Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

net/mptcp/protocol.c
  adf1bb78da ("mptcp: fix snd_wnd initialization for passive socket")
  9426ce476a ("mptcp: annotate lockless access for RX path fields")
https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/

Adjacent changes:

drivers/dpll/dpll_core.c
  0d60d8df6f ("dpll: rely on rcu for netdev_dpll_pin()")
  e7f8df0e81 ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order")

drivers/net/veth.c
  1ce7d306ea ("veth: try harder when allocating queue memory")
  0bef512012 ("net: add netdev_lockdep_set_classes() to virtual drivers")

drivers/net/wireless/intel/iwlwifi/mvm/d3.c
  8c9bef26e9 ("wifi: iwlwifi: mvm: d3: implement suspend with MLO")
  78f65fbf42 ("wifi: iwlwifi: mvm: ensure offloading TID queue exists")

net/wireless/nl80211.c
  f78c137533 ("wifi: nl80211: reject iftype change with mesh ID change")
  414532d8aa ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
Jakub Kicinski 2024-02-29 14:17:54 -08:00
commit 65f5dd4f02
403 changed files with 3942 additions and 2102 deletions

View File

@ -553,6 +553,7 @@ Senthilkumar N L <quic_snlakshm@quicinc.com> <snlakshm@codeaurora.org>
Serge Hallyn <sergeh@kernel.org> <serge.hallyn@canonical.com>
Serge Hallyn <sergeh@kernel.org> <serue@us.ibm.com>
Seth Forshee <sforshee@kernel.org> <seth.forshee@canonical.com>
Shakeel Butt <shakeel.butt@linux.dev> <shakeelb@google.com>
Shannon Nelson <shannon.nelson@amd.com> <snelson@pensando.io>
Shannon Nelson <shannon.nelson@amd.com> <shannon.nelson@intel.com>
Shannon Nelson <shannon.nelson@amd.com> <shannon.nelson@oracle.com>

View File

@ -95,6 +95,9 @@ The kernel provides a function to invoke the buffer clearing:
mds_clear_cpu_buffers()
Also macro CLEAR_CPU_BUFFERS can be used in ASM late in exit-to-user path.
Other than CFLAGS.ZF, this macro doesn't clobber any registers.
The mitigation is invoked on kernel/userspace, hypervisor/guest and C-state
(idle) transitions.
@ -138,17 +141,30 @@ Mitigation points
When transitioning from kernel to user space the CPU buffers are flushed
on affected CPUs when the mitigation is not disabled on the kernel
command line. The migitation is enabled through the static key
mds_user_clear.
command line. The mitigation is enabled through the feature flag
X86_FEATURE_CLEAR_CPU_BUF.
The mitigation is invoked in prepare_exit_to_usermode() which covers
all but one of the kernel to user space transitions. The exception
is when we return from a Non Maskable Interrupt (NMI), which is
handled directly in do_nmi().
The mitigation is invoked just before transitioning to userspace after
user registers are restored. This is done to minimize the window in
which kernel data could be accessed after VERW e.g. via an NMI after
VERW.
(The reason that NMI is special is that prepare_exit_to_usermode() can
enable IRQs. In NMI context, NMIs are blocked, and we don't want to
enable IRQs with NMIs blocked.)
**Corner case not handled**
Interrupts returning to kernel don't clear CPUs buffers since the
exit-to-user path is expected to do that anyways. But, there could be
a case when an NMI is generated in kernel after the exit-to-user path
has cleared the buffers. This case is not handled and NMI returning to
kernel don't clear CPU buffers because:
1. It is rare to get an NMI after VERW, but before returning to userspace.
2. For an unprivileged user, there is no known way to make that NMI
less rare or target it.
3. It would take a large number of these precisely-timed NMIs to mount
an actual attack. There's presumably not enough bandwidth.
4. The NMI in question occurs after a VERW, i.e. when user state is
restored and most interesting data is already scrubbed. Whats left
is only the data that NMI touches, and that may or may not be of
any interest.
2. C-State transition

View File

@ -388,6 +388,12 @@ latex_elements = {
verbatimhintsturnover=false,
''',
#
# Some of our authors are fond of deep nesting; tell latex to
# cope.
#
'maxlistdepth': '10',
# For CJK One-half spacing, need to be in front of hyperref
'extrapackages': r'\usepackage{setspace}',

View File

@ -85,8 +85,8 @@ allOf:
clock-names:
items:
- const: dout_cmu_misc_bus
- const: dout_cmu_misc_sss
- const: bus
- const: sss
additionalProperties: false

View File

@ -1,9 +1,9 @@
.. SPDX-License-Identifier: GPL-2.0
.. Copyright (C) 2023 Google LLC
=====================================================
inet_connection_sock struct fast path usage breakdown
=====================================================
==========================================
inet_sock struct fast path usage breakdown
==========================================
Type Name fastpath_tx_access fastpath_rx_access comment
..struct ..inet_sock

View File

@ -29,10 +29,7 @@ all_languages = {
}
class LanguagesNode(nodes.Element):
def __init__(self, current_language, *args, **kwargs):
super().__init__(*args, **kwargs)
self.current_language = current_language
pass
class TranslationsTransform(Transform):
default_priority = 900
@ -49,7 +46,8 @@ class TranslationsTransform(Transform):
# normalize docname to be the untranslated one
docname = os.path.join(*components[2:])
new_nodes = LanguagesNode(all_languages[this_lang_code])
new_nodes = LanguagesNode()
new_nodes['current_language'] = all_languages[this_lang_code]
for lang_code, lang_name in all_languages.items():
if lang_code == this_lang_code:
@ -84,7 +82,7 @@ def process_languages(app, doctree, docname):
html_content = app.builder.templates.render('translations.html',
context={
'current_language': node.current_language,
'current_language': node['current_language'],
'languages': languages,
})

