500c05 Mon Sep 17 00:00:00 2001 From: Daniele Ceraolo Spurio Date: Thu, 21 Mar 2024 12:55:12 -0700 Subject: [PATCH 14/18] drm/xe/guc: Check error code when initializing the CT mutex The initialization via drmm_mutex_init can fail, so we need to check the return code and escalate the failure. The mutex initialization has been moved after all the other init steps that can't fail, so we're always guaranteed to have those done and don't have to check in the cleanup code. Signed-off-by: Daniele Ceraolo Spurio Reviewed-by: Vinay Belgaumkar Link: https://patchwork.freedesktop.org/patch/msgid/20240321195512.274210-1-daniele.ceraolospurio@intel.com (cherry picked from commit b4abeb5545bb3ddcdda3c19067680ad0b2259be4) Signed-off-by: Lucas De Marchi --- drivers/gpu/drm/xe/xe_guc_ct.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/xe/xe_guc_ct.c b/drivers/gpu/drm/xe/xe_guc_ct.c index 7f32547f94b2..c62dbd6420db 100644 --- a/drivers/gpu/drm/xe/xe_guc_ct.c +++ b/drivers/gpu/drm/xe/xe_guc_ct.c @@ -145,13 +145,16 @@ int xe_guc_ct_init(struct xe_guc_ct *ct) xe_assert(xe, !(guc_ct_size() % PAGE_SIZE)); - drmm_mutex_init(&xe->drm, &ct->lock); spin_lock_init(&ct->fast_lock); xa_init(&ct->fence_lookup); INIT_WORK(&ct->g2h_worker, g2h_worker_func); init_waitqueue_head(&ct->wq); init_waitqueue_head(&ct->g2h_fence_wq); + err = drmm_mutex_init(&xe->drm, &ct->lock); + if (err) + return err; + primelockdep(ct); bo = xe_managed_bo_create_pin_map(xe, tile, guc_ct_size(), From c002bfe644a29ba600c571f2abba13a155a12dcd Mon Sep 17 00:00:00 2001 From: Matthew Brost Date: Sun, 5 May 2024 20:47:58 -0700 Subject: [PATCH 15/18] drm/xe: Use ordered WQ for G2H handler System work queues are shared, use a dedicated work queue for G2H processing to avoid G2H processing getting block behind system tasks. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Signed-off-by: Matthew Brost Reviewed-by: Francois Dugast Link: https://patchwork.freedesktop.org/patch/msgid/20240506034758.3697397-1-matthew.brost@intel.com (cherry picked from commit 50aec9665e0babd62b9eee4e613d9a1ef8d2b7de) Signed-off-by: Lucas De Marchi --- drivers/gpu/drm/xe/xe_guc_ct.c | 5 +++++ drivers/gpu/drm/xe/xe_guc_ct.h | 2 +- drivers/gpu/drm/xe/xe_guc_ct_types.h | 2 ++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/xe/xe_guc_ct.c b/drivers/gpu/drm/xe/xe_guc_ct.c index c62dbd6420db..8bbfa45798e2 100644 --- a/drivers/gpu/drm/xe/xe_guc_ct.c +++ b/drivers/gpu/drm/xe/xe_guc_ct.c @@ -120,6 +120,7 @@ static void guc_ct_fini(struct drm_device *drm, void *arg) { struct xe_guc_ct *ct = arg; + destroy_workqueue(ct->g2h_wq); xa_destroy(&ct->fence_lookup); } @@ -145,6 +146,10 @@ int xe_guc_ct_init(struct xe_guc_ct *ct) xe_assert(xe, !