kernel-aes67/drivers/char/tlclk.c

929 lines
23 KiB
C
Raw Normal View History

/*
* Telecom Clock driver for Intel NetStructure(tm) MPCBL0010
*
* Copyright (C) 2005 Kontron Canada
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <sebastien.bouchard@ca.kontron.com> and the current
* Maintainer <mark.gross@intel.com>
*
* Description : This is the TELECOM CLOCK module driver for the ATCA
* MPCBL0010 ATCA computer.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h> /* printk() */
#include <linux/fs.h> /* everything... */
#include <linux/errno.h> /* error codes */
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
#include <linux/sysfs.h>
#include <linux/device.h>
#include <linux/miscdevice.h>
#include <linux/platform_device.h>
#include <asm/io.h> /* inb/outb */
#include <asm/uaccess.h>
MODULE_AUTHOR("Sebastien Bouchard <sebastien.bouchard@ca.kontron.com>");
MODULE_LICENSE("GPL");
/*Hardware Reset of the PLL */
#define RESET_ON 0x00
#define RESET_OFF 0x01
/* MODE SELECT */
#define NORMAL_MODE 0x00
#define HOLDOVER_MODE 0x10
#define FREERUN_MODE 0x20
/* FILTER SELECT */
#define FILTER_6HZ 0x04
#define FILTER_12HZ 0x00
/* SELECT REFERENCE FREQUENCY */
#define REF_CLK1_8kHz 0x00
#define REF_CLK2_19_44MHz 0x02
/* Select primary or secondary redundant clock */
#define PRIMARY_CLOCK 0x00
#define SECONDARY_CLOCK 0x01
/* CLOCK TRANSMISSION DEFINE */
#define CLK_8kHz 0xff
#define CLK_16_384MHz 0xfb
#define CLK_1_544MHz 0x00
#define CLK_2_048MHz 0x01
#define CLK_4_096MHz 0x02
#define CLK_6_312MHz 0x03
#define CLK_8_192MHz 0x04
#define CLK_19_440MHz 0x06
#define CLK_8_592MHz 0x08
#define CLK_11_184MHz 0x09
#define CLK_34_368MHz 0x0b
#define CLK_44_736MHz 0x0a
/* RECEIVED REFERENCE */
#define AMC_B1 0
#define AMC_B2 1
/* HARDWARE SWITCHING DEFINE */
#define HW_ENABLE 0x80
#define HW_DISABLE 0x00
/* HARDWARE SWITCHING MODE DEFINE */
#define PLL_HOLDOVER 0x40
#define LOST_CLOCK 0x00
/* ALARMS DEFINE */
#define UNLOCK_MASK 0x10
#define HOLDOVER_MASK 0x20
#define SEC_LOST_MASK 0x40
#define PRI_LOST_MASK 0x80
/* INTERRUPT CAUSE DEFINE */
#define PRI_LOS_01_MASK 0x01
#define PRI_LOS_10_MASK 0x02
#define SEC_LOS_01_MASK 0x04
#define SEC_LOS_10_MASK 0x08
#define HOLDOVER_01_MASK 0x10
#define HOLDOVER_10_MASK 0x20
#define UNLOCK_01_MASK 0x40
#define UNLOCK_10_MASK 0x80
struct tlclk_alarms {
__u32 lost_clocks;
__u32 lost_primary_clock;
__u32 lost_secondary_clock;
__u32 primary_clock_back;
__u32 secondary_clock_back;
__u32 switchover_primary;
__u32 switchover_secondary;
__u32 pll_holdover;
__u32 pll_end_holdover;
__u32 pll_lost_sync;
__u32 pll_sync;
};
/* Telecom clock I/O register definition */
#define TLCLK_BASE 0xa08
#define TLCLK_REG0 TLCLK_BASE
#define TLCLK_REG1 (TLCLK_BASE+1)
#define TLCLK_REG2 (TLCLK_BASE+2)
#define TLCLK_REG3 (TLCLK_BASE+3)
#define TLCLK_REG4 (TLCLK_BASE+4)
#define TLCLK_REG5 (TLCLK_BASE+5)
#define TLCLK_REG6 (TLCLK_BASE+6)
#define TLCLK_REG7 (TLCLK_BASE+7)
#define SET_PORT_BITS(port, mask, val) outb(((inb(port) & mask) | val), port)
/* 0 = Dynamic allocation of the major device number */
#define TLCLK_MAJOR 0
/* sysfs interface definition:
Upon loading the driver will create a sysfs directory under
/sys/devices/platform/telco_clock.
