2005-04-16 18:20:36 -04:00
|
|
|
# drivers/mtd/maps/Kconfig
|
2005-11-07 06:15:40 -05:00
|
|
|
# $Id: Kconfig,v 1.61 2005/11/07 11:14:26 gleixner Exp $
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
|
menu "Mapping drivers for chip access"
|
|
|
|
|
depends on MTD!=n
|
|
|
|
|
|
|
|
|
|
config MTD_COMPLEX_MAPPINGS
|
|
|
|
|
bool "Support non-linear mappings of flash chips"
|
|
|
|
|
depends on MTD
|
|
|
|
|
help
|
|
|
|
|
This causes the chip drivers to allow for complicated
|
|
|
|
|
paged mappings of flash chips.
|
|
|
|
|
|
|
|
|
|
config MTD_PHYSMAP
|
|
|
|
|
tristate "CFI Flash device in physical memory map"
|
|
|
|
|
depends on MTD_CFI
|
|
|
|
|
help
|
|
|
|
|
This provides a 'mapping' driver which allows the CFI probe and
|
|
|
|
|
command set driver code to communicate with flash chips which
|
|
|
|
|
are mapped physically into the CPU's memory. You will need to
|
|
|
|
|
configure the physical address and size of the flash chips on
|
|
|
|
|
your particular board as well as the bus width, either statically
|
|
|
|
|
with config options or at run-time.
|
|
|
|
|
|
|
|
|
|
config MTD_PHYSMAP_START
|
|
|
|
|
hex "Physical start address of flash mapping"
|
|
|
|
|
depends on MTD_PHYSMAP
|
|
|
|
|
default "0x8000000"
|
|
|
|
|
help
|
|
|
|
|
This is the physical memory location at which the flash chips
|
|
|
|
|
are mapped on your particular target board. Refer to the
|
|
|
|
|
memory map which should hopefully be in the documentation for
|
|
|
|
|
your board.
|
|
|
|
|
Ignore this option if you use run-time physmap configuration
|
|
|
|
|
(i.e., run-time calling physmap_configure()).
|
|
|
|
|
|
|
|
|
|
config MTD_PHYSMAP_LEN
|
|
|
|
|
hex "Physical length of flash mapping"
|
|
|
|
|
depends on MTD_PHYSMAP
|
[MTD] Convert physmap to platform driver
After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.
In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.
This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)
Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-07 12:16:36 -04:00
|
|
|
default "0"
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This is the total length of the mapping of the flash chips on
|
|
|
|
|
your particular board. If there is space, or aliases, in the
|
|
|
|
|
physical memory map between the chips, this could be larger
|
|
|
|
|
than the total amount of flash present. Refer to the memory
|
|
|
|
|
map which should hopefully be in the documentation for your
|
|
|
|
|
board.
|
|
|
|
|
Ignore this option if you use run-time physmap configuration
|
|
|
|
|
(i.e., run-time calling physmap_configure()).
|
|
|
|
|
|
|
|
|
|
config MTD_PHYSMAP_BANKWIDTH
|
|
|
|
|
int "Bank width in octets"
|
|
|
|
|
depends on MTD_PHYSMAP
|
|
|
|
|
default "2"
|
|
|
|
|
help
|
|
|
|
|
This is the total width of the data bus of the flash devices
|
|
|
|
|
in octets. For example, if you have a data bus width of 32
|
|
|
|
|
bits, you would set the bus width octect value to 4. This is
|
|
|
|
|
used internally by the CFI drivers.
|
|
|
|
|
Ignore this option if you use run-time physmap configuration
|
|
|
|
|
(i.e., run-time calling physmap_configure()).
|
|
|
|
|
|
|
|
|
|
config MTD_SUN_UFLASH
|
|
|
|
|
tristate "Sun Microsystems userflash support"
|
2005-12-23 00:03:47 -05:00
|
|
|
depends on SPARC && MTD_CFI
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
2005-11-07 06:15:40 -05:00
|
|
|
This provides a 'mapping' driver which supports the way in
|
|
|
|
|
which user-programmable flash chips are connected on various
|
|
|
|
|
Sun Microsystems boardsets. This driver will require CFI support
|
2005-04-16 18:20:36 -04:00
|
|
|
in the kernel, so if you did not enable CFI previously, do that now.