(guc_ct_size() % PAGE_SIZE)); + ct->g2h_wq = alloc_ordered_workqueue("xe-g2h-wq", 0); + if (!ct->g2h_wq) + return -ENOMEM; + spin_lock_init(&ct->fast_lock); xa_init(&ct->fence_lookup); INIT_WORK(&ct->g2h_worker, g2h_worker_func); diff --git a/drivers/gpu/drm/xe/xe_guc_ct.h b/drivers/gpu/drm/xe/xe_guc_ct.h index 5083e099064f..105bb8e99a8d 100644 --- a/drivers/gpu/drm/xe/xe_guc_ct.h +++ b/drivers/gpu/drm/xe/xe_guc_ct.h @@ -34,7 +34,7 @@ static inline void xe_guc_ct_irq_handler(struct xe_guc_ct *ct) return; wake_up_all(&ct->wq); - queue_work(system_unbound_wq, &ct->g2h_worker); + queue_work(ct->g2h_wq, &ct->g2h_worker); xe_guc_ct_fast_path(ct); } diff --git a/drivers/gpu/drm/xe/xe_guc_ct_types.h b/drivers/gpu/drm/xe/xe_guc_ct_types.h index d29144c9f20b..fede4c6e93cb 100644 --- a/drivers/gpu/drm/xe/xe_guc_ct_types.h +++ b/drivers/gpu/drm/xe/xe_guc_ct_types.h @@ -120,6 +120,8 @@ struct xe_guc_ct { wait_queue_head_t wq; /** @g2h_fence_wq: wait queue used for G2H fencing */ wait_queue_head_t g2h_fence_wq; + /** @g2h_wq: used to process G2H */ + struct workqueue_struct *g2h_wq; /** @msg: Message buffer */ u32 msg[GUC_CTB_MSG_MAX_LEN]; /** @fast_msg: Message buffer */ From be4a2a81b6b90d1a47eaeaace4cc8e2cb57b96c7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Sun, 14 Apr 2024 13:06:39 -0400 Subject: [PATCH 16/18] drm/amdkfd: don't allow mapping the MMIO HDP page with large pages We don't get the right offset in that case. The GPU has an unused 4K area of the register BAR space into which you can remap registers. We remap the HDP flush registers into this space to allow userspace (CPU or GPU) to flush the HDP when it updates VRAM. However, on systems with >4K pages, we end up exposing PAGE_SIZE of MMIO space. Fixes: d8e408a82704 ("drm/amdkfd: Expose HDP registers to user space") Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c index 55aa74cbc532..1e6cc0bfc432 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c @@ -1139,7 +1139,7 @@ static int kfd_ioctl_alloc_memory_of_gpu(struct file *filep, goto err_unlock; } offset = dev->adev->rmmio_remap.bus_addr; - if (!offset) { + if (!offset || (PAGE_SIZE > 4096)) { err = -ENOMEM; goto err_unlock; } @@ -2307,7 +2307,7 @@ static int criu_restore_memory_of_gpu(struct kfd_process_device *pdd, return -EINVAL; } offset = pdd->dev->adev->rmmio_remap.bus_addr; - if (!offset) { + if (!offset || (PAGE_SIZE > 4096)) { pr_err("amdgpu_amdkfd_get_mmio_remap_phys_addr failed\n"); return -ENOMEM; } @@ -3349,6 +3349,9 @@ static int kfd_mmio_mmap(struct kfd_node *dev, struct kfd_process *process, if (vma->vm_end - vma->vm_start != PAGE_SIZE) return -EINVAL; + if (PAGE_SIZE > 4096) + return -EINVAL; + address = dev->adev->rmmio_remap.bus_addr; vm_flags_set(vma, VM_IO | VM_DONTCOPY | VM_DONTEXPAND | VM_NORESERVE | From 8d2c930735f850e5be6860aeb39b27ac73ca192f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Wed, 8 May 2024 15:19:16 +0200 Subject: [PATCH 17/18] drm/amdgpu: Fix comparison in amdgpu_res_cpu_visible MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It incorrectly claimed a resource isn't CPU visible if it's located at the very end of CPU visible VRAM. Fixes: a6ff969fe9cb ("drm/amdgpu: fix visible VRAM handling during faults") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3343 Reviewed-by: Christian König Reviewed-by: Alex Deucher Reported-and-Tested-by: Jeremy