This directory exports the following interfaces. There operation is
documented in the MCPBL0010 TPS under the Telecom Clock API section, 11.4.
alarms :
current_ref :
received_ref_clk3a :
received_ref_clk3b :
enable_clk3a_output :
enable_clk3b_output :
enable_clka0_output :
enable_clka1_output :
enable_clkb0_output :
enable_clkb1_output :
filter_select :
hardware_switching :
hardware_switching_mode :
telclock_version :
mode_select :
refalign :
reset :
select_amcb1_transmit_clock :
select_amcb2_transmit_clock :
select_redundant_clock :
select_ref_frequency :
All sysfs interfaces are integers in hex format, i.e echo 99 > refalign
has the same effect as echo 0x99 > refalign.
*/
static unsigned int telclk_interrupt;
static int int_events; /* Event that generate a interrupt */
static int got_event; /* if events processing have been done */
static void switchover_timeout(unsigned long data);
static struct timer_list switchover_timer =
TIMER_INITIALIZER(switchover_timeout , 0, 0);
static unsigned long tlclk_timer_data;
static struct tlclk_alarms *alarm_events;
static DEFINE_SPINLOCK(event_lock);
static int tlclk_major = TLCLK_MAJOR;
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 09:55:46 -04:00
static irqreturn_t tlclk_interrupt(int irq, void *dev_id);
static DECLARE_WAIT_QUEUE_HEAD(wq);
static unsigned long useflags;
static DEFINE_MUTEX(tlclk_mutex);
static int tlclk_open(struct inode *inode, struct file *filp)
{
int result;
if (test_and_set_bit(0, &useflags))
return -EBUSY;
/* this legacy device is always one per system and it doesn't
* know how to handle multiple concurrent clients.
*/
/* Make sure there is no interrupt pending while
* initialising interrupt handler */
inb(TLCLK_REG6);
/* This device is wired through the FPGA IO space of the ATCA blade
* we can't share this IRQ */
result = request_irq(telclk_interrupt, &tlclk_interrupt,
IRQF_DISABLED, "telco_clock", tlclk_interrupt);
if (result == -EBUSY) {
printk(KERN_ERR "tlclk: Interrupt can't be reserved.\n");
return -EBUSY;
}
inb(TLCLK_REG6); /* Clear interrupt events */
return 0;
}
static int tlclk_release(struct inode *inode, struct file *filp)
{
free_irq(telclk_interrupt, tlclk_interrupt);
clear_bit(0, &useflags);
return 0;
}
static ssize_t tlclk_read(struct file *filp, char __user *buf, size_t count,
loff_t *f_pos)
{
if (count < sizeof(struct tlclk_alarms))
return -EIO;
if (mutex_lock_interruptible(&tlclk_mutex))
return -EINTR;
wait_event_interruptible(wq, got_event);
if (copy_to_user(buf, alarm_events, sizeof(struct tlclk_alarms))) {
mutex_unlock(&tlclk_mutex);
return -EFAULT;
}
memset(alarm_events, 0, sizeof(struct tlclk_alarms));
got_event = 0;
mutex_unlock(&tlclk_mutex);
return sizeof(struct tlclk_alarms);
}
static const struct file_operations tlclk_fops = {
.read = tlclk_read,
.open = tlclk_open,
.release = tlclk_release,
};
static struct miscdevice tlclk_miscdev = {
.minor = MISC_DYNAMIC_MINOR,
.name = "telco_clock",
.fops = &tlclk_fops,
};
static ssize_t show_current_ref(struct device *d,
struct device_attribute *attr, char *buf)
{
unsigned long ret_val;
unsigned long flags;
spin_lock_irqsave(&event_lock, flags);
ret_val = ((inb(TLCLK_REG1) & 0x08) >> 3);
spin_unlock_irqrestore(&event_lock, flags);
return sprintf(buf, "0x%lX\n", ret_val);
}
static DEVICE_ATTR(current_ref, S_IRUGO, show_current_ref, NULL);
static ssize_t show_telclock_version(struct device *d,
struct device_attribute *attr, char *buf)
{
unsigned long ret_val;
unsigned long flags;
spin_lock_irqsave(&event_lock, flags);
ret_val = inb(TLCLK_REG5);
spin_unlock_irqrestore(&event_lock, flags);
return sprintf(buf, "0x%lX\n", ret_val);
}
static DEVICE_ATTR(telclock_version, S_IRUGO,
show_telclock_version, NULL);
static ssize_t show_alarms(struct device *d,
struct device_attribute *attr, char *buf)
{
unsigned long ret_val;
unsigned long flags;
spin_lock_irqsave(&event_lock, flags);
ret_val = (inb(TLCLK_REG2) & 0xf0);
spin_unlock_irqrestore(&event_lock, flags);
return sprintf(buf, "0x%lX\n", ret_val);
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
static ssize_t store_received_ref_clk3a(struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long tmp;
unsigned char val;
unsigned long flags;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, ": tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG1, 0xef, val);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(received_ref_clk3a, (S_IWUSR|S_IWGRP), NULL,