View File

@ -5381,7 +5381,7 @@ CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)
M: Johannes Weiner <hannes@cmpxchg.org>
M: Michal Hocko <mhocko@kernel.org>
M: Roman Gushchin <roman.gushchin@linux.dev>
M: Shakeel Butt <shakeelb@google.com>
M: Shakeel Butt <shakeel.butt@linux.dev>
R: Muchun Song <muchun.song@linux.dev>
L: cgroups@vger.kernel.org
L: linux-mm@kvack.org
@ -14130,6 +14130,17 @@ F: mm/
F: tools/mm/
F: tools/testing/selftests/mm/
MEMORY MAPPING
M: Andrew Morton <akpm@linux-foundation.org>
R: Liam R. Howlett <Liam.Howlett@oracle.com>
R: Vlastimil Babka <vbabka@suse.cz>
R: Lorenzo Stoakes <lstoakes@gmail.com>
L: linux-mm@kvack.org
S: Maintained
W: http://www.linux-mm.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
F: mm/mmap.c
MEMORY TECHNOLOGY DEVICES (MTD)
M: Miquel Raynal <miquel.raynal@bootlin.com>
M: Richard Weinberger <richard@nod.at>
@ -14388,7 +14399,7 @@ MICROCHIP MCP16502 PMIC DRIVER
M: Claudiu Beznea <claudiu.beznea@tuxon.dev>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
F: Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml
F: drivers/regulator/mcp16502.c
MICROCHIP MCP3564 ADC DRIVER
@ -18004,33 +18015,34 @@ F: drivers/media/tuners/qt1010*
QUALCOMM ATH12K WIRELESS DRIVER
M: Kalle Valo <kvalo@kernel.org>
M: Jeff Johnson <quic_jjohnson@quicinc.com>
M: Jeff Johnson <jjohnson@kernel.org>
L: ath12k@lists.infradead.org
S: Supported
W: https://wireless.wiki.kernel.org/en/users/Drivers/ath12k
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
F: drivers/net/wireless/ath/ath12k/
N: ath12k
QUALCOMM ATHEROS ATH10K WIRELESS DRIVER
M: Kalle Valo <kvalo@kernel.org>
M: Jeff Johnson <quic_jjohnson@quicinc.com>
M: Jeff Johnson <jjohnson@kernel.org>
L: ath10k@lists.infradead.org
S: Supported
W: https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
F: Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
F: drivers/net/wireless/ath/ath10k/
N: ath10k
QUALCOMM ATHEROS ATH11K WIRELESS DRIVER
M: Kalle Valo <kvalo@kernel.org>
M: Jeff Johnson <quic_jjohnson@quicinc.com>
M: Jeff Johnson <jjohnson@kernel.org>
L: ath11k@lists.infradead.org
S: Supported
W: https://wireless.wiki.kernel.org/en/users/Drivers/ath11k
B: https://wireless.wiki.kernel.org/en/users/Drivers/ath11k/bugreport
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
F: Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
F: drivers/net/wireless/ath/ath11k/
N: ath11k
QUALCOMM ATHEROS ATH9K WIRELESS DRIVER
M: Toke Høiland-Jørgensen <toke@toke.dk>
@ -22907,9 +22919,8 @@ S: Maintained
F: drivers/usb/typec/mux/pi3usb30532.c
USB TYPEC PORT CONTROLLER DRIVERS
M: Guenter Roeck <linux@roeck-us.net>
L: linux-usb@vger.kernel.org
S: Maintained
S: Orphan
F: drivers/usb/typec/tcpm/
USB UHCI DRIVER

View File

@ -2,7 +2,7 @@
VERSION = 6
PATCHLEVEL = 8
SUBLEVEL = 0
EXTRAVERSION = -rc5
EXTRAVERSION = -rc6
NAME = Hurr durr I'ma ninja sloth
# *DOCUMENTATION*

View File

@ -167,7 +167,6 @@
msix: msix@fbe00000 {
compatible = "al,alpine-msix";
reg = <0x0 0xfbe00000 0x0 0x100000>;
interrupt-controller;
msi-controller;
al,msi-base-spi = <96>;
al,msi-num-spis = <64>;

View File

@ -466,7 +466,6 @@
i2c0: i2c-bus@40 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x40 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@ -482,7 +481,6 @@
i2c1: i2c-bus@80 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@ -498,7 +496,6 @@
i2c2: i2c-bus@c0 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0xc0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@ -515,7 +512,6 @@
i2c3: i2c-bus@100 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x100 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@ -532,7 +528,6 @@
i2c4: i2c-bus@140 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x140 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@ -549,7 +544,6 @@
i2c5: i2c-bus@180 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x180 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@ -566,7 +560,6 @@
i2c6: i2c-bus@1c0 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x1c0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@ -583,7 +576,6 @@
i2c7: i2c-bus@300 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x300 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@ -600,7 +592,6 @@
i2c8: i2c-bus@340 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x340 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@ -617,7 +608,6 @@
i2c9: i2c-bus@380 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x380 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@ -634,7 +624,6 @@
i2c10: i2c-bus@3c0 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x3c0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@ -651,7 +640,6 @@
i2c11: i2c-bus@400 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x400 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@ -668,7 +656,6 @@
i2c12: i2c-bus@440 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x440 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@ -685,7 +672,6 @@
i2c13: i2c-bus@480 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x480 0x40>;
compatible = "aspeed,ast2400-i2c-bus";

View File

@ -363,6 +363,7 @@
interrupts = <40>;
reg = <0x1e780200 0x0100>;
clocks = <&syscon ASPEED_CLK_APB>;
#interrupt-cells = <2>;
interrupt-controller;
bus-frequency = <12000000>;
pinctrl-names = "default";
@ -594,7 +595,6 @@
i2c0: i2c-bus@40 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x40 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@ -610,7 +610,6 @@
i2c1: i2c-bus@80 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@ -626,7 +625,6 @@
i2c2: i2c-bus@c0 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0xc0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@ -643,7 +641,6 @@
i2c3: i2c-bus@100 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x100 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@ -660,7 +657,6 @@
i2c4: i2c-bus@140 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x140 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@ -677,7 +673,6 @@
i2c5: i2c-bus@180 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x180 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@ -694,7 +689,6 @@
i2c6: i2c-bus@1c0 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x1c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@ -711,7 +705,6 @@
i2c7: i2c-bus@300 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x300 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@ -728,7 +721,6 @@
i2c8: i2c-bus@340 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x340 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@ -745,7 +737,6 @@
i2c9: i2c-bus@380 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x380 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@ -762,7 +753,6 @@
i2c10: i2c-bus@3c0 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x3c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@ -779,7 +769,6 @@
i2c11: i2c-bus@400 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x400 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@ -796,7 +785,6 @@
i2c12: i2c-bus@440 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x440 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@ -813,7 +801,6 @@
i2c13: i2c-bus@480 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x480 0x40>;
compatible = "aspeed,ast2500-i2c-bus";

View File

@ -474,6 +474,7 @@
reg = <0x1e780500 0x100>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_APB2>;
#interrupt-cells = <2>;
interrupt-controller;
bus-frequency = <12000000>;
pinctrl-names = "default";
@ -488,6 +489,7 @@
reg = <0x1e780600 0x100>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_APB2>;
#interrupt-cells = <2>;
interrupt-controller;
bus-frequency = <12000000>;
pinctrl-names = "default";
@ -902,7 +904,6 @@
i2c0: i2c-bus@80 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@ -917,7 +918,6 @@
i2c1: i2c-bus@100 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x100 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@ -932,7 +932,6 @@
i2c2: i2c-bus@180 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x180 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@ -947,7 +946,6 @@
i2c3: i2c-bus@200 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x200 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@ -962,7 +960,6 @@
i2c4: i2c-bus@280 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x280 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@ -977,7 +974,6 @@
i2c5: i2c-bus@300 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x300 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@ -992,7 +988,6 @@
i2c6: i2c-bus@380 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x380 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@ -1007,7 +1002,6 @@
i2c7: i2c-bus@400 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x400 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@ -1022,7 +1016,6 @@
i2c8: i2c-bus@480 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x480 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@ -1037,7 +1030,6 @@
i2c9: i2c-bus@500 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x500 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@ -1052,7 +1044,6 @@
i2c10: i2c-bus@580 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x580 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@ -1067,7 +1058,6 @@
i2c11: i2c-bus@600 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x600 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@ -1082,7 +1072,6 @@
i2c12: i2c-bus@680 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x680 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@ -1097,7 +1086,6 @@
i2c13: i2c-bus@700 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x700 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@ -1112,7 +1100,6 @@
i2c14: i2c-bus@780 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x780 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@ -1127,7 +1114,6 @@
i2c15: i2c-bus@800 {
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
reg = <0x800 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;

View File

@ -167,6 +167,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&mailbox>;
interrupts = <0>;
};
@ -247,6 +248,7 @@
gpio-controller;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
};
i2c1: i2c@1800b000 {
@ -518,6 +520,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 42 1>,
<&pinctrl 1 44 3>,

View File

@ -200,6 +200,7 @@
gpio-controller;
ngpios = <4>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
};