|
|
|
|
|
|
|
|
|
|
config MTD_PNC2000
|
|
|
|
|
tristate "CFI Flash device mapped on Photron PNC-2000"
|
|
|
|
|
depends on X86 && MTD_CFI && MTD_PARTITIONS
|
|
|
|
|
help
|
|
|
|
|
PNC-2000 is the name of Network Camera product from PHOTRON
|
|
|
|
|
Ltd. in Japan. It uses CFI-compliant flash.
|
|
|
|
|
|
|
|
|
|
config MTD_SC520CDP
|
|
|
|
|
tristate "CFI Flash device mapped on AMD SC520 CDP"
|
2006-04-29 06:41:44 -04:00
|
|
|
depends on X86 && MTD_CFI && MTD_CONCAT
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
The SC520 CDP board has two banks of CFI-compliant chips and one
|
|
|
|
|
Dual-in-line JEDEC chip. This 'mapping' driver supports that
|
|
|
|
|
arrangement, implementing three MTD devices.
|
|
|
|
|
|
|
|
|
|
config MTD_NETSC520
|
|
|
|
|
tristate "CFI Flash device mapped on AMD NetSc520"
|
|
|
|
|
depends on X86 && MTD_CFI && MTD_PARTITIONS
|
|
|
|
|
help
|
|
|
|
|
This enables access routines for the flash chips on the AMD NetSc520
|
2005-11-07 06:15:40 -05:00
|
|
|
demonstration board. If you have one of these boards and would like
|
2005-04-16 18:20:36 -04:00
|
|
|
to use the flash chips on it, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_TS5500
|
|
|
|
|
tristate "JEDEC Flash device mapped on Technologic Systems TS-5500"
|
2005-11-08 19:12:50 -05:00
|
|
|
depends on X86
|
2005-06-29 05:46:19 -04:00
|
|
|
select MTD_PARTITIONS
|
|
|
|
|
select MTD_JEDECPROBE
|
|
|
|
|
select MTD_CFI_AMDSTD
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This provides a driver for the on-board flash of the Technologic
|
2005-06-16 04:49:33 -04:00
|
|
|
System's TS-5500 board. The 2MB flash is split into 3 partitions
|
2005-04-16 18:20:36 -04:00
|
|
|
which are accessed as separate MTD devices.
|
|
|
|
|
|
2005-06-16 04:49:33 -04:00
|
|
|
mtd0 and mtd2 are the two BIOS drives, which use the resident
|
|
|
|
|
flash disk (RFD) flash translation layer.
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
|
mtd1 allows you to reprogram your BIOS. BE VERY CAREFUL.
|
|
|
|
|
|
|
|
|
|
Note that jumper 3 ("Write Enable Drive A") must be set
|
|
|
|
|
otherwise detection won't succeeed.
|
|
|
|
|
|
|
|
|
|
config MTD_SBC_GXX
|
|
|
|
|
tristate "CFI Flash device mapped on Arcom SBC-GXx boards"
|
|
|
|
|
depends on X86 && MTD_CFI_INTELEXT && MTD_PARTITIONS && MTD_COMPLEX_MAPPINGS
|
|
|
|
|
help
|
|
|
|
|
This provides a driver for the on-board flash of Arcom Control
|
|
|
|
|
Systems' SBC-GXn family of boards, formerly known as SBC-MediaGX.
|
|
|
|
|
By default the flash is split into 3 partitions which are accessed
|
|
|
|
|
as separate MTD devices. This board utilizes Intel StrataFlash.
|
|
|
|
|
More info at
|
|
|
|
|
<http://www.arcomcontrols.com/products/icp/pc104/processors/SBC_GX1.htm>.
|
|
|
|
|
|
|
|
|
|
config MTD_LUBBOCK
|
|
|
|
|
tristate "CFI Flash device mapped on Intel Lubbock XScale eval board"
|
|
|
|
|
depends on ARCH_LUBBOCK && MTD_CFI_INTELEXT && MTD_PARTITIONS
|
|
|
|
|
help
|
|
|
|
|
This provides a driver for the on-board flash of the Intel
|
|
|
|
|
'Lubbock' XScale evaluation board.
|
|
|
|
|
|
2005-07-01 18:55:24 -04:00
|
|
|
config MTD_MAINSTONE
|
|
|
|
|
tristate "CFI Flash device mapped on Intel Mainstone XScale eval board"
|
|
|
|
|
depends on MACH_MAINSTONE && MTD_CFI_INTELEXT
|
|
|
|
|
select MTD_PARTITIONS
|
|
|
|
|
help
|
|
|
|
|
This provides a driver for the on-board flash of the Intel
|
|
|
|
|
'Mainstone PXA27x evaluation board.