store_received_ref_clk3a);
static ssize_t store_received_ref_clk3b(struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long tmp;
unsigned char val;
unsigned long flags;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, ": tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG1, 0xdf, val << 1);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(received_ref_clk3b, (S_IWUSR|S_IWGRP), NULL,
store_received_ref_clk3b);
static ssize_t store_enable_clk3b_output(struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long tmp;
unsigned char val;
unsigned long flags;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, ": tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG3, 0x7f, val << 7);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(enable_clk3b_output, (S_IWUSR|S_IWGRP), NULL,
store_enable_clk3b_output);
static ssize_t store_enable_clk3a_output(struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long flags;
unsigned long tmp;
unsigned char val;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, "tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG3, 0xbf, val << 6);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(enable_clk3a_output, (S_IWUSR|S_IWGRP), NULL,
store_enable_clk3a_output);
static ssize_t store_enable_clkb1_output(struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long flags;
unsigned long tmp;
unsigned char val;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, "tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG2, 0xf7, val << 3);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(enable_clkb1_output, (S_IWUSR|S_IWGRP), NULL,
store_enable_clkb1_output);
static ssize_t store_enable_clka1_output(struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long flags;
unsigned long tmp;
unsigned char val;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, "tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG2, 0xfb, val << 2);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(enable_clka1_output, (S_IWUSR|S_IWGRP), NULL,
store_enable_clka1_output);
static ssize_t store_enable_clkb0_output(struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long flags;
unsigned long tmp;
unsigned char val;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, "tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG2, 0xfd, val << 1);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(enable_clkb0_output, (S_IWUSR|S_IWGRP), NULL,
store_enable_clkb0_output);
static ssize_t store_enable_clka0_output(struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long flags;
unsigned long tmp;
unsigned char val;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, "tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG2, 0xfe, val);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(enable_clka0_output, (S_IWUSR|S_IWGRP), NULL,
store_enable_clka0_output);
static ssize_t store_select_amcb2_transmit_clock(struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long flags;
unsigned long tmp;
unsigned char val;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, "tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
if ((val == CLK_8kHz) || (val == CLK_16_384MHz)) {
SET_PORT_BITS(TLCLK_REG3, 0xc7, 0x28);
SET_PORT_BITS(TLCLK_REG1, 0xfb, ~val);
} else if (val >= CLK_8_592MHz) {
SET_PORT_BITS(TLCLK_REG3, 0xc7, 0x38);
switch (val) {
case CLK_8_592MHz:
SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
break;
case CLK_11_184MHz:
SET_PORT_BITS(TLCLK_REG0, 0xfc, 0);
break;
case CLK_34_368MHz:
SET_PORT_BITS(TLCLK_REG0, 0xfc, 3);
break;
case CLK_44_736MHz:
SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
break;
}
} else
SET_PORT_BITS(TLCLK_REG3, 0xc7, val << 3);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(select_amcb2_transmit_clock, (S_IWUSR|S_IWGRP), NULL,
store_select_amcb2_transmit_clock);
static ssize_t store_select_amcb1_transmit_clock(struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long tmp;
unsigned char val;
unsigned long flags;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, "tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
if ((val == CLK_8kHz) || (val == CLK_16_384MHz)) {
SET_PORT_BITS(TLCLK_REG3, 0xf8, 0x5);
SET_PORT_BITS(TLCLK_REG1, 0xfb, ~val);