View File

@ -180,6 +180,7 @@
gpio-controller;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 0 32>;
};
@ -352,6 +353,7 @@
gpio-controller;
ngpios = <4>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
};

View File

@ -60,6 +60,8 @@
* We have slots (IDSEL) 1 and 2 with one assigned IRQ
* each handling all IRQs.
*/
#interrupt-cells = <1>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map =
/* IDSEL 1 */
<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */

View File

@ -89,6 +89,8 @@
* The slots have Ethernet, Ethernet, NEC and MPCI.
* The IDSELs are 11, 12, 13, 14.
*/
#interrupt-cells = <1>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map =
/* IDSEL 11 - Ethernet A */
<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */

View File

@ -65,6 +65,7 @@
gpio2: gpio-expander@20 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
interrupt-controller;
compatible = "semtech,sx1505q";
reg = <0x20>;
@ -79,6 +80,7 @@
gpio3: gpio-expander@21 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
interrupt-controller;
compatible = "semtech,sx1505q";
reg = <0x21>;

View File

@ -120,6 +120,7 @@
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
<3 IRQ_TYPE_LEVEL_HIGH>,
<4 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
};
@ -128,6 +129,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
};

View File

@ -997,7 +997,6 @@
compatible = "st,stmpe811";
reg = <0x41>;
irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
interrupt-controller;
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;

View File

@ -980,7 +980,6 @@
compatible = "st,stmpe811";
reg = <0x41>;
irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
interrupt-controller;
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;

View File

@ -861,7 +861,6 @@
compatible = "st,stmpe811";
reg = <0x41>;
irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
interrupt-controller;
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;

View File

@ -227,7 +227,6 @@
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
bridge@2,1 {
compatible = "pci10b5,8605";
@ -235,7 +234,6 @@
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
/* Intel Corporation I210 Gigabit Network Connection */
ethernet@3,0 {
@ -250,7 +248,6 @@
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
/* Intel Corporation I210 Gigabit Network Connection */
switch_nic: ethernet@4,0 {

View File

@ -245,6 +245,7 @@
reg = <0x74>;
gpio-controller;
#gpio-cells = <2>;
#interrupt-cells = <2>;
interrupt-controller;
interrupt-parent = <&gpio2>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@ -390,7 +391,6 @@
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
};
};

View File

@ -626,7 +626,6 @@
blocks = <0x5>;
id = <0>;
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
interrupt-parent = <&gpio4>;
irq-trigger = <0x1>;
pinctrl-names = "default";

View File

@ -550,7 +550,6 @@
blocks = <0x5>;
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio6>;
interrupt-controller;
id = <0>;
irq-trigger = <0x1>;
pinctrl-names = "default";

View File

@ -225,7 +225,6 @@
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio2>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
onkey {
compatible = "dlg,da9063-onkey";

View File

@ -124,6 +124,7 @@
reg = <0x58>;
interrupt-parent = <&gpio2>;
interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
#interrupt-cells = <2>;
interrupt-controller;
regulators {

View File

@ -100,6 +100,7 @@
interrupt-parent = <&gpio1>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;

View File

@ -63,6 +63,7 @@
gpio-controller;
#gpio-cells = <2>;
#interrupt-cells = <2>;
interrupt-controller;
reg = <0x25>;
};

View File

@ -338,6 +338,7 @@
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
#interrupt-cells = <2>;
interrupt-controller;
interrupt-parent = <&gpio3>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;

View File

@ -340,10 +340,10 @@
"msi8";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_PIPE_CLK>,
<&gcc GCC_PCIE_AUX_CLK>,

View File

@ -447,6 +447,7 @@
interrupt-parent = <&irqc0>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
rtc {
compatible = "dlg,da9063-rtc";

View File

@ -347,6 +347,7 @@
interrupt-parent = <&irqc0>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
onkey {
compatible = "dlg,da9063-onkey";

View File

@ -819,6 +819,7 @@
interrupt-parent = <&irqc0>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
rtc {
compatible = "dlg,da9063-rtc";

View File

@ -413,6 +413,7 @@
interrupt-parent = <&irqc0>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
watchdog {
compatible = "dlg,da9063-watchdog";

View File

@ -381,6 +381,7 @@
interrupt-parent = <&irqc>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
rtc {
compatible = "dlg,da9063-rtc";

View File

@ -759,6 +759,7 @@
interrupt-parent = <&irqc0>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
rtc {
compatible = "dlg,da9063-rtc";

View File

@ -453,6 +453,7 @@
interrupt-parent = <&gpio3>;
interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
rtc {
compatible = "dlg,da9063-rtc";

View File

@ -439,6 +439,7 @@
interrupt-parent = <&gpio3>;
interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
onkey {
compatible = "dlg,da9063-onkey";

View File

@ -196,7 +196,6 @@
pwm4: pwm@10280000 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280000 0x10>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@ -208,7 +207,6 @@
pwm5: pwm@10280010 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280010 0x10>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@ -220,7 +218,6 @@
pwm6: pwm@10280020 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280020 0x10>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@ -232,7 +229,6 @@
pwm7: pwm@10280030 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280030 0x10>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@ -386,7 +382,6 @@
pwm0: pwm@20040000 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040000 0x10>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@ -398,7 +393,6 @@
pwm1: pwm@20040010 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040010 0x10>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@ -410,7 +404,6 @@
pwm2: pwm@20040020 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040020 0x10>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@ -422,7 +415,6 @@
pwm3: pwm@20040030 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040030 0x10>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";

View File

@ -222,7 +222,6 @@
reg = <0x42>;
interrupts = <8 3>;
interrupt-parent = <&gpioi>;
interrupt-controller;
wakeup-source;
stmpegpio: stmpe_gpio {

View File

@ -64,7 +64,6 @@
reg = <0x38>;
interrupts = <2 2>;
interrupt-parent = <&gpiof>;
interrupt-controller;
touchscreen-size-x = <480>;
touchscreen-size-y = <800>;
status = "okay";

View File

@ -415,7 +415,6 @@
reg = <0x41>;
interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio2>;
interrupt-controller;
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;

View File

@ -339,6 +339,7 @@ static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
GPIO_LOOKUP_IDX("G", 0, NULL, 1,
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
{ }
},
};

View File

@ -145,7 +145,6 @@
msix: msix@fbe00000 {
compatible = "al,alpine-msix";
reg = <0x0 0xfbe00000 0x0 0x100000>;
interrupt-controller;
msi-controller;
al,msi-base-spi = <160>;
al,msi-num-spis = <160>;

View File

@ -355,7 +355,6 @@
msix: msix@fbe00000 {
compatible = "al,alpine-msix";
reg = <0x0 0xfbe00000 0x0 0x100000>;
interrupt-controller;
msi-controller;
al,msi-base-spi = <336>;
al,msi-num-spis = <959>;

View File

@ -586,6 +586,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
};

View File

@ -450,6 +450,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinmux 0 0 16>,
<&pinmux 16 71 2>,