|
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
config MTD_OCTAGON
|
|
|
|
|
tristate "JEDEC Flash device mapped on Octagon 5066 SBC"
|
|
|
|
|
depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS
|
|
|
|
|
help
|
|
|
|
|
This provides a 'mapping' driver which supports the way in which
|
|
|
|
|
the flash chips are connected in the Octagon-5066 Single Board
|
|
|
|
|
Computer. More information on the board is available at
|
|
|
|
|
<http://www.octagonsystems.com/CPUpages/5066.html>.
|
|
|
|
|
|
|
|
|
|
config MTD_VMAX
|
|
|
|
|
tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301"
|
|
|
|
|
depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS
|
|
|
|
|
help
|
|
|
|
|
This provides a 'mapping' driver which supports the way in which
|
|
|
|
|
the flash chips are connected in the Tempustech VMAX SBC301 Single
|
|
|
|
|
Board Computer. More information on the board is available at
|
|
|
|
|
<http://www.tempustech.com/>.
|
|
|
|
|
|
|
|
|
|
config MTD_SCx200_DOCFLASH
|
|
|
|
|
tristate "Flash device mapped with DOCCS on NatSemi SCx200"
|
|
|
|
|
depends on SCx200 && MTD_CFI && MTD_PARTITIONS
|
|
|
|
|
help
|
|
|
|
|
Enable support for a flash chip mapped using the DOCCS signal on a
|
|
|
|
|
National Semiconductor SCx200 processor.
|
|
|
|
|
|
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
|
|
|
|
|
|
If compiled as a module, it will be called scx200_docflash.
|
|
|
|
|
|
|
|
|
|
config MTD_AMD76XROM
|
|
|
|
|
tristate "BIOS flash chip on AMD76x southbridge"
|
|
|
|
|
depends on X86 && MTD_JEDECPROBE
|
|
|
|
|
help
|
|
|
|
|
Support for treating the BIOS flash chip on AMD76x motherboards
|
|
|
|
|
as an MTD device - with this you can reprogram your BIOS.
|
|
|
|
|
|
|
|
|
|
BE VERY CAREFUL.
|
|
|
|
|
|
|
|
|
|
config MTD_ICHXROM
|
|
|
|
|
tristate "BIOS flash chip on Intel Controller Hub 2/3/4/5"
|
|
|
|
|
depends on X86 && MTD_JEDECPROBE
|
|
|
|
|
help
|
|
|
|
|
Support for treating the BIOS flash chip on ICHX motherboards
|
|
|
|
|
as an MTD device - with this you can reprogram your BIOS.
|
|
|
|
|
|
|
|
|
|
BE VERY CAREFUL.
|
|
|
|
|
|
|
|
|
|
config MTD_SCB2_FLASH
|
|
|
|
|
tristate "BIOS flash chip on Intel SCB2 boards"
|
|
|
|
|
depends on X86 && MTD_JEDECPROBE
|
|
|
|
|
help
|
|
|
|
|
Support for treating the BIOS flash chip on Intel SCB2 boards
|
|
|
|
|
as an MTD device - with this you can reprogram your BIOS.
|
|
|
|
|
|
|
|
|
|
BE VERY CAREFUL.
|
|
|
|
|
|
|
|
|
|
config MTD_TSUNAMI
|
|
|
|
|
tristate "Flash chips on Tsunami TIG bus"
|
|
|
|
|
depends on ALPHA_TSUNAMI && MTD_COMPLEX_MAPPINGS
|
|
|
|
|
help
|
|
|
|
|
Support for the flash chip on Tsunami TIG bus.
|
|
|
|
|
|
|
|
|
|
config MTD_LASAT
|
|
|
|
|
tristate "Flash chips on LASAT board"
|
|
|
|
|
depends on LASAT
|
|
|
|
|
help
|
|
|
|
|
Support for the flash chips on the Lasat 100 and 200 boards.
|
|
|
|
|
|
|
|
|
|
config MTD_NETtel
|
|
|
|
|
tristate "CFI flash device on SnapGear/SecureEdge"
|
|
|
|
|
depends on X86 && MTD_PARTITIONS && MTD_JEDECPROBE
|
|
|
|
|
help
|
|
|
|
|
Support for flash chips on NETtel/SecureEdge/SnapGear boards.