} else if (val >= CLK_8_592MHz) {
SET_PORT_BITS(TLCLK_REG3, 0xf8, 0x7);
switch (val) {
case CLK_8_592MHz:
SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
break;
case CLK_11_184MHz:
SET_PORT_BITS(TLCLK_REG0, 0xfc, 0);
break;
case CLK_34_368MHz:
SET_PORT_BITS(TLCLK_REG0, 0xfc, 3);
break;
case CLK_44_736MHz:
SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
break;
}
} else
SET_PORT_BITS(TLCLK_REG3, 0xf8, val);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(select_amcb1_transmit_clock, (S_IWUSR|S_IWGRP), NULL,
store_select_amcb1_transmit_clock);
static ssize_t store_select_redundant_clock(struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long tmp;
unsigned char val;
unsigned long flags;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, "tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG1, 0xfe, val);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(select_redundant_clock, (S_IWUSR|S_IWGRP), NULL,
store_select_redundant_clock);
static ssize_t store_select_ref_frequency(struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long tmp;
unsigned char val;
unsigned long flags;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, "tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG1, 0xfd, val);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(select_ref_frequency, (S_IWUSR|S_IWGRP), NULL,
store_select_ref_frequency);
static ssize_t store_filter_select(struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long tmp;
unsigned char val;
unsigned long flags;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, "tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG0, 0xfb, val);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(filter_select, (S_IWUSR|S_IWGRP), NULL, store_filter_select);
static ssize_t store_hardware_switching_mode(struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long tmp;
unsigned char val;
unsigned long flags;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, "tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG0, 0xbf, val);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(hardware_switching_mode, (S_IWUSR|S_IWGRP), NULL,
store_hardware_switching_mode);
static ssize_t store_hardware_switching(struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long tmp;
unsigned char val;
unsigned long flags;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, "tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG0, 0x7f, val);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(hardware_switching, (S_IWUSR|S_IWGRP), NULL,
store_hardware_switching);
static ssize_t store_refalign (struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long tmp;
unsigned long flags;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, "tmp = 0x%lX\n", tmp);
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG0, 0xf7, 0);
SET_PORT_BITS(TLCLK_REG0, 0xf7, 0x08);
SET_PORT_BITS(TLCLK_REG0, 0xf7, 0);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(refalign, (S_IWUSR|S_IWGRP), NULL, store_refalign);
static ssize_t store_mode_select (struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long tmp;
unsigned char val;
unsigned long flags;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, "tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG0, 0xcf, val);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(mode_select, (S_IWUSR|S_IWGRP), NULL, store_mode_select);
static ssize_t store_reset (struct device *d,
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long tmp;
unsigned char val;
unsigned long flags;
sscanf(buf, "%lX", &tmp);
dev_dbg(d, "tmp = 0x%lX\n", tmp);
val = (unsigned char)tmp;
spin_lock_irqsave(&event_lock, flags);
SET_PORT_BITS(TLCLK_REG4, 0xfd, val);
spin_unlock_irqrestore(&event_lock, flags);
return strnlen(buf, count);
}
static DEVICE_ATTR(reset, (S_IWUSR|S_IWGRP), NULL, store_reset);
static struct attribute *tlclk_sysfs_entries[] = {
&dev_attr_current_ref.attr,
&dev_attr_telclock_version.attr,
&dev_attr_alarms.attr,
&dev_attr_received_ref_clk3a.attr,
&dev_attr_received_ref_clk3b.attr,
&dev_attr_enable_clk3a_output.attr,
&dev_attr_enable_clk3b_output.attr,
&dev_attr_enable_clkb1_output.attr,
&dev_attr_enable_clka1_output.attr,
&dev_attr_enable_clkb0_output.attr,
&dev_attr_enable_clka0_output.attr,
&dev_attr_select_amcb1_transmit_clock.attr,