View File

@ -20,23 +20,41 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb
DTC_FLAGS_fsl-ls1088a-qds := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
DTC_FLAGS_fsl-ls1088a-rdb := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
DTC_FLAGS_fsl-ls1088a-ten64 := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
DTC_FLAGS_fsl-ls1088a-tqmls1088a-mbls10xxa := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-tqmls1088a-mbls10xxa.dtb
DTC_FLAGS_fsl-ls2080a-qds := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
DTC_FLAGS_fsl-ls2080a-rdb := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
DTC_FLAGS_fsl-ls2081a-rdb := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
DTC_FLAGS_fsl-ls2080a-simu := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
DTC_FLAGS_fsl-ls2088a-qds := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
DTC_FLAGS_fsl-ls2088a-rdb := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
DTC_FLAGS_fsl-lx2160a-bluebox3 := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3.dtb
DTC_FLAGS_fsl-lx2160a-bluebox3-rev-a := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3-rev-a.dtb
DTC_FLAGS_fsl-lx2160a-clearfog-cx := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb
DTC_FLAGS_fsl-lx2160a-honeycomb := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
DTC_FLAGS_fsl-lx2160a-qds := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
DTC_FLAGS_fsl-lx2160a-rdb := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
DTC_FLAGS_fsl-lx2162a-clearfog := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-clearfog.dtb
DTC_FLAGS_fsl-lx2162a-qds := -Wno-interrupt_map
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb
fsl-ls1028a-qds-13bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-13bb.dtbo
@ -53,6 +71,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
DTC_FLAGS_fsl-lx2160a-tqmlx2160a-mblx2160a := -Wno-interrupt_map
fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo

View File

@ -128,17 +128,12 @@
pinctrl-0 = <&pinctrl_ptn5150>;
status = "okay";
connector {
compatible = "usb-c-connector";
label = "USB-C";
port {
typec1_dr_sw: endpoint {
remote-endpoint = <&usb1_drd_sw>;
};
};
};
};
};
&i2c3 {

View File

@ -486,7 +486,7 @@
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
status = "disabled";
};
&usb3_phy0 {

View File

@ -175,17 +175,13 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ptn5150>;
connector {
compatible = "usb-c-connector";
label = "USB-C";
port {
ptn5150_out_ep: endpoint {
remote-endpoint = <&dwc3_0_ep>;
};
};
};
};
power-sensor@40 {
compatible = "ti,ina238";

View File

@ -184,6 +184,13 @@
enable-active-high;
};
reg_vcc_1v8: regulator-1v8 {
compatible = "regulator-fixed";
regulator-name = "VCC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
reg_vcc_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
@ -480,7 +487,7 @@
clock-names = "mclk";
clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
iov-supply = <&reg_vcc_3v3>;
iov-supply = <&reg_vcc_1v8>;
ldoin-supply = <&reg_vcc_3v3>;
};

View File

@ -126,7 +126,6 @@
amba {
#address-cells = <2>;
#size-cells = <1>;
#interrupt-cells = <3>;
compatible = "simple-bus";
interrupt-parent = <&gic>;

View File

@ -126,7 +126,6 @@
amba {
#address-cells = <2>;
#size-cells = <1>;
#interrupt-cells = <3>;
compatible = "simple-bus";
interrupt-parent = <&gic>;

View File

@ -138,7 +138,6 @@
odmi: odmi@300000 {
compatible = "marvell,odmi-controller";
interrupt-controller;
msi-controller;
marvell,odmi-frames = <4>;
reg = <0x300000 0x4000>,

View File

@ -128,6 +128,7 @@
compatible = "mediatek,mt6360";
reg = <0x34>;
interrupt-controller;
#interrupt-cells = <1>;
interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
interrupt-names = "IRQB";

View File

@ -830,10 +830,10 @@
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
<&gcc GCC_PCIE0_AXI_M_CLK>,

View File

@ -814,13 +814,13 @@
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 142
interrupt-map = <0 0 0 1 &intc 0 0 142
IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 143
<0 0 0 2 &intc 0 0 143
IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 144
<0 0 0 3 &intc 0 0 144
IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 145
<0 0 0 4 &intc 0 0 145
IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@ -876,13 +876,13 @@
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 75
interrupt-map = <0 0 0 1 &intc 0 0 75
IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 78
<0 0 0 2 &intc 0 0 78
IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 79
<0 0 0 3 &intc 0 0 79
IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 83
<0 0 0 4 &intc 0 0 83
IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,

View File

@ -234,6 +234,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&gpio6>;
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
@ -294,6 +295,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&gpio6>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
};
@ -314,6 +316,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&gpio7>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
};
@ -324,6 +327,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&gpio5>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
};

View File

@ -631,6 +631,7 @@
clock-names = "spiclk", "apb_pclk";
dmas = <&dmac 12>, <&dmac 13>;
dma-names = "tx", "rx";
num-cs = <2>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
#address-cells = <1>;
@ -646,6 +647,7 @@
clock-names = "spiclk", "apb_pclk";
dmas = <&dmac 14>, <&dmac 15>;
dma-names = "tx", "rx";
num-cs = <2>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
#address-cells = <1>;

View File

@ -488,7 +488,6 @@
pwm3: pwm@ff1b0030 {
compatible = "rockchip,rk3328-pwm";
reg = <0x0 0xff1b0030 0x0 0x10>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";

View File

@ -72,7 +72,7 @@
vin-supply = <&vcc3v3_sys>;
};
vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
vcc5v0_usb_host1: vcc5v0_usb_host2: vcc5v0-usb-host-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_host";
regulator-boot-on;
@ -114,6 +114,7 @@
status = "okay";
};
/* Standard pcie */
&pcie3x2 {
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_sys>;
@ -122,6 +123,7 @@
/* M.2 M-Key ssd */
&pcie3x4 {
num-lanes = <2>;
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_sys>;
status = "okay";
@ -188,12 +190,12 @@
};
&u2phy2_host {
phy-supply = <&vcc5v0_usb30_host>;
phy-supply = <&vcc5v0_usb_host1>;
status = "okay";
};
&u2phy3_host {
phy-supply = <&vcc5v0_usb30_host>;
phy-supply = <&vcc5v0_usb_host2>;
status = "okay";
};

View File

@ -16,8 +16,8 @@
aliases {
mmc0 = &sdhci;
mmc1 = &sdio;
mmc2 = &sdmmc;
mmc1 = &sdmmc;
mmc2 = &sdio;
serial2 = &uart2;
};

View File

@ -448,6 +448,7 @@
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
pinctrl-names = "default";
spi-max-frequency = <1000000>;
system-power-controller;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;

View File

@ -62,7 +62,6 @@
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led1_pin>;
status = "okay";
/* LED1 on PCB */
led-1 {

View File

@ -189,19 +189,19 @@
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_b0{
&cpu_b0 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b1{
&cpu_b1 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b2{
&cpu_b2 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_b3{
&cpu_b3 {
cpu-supply = <&vdd_cpu_big1_s0>;
};

View File

@ -19,8 +19,8 @@
aliases {
mmc0 = &sdhci;
mmc1 = &sdio;
mmc2 = &sdmmc;
mmc1 = &sdmmc;
mmc2 = &sdio;
};
analog-sound {

View File

@ -195,13 +195,13 @@
&gpio1 {
gpio-line-names = /* GPIO1 A0-A7 */
"HEADER_27_3v3", "HEADER_28_3v3", "", "",
"HEADER_27_3v3", "", "", "",
"HEADER_29_1v8", "", "HEADER_7_1v8", "",
/* GPIO1 B0-B7 */
"", "HEADER_31_1v8", "HEADER_33_1v8", "",
"HEADER_11_1v8", "HEADER_13_1v8", "", "",
/* GPIO1 C0-C7 */
"", "", "", "",
"", "HEADER_28_3v3", "", "",
"", "", "", "",
/* GPIO1 D0-D7 */
"", "", "", "",
@ -225,11 +225,11 @@
&gpio4 {
gpio-line-names = /* GPIO4 A0-A7 */
"", "", "HEADER_37_3v3", "HEADER_32_3v3",
"HEADER_36_3v3", "", "HEADER_35_3v3", "HEADER_38_3v3",
"", "", "HEADER_37_3v3", "HEADER_8_3v3",
"HEADER_10_3v3", "", "HEADER_32_3v3", "HEADER_35_3v3",
/* GPIO4 B0-B7 */
"", "", "", "HEADER_40_3v3",
"HEADER_8_3v3", "HEADER_10_3v3", "", "",
"HEADER_38_3v3", "HEADER_36_3v3", "", "",
/* GPIO4 C0-C7 */
"", "", "", "",
"", "", "", "",