Day Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher CC: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c index 109fe557a02b..29c197c00018 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c @@ -427,7 +427,7 @@ bool amdgpu_res_cpu_visible(struct amdgpu_device *adev, amdgpu_res_first(res, 0, res->size, &cursor); while (cursor.remaining) { - if ((cursor.start + cursor.size) >= adev->gmc.visible_vram_size) + if ((cursor.start + cursor.size) > adev->gmc.visible_vram_size) return false; amdgpu_res_next(&cursor, cursor.size); } From a222a6470d7eea91193946e8162066fa88da64c2 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sat, 11 May 2024 07:01:31 +1000 Subject: [PATCH 18/18] Revert "drm/nouveau/firmware: Fix SG_DEBUG error with nvkm_firmware_ctor()" This reverts commit 52a6947bf576b97ff8e14bb0a31c5eaf2d0d96e2. This causes loading failures in [ 0.367379] nouveau 0000:01:00.0: NVIDIA GP104 (134000a1) [ 0.474499] nouveau 0000:01:00.0: bios: version 86.04.50.80.13 [ 0.474620] nouveau 0000:01:00.0: pmu: firmware unavailable [ 0.474977] nouveau 0000:01:00.0: fb: 8192 MiB GDDR5 [ 0.484371] nouveau 0000:01:00.0: sec2(acr): mbox 00000001 00000000 [ 0.484377] nouveau 0000:01:00.0: sec2(acr):load: boot failed: -5 [ 0.484379] nouveau 0000:01:00.0: acr: init failed, -5 [ 0.484466] nouveau 0000:01:00.0: init failed with -5 [ 0.484468] nouveau: DRM-master:00000000:00000080: init failed with -5 [ 0.484470] nouveau 0000:01:00.0: DRM-master: Device allocation failed: -5 [ 0.485078] nouveau 0000:01:00.0: probe with driver nouveau failed with error -50 I tried tracking it down but ran out of time this week, will revisit next week. Reported-by: Dan Moulding Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nvkm/core/firmware.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/core/firmware.c b/drivers/gpu/drm/nouveau/nvkm/core/firmware.c index 141b0a513bf5..adc60b25f8e6 100644 --- a/drivers/gpu/drm/nouveau/nvkm/core/firmware.c +++ b/drivers/gpu/drm/nouveau/nvkm/core/firmware.c @@ -205,9 +205,7 @@ nvkm_firmware_dtor(struct nvkm_firmware *fw) break; case NVKM_FIRMWARE_IMG_DMA: nvkm_memory_unref(&memory); - dma_unmap_single(fw->device->dev, fw->phys, sg_dma_len(&fw->mem.sgl), - DMA_TO_DEVICE); - kfree(fw->img); + dma_free_coherent(fw->device->dev, sg_dma_len(&fw->mem.sgl), fw->img, fw->phys); break; case NVKM_FIRMWARE_IMG_SGT: nvkm_memory_unref(&memory); @@ -237,17 +235,14 @@ nvkm_firmware_ctor(const struct nvkm_firmware_func *func, const char *name, fw->img = kmemdup(src, fw->len, GFP_KERNEL); break; case NVKM_FIRMWARE_IMG_DMA: { + dma_addr_t addr; + len = ALIGN(fw->len, PAGE_SIZE); - fw->img = kmalloc(len, GFP_KERNEL); - if (!fw->img) - return -ENOMEM; - - memcpy(fw->img, src, fw->len); - fw->phys = dma_map_single(fw->device->dev, fw->img, len, DMA_TO_DEVICE); - if (dma_mapping_error(fw->device->dev, fw->phys)) { - kfree(fw->img); - return -EFAULT; + fw->img = dma_alloc_coherent(fw->device->dev, len, &addr, GFP_KERNEL); + if (fw->img) { + memcpy(fw->img, src, fw->len); + fw->phys = addr; } sg_init_one(&fw->mem.sgl, fw->img, len);