&dev_attr_select_amcb2_transmit_clock.attr,
&dev_attr_select_redundant_clock.attr,
&dev_attr_select_ref_frequency.attr,
&dev_attr_filter_select.attr,
&dev_attr_hardware_switching_mode.attr,
&dev_attr_hardware_switching.attr,
&dev_attr_refalign.attr,
&dev_attr_mode_select.attr,
&dev_attr_reset.attr,
NULL
};
static struct attribute_group tlclk_attribute_group = {
.name = NULL, /* put in device directory */
.attrs = tlclk_sysfs_entries,
};
static struct platform_device *tlclk_device;
static int __init tlclk_init(void)
{
int ret;
ret = register_chrdev(tlclk_major, "telco_clock", &tlclk_fops);
if (ret < 0) {
printk(KERN_ERR "tlclk: can't get major %d.\n", tlclk_major);
return ret;
}
tlclk_major = ret;
alarm_events = kzalloc( sizeof(struct tlclk_alarms), GFP_KERNEL);
if (!alarm_events)
goto out1;
/* Read telecom clock IRQ number (Set by BIOS) */
if (!request_region(TLCLK_BASE, 8, "telco_clock")) {
printk(KERN_ERR "tlclk: request_region 0x%X failed.\n",
TLCLK_BASE);
ret = -EBUSY;
goto out2;
}
telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
if (0x0F == telclk_interrupt ) { /* not MCPBL0010 ? */
printk(KERN_ERR "telclk_interrup = 0x%x non-mcpbl0010 hw.\n",
telclk_interrupt);
ret = -ENXIO;
goto out3;
}
init_timer(&switchover_timer);
ret = misc_register(&tlclk_miscdev);
if (ret < 0) {
printk(KERN_ERR "tlclk: misc_register returns %d.\n", ret);
goto out3;
}
tlclk_device = platform_device_register_simple("telco_clock",
-1, NULL, 0);
if (IS_ERR(tlclk_device)) {
printk(KERN_ERR "tlclk: platform_device_register failed.\n");
ret = PTR_ERR(tlclk_device);
goto out4;
}
ret = sysfs_create_group(&tlclk_device->dev.kobj,
&tlclk_attribute_group);
if (ret) {
printk(KERN_ERR "tlclk: failed to create sysfs device attributes.\n");
goto out5;
}
return 0;
out5:
platform_device_unregister(tlclk_device);
out4:
misc_deregister(&tlclk_miscdev);
out3:
release_region(TLCLK_BASE, 8);
out2:
kfree(alarm_events);
out1:
unregister_chrdev(tlclk_major, "telco_clock");
return ret;
}
static void __exit tlclk_cleanup(void)
{
sysfs_remove_group(&tlclk_device->dev.kobj, &tlclk_attribute_group);
platform_device_unregister(tlclk_device);
misc_deregister(&tlclk_miscdev);
unregister_chrdev(tlclk_major, "telco_clock");
release_region(TLCLK_BASE, 8);
del_timer_sync(&switchover_timer);
kfree(alarm_events);
}
static void switchover_timeout(unsigned long data)
{
unsigned long flags = *(unsigned long *) data;
if ((flags & 1)) {
if ((inb(TLCLK_REG1) & 0x08) != (flags & 0x08))
alarm_events->switchover_primary++;
} else {
if ((inb(TLCLK_REG1) & 0x08) != (flags & 0x08))
alarm_events->switchover_secondary++;
}
/* Alarm processing is done, wake up read task */
del_timer(&switchover_timer);
got_event = 1;
wake_up(&wq);
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 09:55:46 -04:00
static irqreturn_t tlclk_interrupt(int irq, void *dev_id)
{
unsigned long flags;
spin_lock_irqsave(&event_lock, flags);
/* Read and clear interrupt events */
int_events = inb(TLCLK_REG6);
/* Primary_Los changed from 0 to 1 ? */
if (int_events & PRI_LOS_01_MASK) {
if (inb(TLCLK_REG2) & SEC_LOST_MASK)
alarm_events->lost_clocks++;
else
alarm_events->lost_primary_clock++;
}
/* Primary_Los changed from 1 to 0 ? */
if (int_events & PRI_LOS_10_MASK) {
alarm_events->primary_clock_back++;
SET_PORT_BITS(TLCLK_REG1, 0xFE, 1);
}
/* Secondary_Los changed from 0 to 1 ? */
if (int_events & SEC_LOS_01_MASK) {
if (inb(TLCLK_REG2) & PRI_LOST_MASK)
alarm_events->lost_clocks++;
else
alarm_events->lost_secondary_clock++;
}
/* Secondary_Los changed from 1 to 0 ? */
if (int_events & SEC_LOS_10_MASK) {
alarm_events->secondary_clock_back++;
SET_PORT_BITS(TLCLK_REG1, 0xFE, 0);
}
if (int_events & HOLDOVER_10_MASK)
alarm_events->pll_end_holdover++;
if (int_events & UNLOCK_01_MASK)
alarm_events->pll_lost_sync++;
if (int_events & UNLOCK_10_MASK)
alarm_events->pll_sync++;
/* Holdover changed from 0 to 1 ? */
if (int_events & HOLDOVER_01_MASK) {
alarm_events->pll_holdover++;
/* TIMEOUT in ~10ms */
switchover_timer.expires = jiffies + msecs_to_jiffies(10);
tlclk_timer_data = inb(TLCLK_REG1);
switchover_timer.data = (unsigned long) &tlclk_timer_data;
mod_timer(&switchover_timer, switchover_timer.expires);
} else {
got_event = 1;
wake_up(&wq);
}
spin_unlock_irqrestore(&event_lock, flags);
return IRQ_HANDLED;
}
module_init(tlclk_init);
module_exit(tlclk_cleanup);