View File

@ -227,8 +227,19 @@ static int ctr_encrypt(struct skcipher_request *req)
src += blocks * AES_BLOCK_SIZE;
}
if (nbytes && walk.nbytes == walk.total) {
u8 buf[AES_BLOCK_SIZE];
u8 *d = dst;
if (unlikely(nbytes < AES_BLOCK_SIZE))
src = dst = memcpy(buf + sizeof(buf) - nbytes,
src, nbytes);
neon_aes_ctr_encrypt(dst, src, ctx->enc, ctx->key.rounds,
nbytes, walk.iv);
if (unlikely(nbytes < AES_BLOCK_SIZE))
memcpy(d, dst, nbytes);
nbytes = 0;
}
kernel_neon_end();

View File

@ -386,6 +386,7 @@ extern void sme_alloc(struct task_struct *task, bool flush);
extern unsigned int sme_get_vl(void);
extern int sme_set_current_vl(unsigned long arg);
extern int sme_get_current_vl(void);
extern void sme_suspend_exit(void);
/*
* Return how many bytes of memory are required to store the full SME
@ -421,6 +422,7 @@ static inline int sme_max_vl(void) { return 0; }
static inline int sme_max_virtualisable_vl(void) { return 0; }
static inline int sme_set_current_vl(unsigned long arg) { return -EINVAL; }
static inline int sme_get_current_vl(void) { return -EINVAL; }
static inline void sme_suspend_exit(void) { }
static inline size_t sme_state_size(struct task_struct const *task)
{

View File

@ -15,10 +15,6 @@
#define JUMP_LABEL_NOP_SIZE AARCH64_INSN_SIZE
/*
* Prefer the constraint "S" to support PIC with GCC. Clang before 19 does not
* support "S" on a symbol with a constant offset, so we use "i" as a fallback.
*/
static __always_inline bool arch_static_branch(struct static_key * const key,
const bool branch)
{
@ -27,9 +23,9 @@ static __always_inline bool arch_static_branch(struct static_key * const key,
" .pushsection __jump_table, \"aw\" \n\t"
" .align 3 \n\t"
" .long 1b - ., %l[l_yes] - . \n\t"
" .quad (%[key] - .) + %[bit0] \n\t"
" .quad %c0 - . \n\t"
" .popsection \n\t"
: : [key]"Si"(key), [bit0]"i"(branch) : : l_yes);
: : "i"(&((char *)key)[branch]) : : l_yes);
return false;
l_yes:
@ -44,9 +40,9 @@ static __always_inline bool arch_static_branch_jump(struct static_key * const ke
" .pushsection __jump_table, \"aw\" \n\t"
" .align 3 \n\t"
" .long 1b - ., %l[l_yes] - . \n\t"
" .quad (%[key] - .) + %[bit0] \n\t"
" .quad %c0 - . \n\t"
" .popsection \n\t"
: : [key]"Si"(key), [bit0]"i"(branch) : : l_yes);
: : "i"(&((char *)key)[branch]) : : l_yes);
return false;
l_yes:

View File

@ -1311,6 +1311,22 @@ void __init sme_setup(void)
get_sme_default_vl());
}
void sme_suspend_exit(void)
{
u64 smcr = 0;
if (!system_supports_sme())
return;
if (system_supports_fa64())
smcr |= SMCR_ELx_FA64;
if (system_supports_sme2())
smcr |= SMCR_ELx_EZT0;
write_sysreg_s(smcr, SYS_SMCR_EL1);
write_sysreg_s(0, SYS_SMPRI_EL1);
}
#endif /* CONFIG_ARM64_SME */
static void sve_init_regs(void)

View File

@ -12,6 +12,7 @@
#include <asm/daifflags.h>
#include <asm/debug-monitors.h>
#include <asm/exec.h>
#include <asm/fpsimd.h>
#include <asm/mte.h>
#include <asm/memory.h>
#include <asm/mmu_context.h>
@ -80,6 +81,8 @@ void notrace __cpu_suspend_exit(void)
*/
spectre_v4_enable_mitigation(NULL);
sme_suspend_exit();
/* Restore additional feature-specific configuration */
ptrauth_suspend_exit();
}

View File

@ -60,7 +60,7 @@
#address-cells = <1>;
#size-cells = <0>;
eeprom@57{
eeprom@57 {
compatible = "atmel,24c16";
reg = <0x57>;
pagesize = <16>;

View File

@ -78,7 +78,7 @@
#address-cells = <1>;
#size-cells = <0>;
eeprom@57{
eeprom@57 {
compatible = "atmel,24c16";
reg = <0x57>;
pagesize = <16>;

View File

@ -357,6 +357,8 @@ void __init platform_init(void)
acpi_gbl_use_default_register_widths = false;
acpi_boot_table_init();
#endif
early_init_fdt_scan_reserved_mem();
unflatten_and_copy_device_tree();
#ifdef CONFIG_NUMA
@ -390,8 +392,6 @@ static void __init arch_mem_init(char **cmdline_p)
check_kernel_sections_mem();
early_init_fdt_scan_reserved_mem();
/*
* In order to reduce the possibility of kernel panic when failed to
* get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate

View File

@ -88,6 +88,73 @@ void show_ipi_list(struct seq_file *p, int prec)
}
}
static inline void set_cpu_core_map(int cpu)
{
int i;
cpumask_set_cpu(cpu, &cpu_core_setup_map);
for_each_cpu(i, &cpu_core_setup_map) {
if (cpu_data[cpu].package == cpu_data[i].package) {
cpumask_set_cpu(i, &cpu_core_map[cpu]);
cpumask_set_cpu(cpu, &cpu_core_map[i]);
}
}
}
static inline void set_cpu_sibling_map(int cpu)
{
int i;
cpumask_set_cpu(cpu, &cpu_sibling_setup_map);
for_each_cpu(i, &cpu_sibling_setup_map) {
if (cpus_are_siblings(cpu, i)) {
cpumask_set_cpu(i, &cpu_sibling_map[cpu]);
cpumask_set_cpu(cpu, &cpu_sibling_map[i]);
}
}
}
static inline void clear_cpu_sibling_map(int cpu)
{
int i;
for_each_cpu(i, &cpu_sibling_setup_map) {
if (cpus_are_siblings(cpu, i)) {
cpumask_clear_cpu(i, &cpu_sibling_map[cpu]);
cpumask_clear_cpu(cpu, &cpu_sibling_map[i]);
}
}
cpumask_clear_cpu(cpu, &cpu_sibling_setup_map);
}
/*
* Calculate a new cpu_foreign_map mask whenever a
* new cpu appears or disappears.
*/
void calculate_cpu_foreign_map(void)
{
int i, k, core_present;
cpumask_t temp_foreign_map;
/* Re-calculate the mask */
cpumask_clear(&temp_foreign_map);
for_each_online_cpu(i) {
core_present = 0;
for_each_cpu(k, &temp_foreign_map)
if (cpus_are_siblings(i, k))
core_present = 1;
if (!core_present)
cpumask_set_cpu(i, &temp_foreign_map);
}
for_each_online_cpu(i)
cpumask_andnot(&cpu_foreign_map[i],
&temp_foreign_map, &cpu_sibling_map[i]);
}
/* Send mailbox buffer via Mail_Send */
static void csr_mail_send(uint64_t data, int cpu, int mailbox)
{
@ -303,6 +370,7 @@ int loongson_cpu_disable(void)
numa_remove_cpu(cpu);
#endif
set_cpu_online(cpu, false);
clear_cpu_sibling_map(cpu);
calculate_cpu_foreign_map();
local_irq_save(flags);
irq_migrate_all_off_this_cpu();
@ -337,6 +405,7 @@ void __noreturn arch_cpu_idle_dead(void)
addr = iocsr_read64(LOONGARCH_IOCSR_MBUF0);
} while (addr == 0);
local_irq_disable();
init_fn = (void *)TO_CACHE(addr);
iocsr_write32(0xffffffff, LOONGARCH_IOCSR_IPI_CLEAR);
@ -379,59 +448,6 @@ static int __init ipi_pm_init(void)
core_initcall(ipi_pm_init);
#endif
static inline void set_cpu_sibling_map(int cpu)
{
int i;
cpumask_set_cpu(cpu, &cpu_sibling_setup_map);
for_each_cpu(i, &cpu_sibling_setup_map) {
if (cpus_are_siblings(cpu, i)) {
cpumask_set_cpu(i, &cpu_sibling_map[cpu]);
cpumask_set_cpu(cpu, &cpu_sibling_map[i]);
}
}
}
static inline void set_cpu_core_map(int cpu)
{
int i;
cpumask_set_cpu(cpu, &cpu_core_setup_map);
for_each_cpu(i, &cpu_core_setup_map) {
if (cpu_data[cpu].package == cpu_data[i].package) {
cpumask_set_cpu(i, &cpu_core_map[cpu]);
cpumask_set_cpu(cpu, &cpu_core_map[i]);
}
}
}
/*
* Calculate a new cpu_foreign_map mask whenever a
* new cpu appears or disappears.
*/
void calculate_cpu_foreign_map(void)
{
int i, k, core_present;
cpumask_t temp_foreign_map;
/* Re-calculate the mask */
cpumask_clear(&temp_foreign_map);
for_each_online_cpu(i) {
core_present = 0;
for_each_cpu(k, &temp_foreign_map)
if (cpus_are_siblings(i, k))
core_present = 1;
if (!core_present)
cpumask_set_cpu(i, &temp_foreign_map);
}
for_each_online_cpu(i)
cpumask_andnot(&cpu_foreign_map[i],
&temp_foreign_map, &cpu_sibling_map[i]);
}
/* Preload SMP state for boot cpu */
void smp_prepare_boot_cpu(void)
{

View File

@ -298,74 +298,73 @@ static int _kvm_setcsr(struct kvm_vcpu *vcpu, unsigned int id, u64 val)
return ret;
}
static int _kvm_get_cpucfg(int id, u64 *v)
static int _kvm_get_cpucfg_mask(int id, u64 *v)
{
int ret = 0;
if (id < 0 && id >= KVM_MAX_CPUCFG_REGS)
if (id < 0 || id >= KVM_MAX_CPUCFG_REGS)
return -EINVAL;
switch (id) {
case 2:
/* Return CPUCFG2 features which have been supported by KVM */
/* CPUCFG2 features unconditionally supported by KVM */
*v = CPUCFG2_FP | CPUCFG2_FPSP | CPUCFG2_FPDP |
CPUCFG2_FPVERS | CPUCFG2_LLFTP | CPUCFG2_LLFTPREV |
CPUCFG2_LAM;
/*
* If LSX is supported by CPU, it is also supported by KVM,
* as we implement it.
* For the ISA extensions listed below, if one is supported
* by the host, then it is also supported by KVM.
*/
if (cpu_has_lsx)
*v |= CPUCFG2_LSX;
/*
* if LASX is supported by CPU, it is also supported by KVM,
* as we implement it.
*/
if (cpu_has_lasx)
*v |= CPUCFG2_LASX;
break;
return 0;
default:
ret = -EINVAL;
break;
/*
* No restrictions on other valid CPUCFG IDs' values, but
* CPUCFG data is limited to 32 bits as the LoongArch ISA
* manual says (Volume 1, Section 2.2.10.5 "CPUCFG").
*/
*v = U32_MAX;
return 0;
}
return ret;
}
static int kvm_check_cpucfg(int id, u64 val)
{
u64 mask;
int ret = 0;
int ret;
u64 mask = 0;
if (id < 0 && id >= KVM_MAX_CPUCFG_REGS)
return -EINVAL;
if (_kvm_get_cpucfg(id, &mask))
ret = _kvm_get_cpucfg_mask(id, &mask);
if (ret)
return ret;
if (val & ~mask)
/* Unsupported features and/or the higher 32 bits should not be set */
return -EINVAL;
switch (id) {
case 2:
/* CPUCFG2 features checking */
if (val & ~mask)
/* The unsupported features should not be set */
ret = -EINVAL;
else if (!(val & CPUCFG2_LLFTP))
/* The LLFTP must be set, as guest must has a constant timer */
ret = -EINVAL;
else if ((val & CPUCFG2_FP) && (!(val & CPUCFG2_FPSP) || !(val & CPUCFG2_FPDP)))
/* Single and double float point must both be set when enable FP */
ret = -EINVAL;
else if ((val & CPUCFG2_LSX) && !(val & CPUCFG2_FP))
/* FP should be set when enable LSX */
ret = -EINVAL;
else if ((val & CPUCFG2_LASX) && !(val & CPUCFG2_LSX))
/* LSX, FP should be set when enable LASX, and FP has been checked before. */
ret = -EINVAL;
break;
if (!(val & CPUCFG2_LLFTP))
/* Guests must have a constant timer */
return -EINVAL;
if ((val & CPUCFG2_FP) && (!(val & CPUCFG2_FPSP) || !(val & CPUCFG2_FPDP)))
/* Single and double float point must both be set when FP is enabled */
return -EINVAL;
if ((val & CPUCFG2_LSX) && !(val & CPUCFG2_FP))
/* LSX architecturally implies FP but val does not satisfy that */
return -EINVAL;
if ((val & CPUCFG2_LASX) && !(val & CPUCFG2_LSX))
/* LASX architecturally implies LSX and FP but val does not satisfy that */
return -EINVAL;
return 0;
default:
break;
/*
* Values for the other CPUCFG IDs are not being further validated
* besides the mask check above.
*/
return 0;
}
return ret;
}
static int kvm_get_one_reg(struct kvm_vcpu *vcpu,
@ -566,7 +565,7 @@ static int kvm_loongarch_get_cpucfg_attr(struct kvm_vcpu *vcpu,
uint64_t val;
uint64_t __user *uaddr = (uint64_t __user *)attr->addr;
ret = _kvm_get_cpucfg(attr->attr, &val);
ret = _kvm_get_cpucfg_mask(attr->attr, &val);
if (ret)
return ret;

View File

@ -10,9 +10,10 @@
#ifndef _PARISC_KPROBES_H
#define _PARISC_KPROBES_H
#include <asm-generic/kprobes.h>
#ifdef CONFIG_KPROBES
#include <asm-generic/kprobes.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/notifier.h>

View File

@ -78,7 +78,7 @@ asmlinkage void notrace __hot ftrace_function_trampoline(unsigned long parent,
#endif
}
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_FUNCTION_GRAPH_TRACER)
int ftrace_enable_ftrace_graph_caller(void)
{
static_key_enable(&ftrace_graph_enable.key);

View File

@ -172,7 +172,6 @@ static int __init processor_probe(struct parisc_device *dev)
p->cpu_num = cpu_info.cpu_num;
p->cpu_loc = cpu_info.cpu_loc;
set_cpu_possible(cpuid, true);
store_cpu_topology(cpuid);
#ifdef CONFIG_SMP
@ -474,13 +473,6 @@ static struct parisc_driver cpu_driver __refdata = {
*/
void __init processor_init(void)
{
unsigned int cpu;
reset_cpu_topology();
/* reset possible mask. We will mark those which are possible. */
for_each_possible_cpu(cpu)
set_cpu_possible(cpu, false);
register_parisc_driver(&cpu_driver);
}

View File

@ -228,10 +228,8 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
#ifdef CONFIG_IRQSTACKS
extern void * const _call_on_stack;
#endif /* CONFIG_IRQSTACKS */
void *ptr;
ptr = dereference_kernel_function_descriptor(&handle_interruption);
if (pc_is_kernel_fn(pc, ptr)) {
if (pc_is_kernel_fn(pc, handle_interruption)) {
struct pt_regs *regs = (struct pt_regs *)(info->sp - frame_size - PT_SZ_ALGN);
dbg("Unwinding through handle_interruption()\n");
info->prev_sp = regs->gr[30];
@ -239,13 +237,13 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
return 1;
}
if (pc_is_kernel_fn(pc, ret_from_kernel_thread) ||
pc_is_kernel_fn(pc, syscall_exit)) {
if (pc == (unsigned long)&ret_from_kernel_thread ||
pc == (unsigned long)&syscall_exit) {
info->prev_sp = info->prev_ip = 0;
return 1;
}
if (pc_is_kernel_fn(pc, intr_return)) {
if (pc == (unsigned long)&intr_return) {
struct pt_regs *regs;
dbg("Found intr_return()\n");
@ -257,14 +255,14 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
}
if (pc_is_kernel_fn(pc, _switch_to) ||
pc_is_kernel_fn(pc, _switch_to_ret)) {
pc == (unsigned long)&_switch_to_ret) {
info->prev_sp = info->sp - CALLEE_SAVE_FRAME_SIZE;
info->prev_ip = *(unsigned long *)(info->prev_sp - RP_OFFSET);
return 1;
}
#ifdef CONFIG_IRQSTACKS
if (pc_is_kernel_fn(pc, _call_on_stack)) {
if (pc == (unsigned long)&_call_on_stack) {
info->prev_sp = *(unsigned long *)(info->sp - FRAME_SIZE - REG_SZ);
info->prev_ip = *(unsigned long *)(info->sp - FRAME_SIZE - RP_OFFSET);
return 1;

View File

@ -30,6 +30,16 @@ void *pci_traverse_device_nodes(struct device_node *start,
void *data);
extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
#if defined(CONFIG_IOMMU_API) && (defined(CONFIG_PPC_PSERIES) || \
defined(CONFIG_PPC_POWERNV))
extern void ppc_iommu_register_device(struct pci_controller *phb);
extern void ppc_iommu_unregister_device(struct pci_controller *phb);
#else
static inline void ppc_iommu_register_device(struct pci_controller *phb) { }
static inline void ppc_iommu_unregister_device(struct pci_controller *phb) { }
#endif
/* From rtas_pci.h */
extern void init_pci_config_tokens (void);
extern unsigned long get_phb_buid (struct device_node *);

View File

@ -1360,7 +1360,7 @@ static struct iommu_device *spapr_tce_iommu_probe_device(struct device *dev)
struct pci_controller *hose;
if (!dev_is_pci(dev))
return ERR_PTR(-EPERM);
return ERR_PTR(-ENODEV);
pdev = to_pci_dev(dev);
hose = pdev->bus->sysdata;
@ -1409,6 +1409,21 @@ static const struct attribute_group *spapr_tce_iommu_groups[] = {
NULL,
};
void ppc_iommu_register_device(struct pci_controller *phb)
{
iommu_device_sysfs_add(&phb->iommu, phb->parent,
spapr_tce_iommu_groups, "iommu-phb%04x",
phb->global_number);
iommu_device_register(&phb->iommu, &spapr_tce_iommu_ops,
phb->parent);
}
void ppc_iommu_unregister_device(struct pci_controller *phb)
{
iommu_device_unregister(&phb->iommu);
iommu_device_sysfs_remove(&phb->iommu);
}
/*
* This registers IOMMU devices of PHBs. This needs to happen
* after core_initcall(iommu_init) + postcore_initcall(pci_driver_init) and
@ -1419,11 +1434,7 @@ static int __init spapr_tce_setup_phb_iommus_initcall(void)
struct pci_controller *hose;
list_for_each_entry(hose, &hose_list, list_node) {
iommu_device_sysfs_add(&hose->iommu, hose->parent,
spapr_tce_iommu_groups, "iommu-phb%04x",
hose->global_number);
iommu_device_register(&hose->iommu, &spapr_tce_iommu_ops,
hose->parent);
ppc_iommu_register_device(hose);
}
return 0;
}

View File

@ -391,6 +391,24 @@ static void kvmppc_set_pvr_hv(struct kvm_vcpu *vcpu, u32 pvr)
/* Dummy value used in computing PCR value below */
#define PCR_ARCH_31 (PCR_ARCH_300 << 1)
static inline unsigned long map_pcr_to_cap(unsigned long pcr)
{
unsigned long cap = 0;
switch (pcr) {
case PCR_ARCH_300:
cap = H_GUEST_CAP_POWER9;
break;
case PCR_ARCH_31:
cap = H_GUEST_CAP_POWER10;
break;
default:
break;
}
return cap;
}
static int kvmppc_set_arch_compat(struct kvm_vcpu *vcpu, u32 arch_compat)
{
unsigned long host_pcr_bit = 0, guest_pcr_bit = 0, cap = 0;
@ -424,11 +442,9 @@ static int kvmppc_set_arch_compat(struct kvm_vcpu *vcpu, u32 arch_compat)
break;
case PVR_ARCH_300:
guest_pcr_bit = PCR_ARCH_300;
cap = H_GUEST_CAP_POWER9;
break;
case PVR_ARCH_31:
guest_pcr_bit = PCR_ARCH_31;
cap = H_GUEST_CAP_POWER10;
break;
default:
return -EINVAL;
@ -440,6 +456,12 @@ static int kvmppc_set_arch_compat(struct kvm_vcpu *vcpu, u32 arch_compat)
return -EINVAL;
if (kvmhv_on_pseries() && kvmhv_is_nestedv2()) {
/*
* 'arch_compat == 0' would mean the guest should default to
* L1's compatibility. In this case, the guest would pick
* host's PCR and evaluate the corresponding capabilities.
*/
cap = map_pcr_to_cap(guest_pcr_bit);
if (!(cap & nested_capabilities))
return -EINVAL;
}

View File

@ -138,6 +138,7 @@ static int gs_msg_ops_vcpu_fill_info(struct kvmppc_gs_buff *gsb,
vector128 v;
int rc, i;
u16 iden;
u32 arch_compat = 0;
vcpu = gsm->data;
@ -347,8 +348,23 @@ static int gs_msg_ops_vcpu_fill_info(struct kvmppc_gs_buff *gsb,
break;
}
case KVMPPC_GSID_LOGICAL_PVR:
rc = kvmppc_gse_put_u32(gsb, iden,
vcpu->arch.vcore->arch_compat);
/*
* Though 'arch_compat == 0' would mean the default
* compatibility, arch_compat, being a Guest Wide
* Element, cannot be filled with a value of 0 in GSB
* as this would result into a kernel trap.
* Hence, when `arch_compat == 0`, arch_compat should
* default to L1's PVR.
*/
if (!vcpu->arch.vcore->arch_compat) {
if (cpu_has_feature(CPU_FTR_ARCH_31))
arch_compat = PVR_ARCH_31;
else if (cpu_has_feature(CPU_FTR_ARCH_300))
arch_compat = PVR_ARCH_300;
} else {
arch_compat = vcpu->arch.vcore->arch_compat;
}
rc = kvmppc_gse_put_u32(gsb, iden, arch_compat);
break;
}

View File

@ -35,6 +35,8 @@ struct pci_controller *init_phb_dynamic(struct device_node *dn)
pseries_msi_allocate_domains(phb);
ppc_iommu_register_device(phb);
/* Create EEH devices for the PHB */
eeh_phb_pe_create(phb);
@ -76,6 +78,8 @@ int remove_phb_dynamic(struct pci_controller *phb)
}
}
ppc_iommu_unregister_device(phb);
pseries_msi_free_domains(phb);
/* Keep a reference so phb isn't freed yet */

View File

@ -123,6 +123,7 @@
interrupt-parent = <&gpio>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
onkey {
compatible = "dlg,da9063-onkey";

View File

@ -96,14 +96,14 @@
thermal-sensors = <&sfctemp>;
trips {
cpu_alert0 {
cpu-alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit {
cpu-crit {
/* milliCelsius */
temperature = <90000>;
hysteresis = <2000>;
@ -113,28 +113,28 @@
};
};
osc_sys: osc_sys {
osc_sys: osc-sys {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
osc_aud: osc_aud {
osc_aud: osc-aud {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
gmac_rmii_ref: gmac_rmii_ref {
gmac_rmii_ref: gmac-rmii-ref {
compatible = "fixed-clock";
#clock-cells = <0>;
/* Should be overridden by the board when needed */
clock-frequency = <0>;
};
gmac_gr_mii_rxclk: gmac_gr_mii_rxclk {
gmac_gr_mii_rxclk: gmac-gr-mii-rxclk {
compatible = "fixed-clock";
#clock-cells = <0>;
/* Should be overridden by the board when needed */

View File

@ -237,14 +237,14 @@
};
trips {
cpu_alert0: cpu_alert0 {
cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit {
cpu-crit {
/* milliCelsius */
temperature = <100000>;
hysteresis = <2000>;

View File

@ -0,0 +1,3 @@
# Help: Enable compat support
CONFIG_COMPAT=y
CONFIG_COMPAT_32BIT_TIME=y

View File

@ -118,7 +118,6 @@ CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_SMC=m
CONFIG_SMC_DIAG=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@ -374,6 +373,7 @@ CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
@ -436,9 +436,6 @@ CONFIG_SCSI_DH_ALUA=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_BITMAP_FILE is not set
CONFIG_MD_LINEAR=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
CONFIG_BCACHE=m
CONFIG_BLK_DEV_DM=y
@ -637,7 +634,6 @@ CONFIG_FUSE_FS=y
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=m
CONFIG_OVERLAY_FS=m
CONFIG_NETFS_SUPPORT=m
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
CONFIG_CACHEFILES=m
@ -709,7 +705,6 @@ CONFIG_IMA_DEFAULT_HASH_SHA256=y
CONFIG_IMA_WRITE_POLICY=y
CONFIG_IMA_APPRAISE=y
CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor"
CONFIG_INIT_STACK_NONE=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
@ -739,7 +734,6 @@ CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_HCTR2=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_LRW=m

View File

@ -109,7 +109,6 @@ CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_SMC=m
CONFIG_SMC_DIAG=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@ -364,6 +363,7 @@ CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
@ -426,9 +426,6 @@ CONFIG_SCSI_DH_ALUA=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_BITMAP_FILE is not set
CONFIG_MD_LINEAR=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
CONFIG_BCACHE=m
CONFIG_BLK_DEV_DM=y
@ -622,7 +619,6 @@ CONFIG_FUSE_FS=y
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=m
CONFIG_OVERLAY_FS=m
CONFIG_NETFS_SUPPORT=m
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
CONFIG_CACHEFILES=m
@ -693,7 +689,6 @@ CONFIG_IMA_DEFAULT_HASH_SHA256=y
CONFIG_IMA_WRITE_POLICY=y
CONFIG_IMA_APPRAISE=y
CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor"
CONFIG_INIT_STACK_NONE=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_USER=m
@ -724,11 +719,9 @@ CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_HCTR2=m
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_CHACHA20POLY1305=m

View File

@ -8,6 +8,7 @@ CONFIG_BPF_SYSCALL=y
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_MARCH_Z13=y
CONFIG_NR_CPUS=2
@ -64,7 +65,6 @@ CONFIG_ZFCP=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_LSM="yama,loadpin,safesetid,integrity"
CONFIG_INIT_STACK_NONE=y
# CONFIG_ZLIB_DFLTCC is not set
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_PRINTK_TIME=y

View File

@ -252,7 +252,7 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
/* combine single writes by using store-block insn */
void __iowrite64_copy(void __iomem *to, const void *from, size_t count)
{
zpci_memcpy_toio(to, from, count);
zpci_memcpy_toio(to, from, count * 8);
}
void __iomem *ioremap_prot(phys_addr_t phys_addr, size_t size,

View File

@ -60,7 +60,7 @@ libs-y += arch/sparc/prom/
libs-y += arch/sparc/lib/
drivers-$(CONFIG_PM) += arch/sparc/power/
drivers-$(CONFIG_FB) += arch/sparc/video/
drivers-$(CONFIG_FB_CORE) += arch/sparc/video/
boot := arch/sparc/boot

View File

@ -1,3 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_FB) += fbdev.o
obj-$(CONFIG_FB_CORE) += fbdev.o

View File

@ -6,6 +6,9 @@
#include <linux/export.h>
#include <linux/linkage.h>
#include <asm/msr-index.h>
#include <asm/unwind_hints.h>
#include <asm/segment.h>
#include <asm/cache.h>
.pushsection .noinstr.text, "ax"
@ -20,3 +23,23 @@ SYM_FUNC_END(entry_ibpb)
EXPORT_SYMBOL_GPL(entry_ibpb);
.popsection
/*
* Define the VERW operand that is disguised as entry code so that
* it can be referenced with KPTI enabled. This ensure VERW can be
* used late in exit-to-user path after page tables are switched.
*/
.pushsection .entry.text, "ax"
.align L1_CACHE_BYTES, 0xcc
SYM_CODE_START_NOALIGN(mds_verw_sel)
UNWIND_HINT_UNDEFINED
ANNOTATE_NOENDBR
.word __KERNEL_DS
.align L1_CACHE_BYTES, 0xcc
SYM_CODE_END(mds_verw_sel);
/* For KVM */
EXPORT_SYMBOL_GPL(mds_verw_sel);
.popsection

Some files were not shown because too many files have changed in this diff Show More