|
|
|
|
|
|
2005-02-27 16:50:25 -05:00
|
|
|
config MTD_ALCHEMY
|
2005-11-07 06:15:40 -05:00
|
|
|
tristate ' AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support'
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on SOC_AU1X00
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
2005-02-27 16:50:25 -05:00
|
|
|
Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
|
2005-04-16 18:20:36 -04:00
|
|
|
|
2005-09-18 06:46:45 -04:00
|
|
|
config MTD_MTX1
|
|
|
|
|
tristate "4G Systems MTX-1 Flash device"
|
|
|
|
|
depends on MIPS && MIPS_MTX1
|
|
|
|
|
help
|
|
|
|
|
Flash memory access on 4G Systems MTX-1 Board. If you have one of
|
|
|
|
|
these boards and would like to use the flash chips on it, say 'Y'.
|
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
config MTD_DILNETPC
|
|
|
|
|
tristate "CFI Flash device mapped on DIL/Net PC"
|
|
|
|
|
depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
|
|
|
|
|
help
|
|
|
|
|
MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP".
|
|
|
|
|
For details, see <http://www.ssv-embedded.de/ssv/pc104/p169.htm>
|
|
|
|
|
and <http://www.ssv-embedded.de/ssv/pc104/p170.htm>
|
|
|
|
|
|
|
|
|
|
config MTD_DILNETPC_BOOTSIZE
|
|
|
|
|
hex "Size of DIL/Net PC flash boot partition"
|
|
|
|
|
depends on MTD_DILNETPC
|
|
|
|
|
default "0x80000"
|
|
|
|
|
help
|
|
|
|
|
The amount of space taken up by the kernel or Etherboot
|
|
|
|
|
on the DIL/Net PC flash chips.
|
|
|
|
|
|
|
|
|
|
config MTD_L440GX
|
|
|
|
|
tristate "BIOS flash chip on Intel L440GX boards"
|
|
|
|
|
depends on X86 && MTD_JEDECPROBE
|
|
|
|
|
help
|
|
|
|
|
Support for treating the BIOS flash chip on Intel L440GX motherboards
|
|
|
|
|
as an MTD device - with this you can reprogram your BIOS.
|
|
|
|
|
|
|
|
|
|
BE VERY CAREFUL.
|
|
|
|
|
|
|
|
|
|
config MTD_SBC8240
|
|
|
|
|
tristate "Flash device on SBC8240"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_JEDECPROBE && 8260
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
Flash access on the SBC8240 board from Wind River. See
|
|
|
|
|
<http://www.windriver.com/products/sbc8240/>
|
|
|
|
|
|
|
|
|
|
config MTD_TQM8XXL
|
|
|
|
|
tristate "CFI Flash device mapped on TQM8XXL"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_CFI && TQM8xxL
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
The TQM8xxL PowerPC board has up to two banks of CFI-compliant
|
|
|
|
|
chips, currently uses AMD one. This 'mapping' driver supports
|
|
|
|
|
that arrangement, allowing the CFI probe and command set driver
|
|
|
|
|
code to communicate with the chips on the TQM8xxL board. More at
|
|
|
|
|
<http://www.denx.de/embedded-ppc-en.html>.
|
|
|
|
|
|
|
|
|
|
config MTD_RPXLITE
|
|
|
|
|
tristate "CFI Flash device mapped on RPX Lite or CLLF"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_CFI && (RPXCLASSIC || RPXLITE)
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
The RPXLite PowerPC board has CFI-compliant chips mapped in
|
|
|
|
|
a strange sparse mapping. This 'mapping' driver supports that
|
|
|
|
|
arrangement, allowing the CFI probe and command set driver code
|
|
|
|
|
to communicate with the chips on the RPXLite board. More at
|
|
|
|
|
<http://www.embeddedplanet.com/>.
|
|
|
|
|
|
|
|
|
|
config MTD_MBX860
|
|
|
|
|
tristate "System flash on MBX860 board"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_CFI && MBX
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access routines for the flash chips on the Motorola
|
|
|
|
|
MBX860 board. If you have one of these boards and would like
|
|
|
|
|
to use the flash chips on it, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_DBOX2
|
|
|
|
|
tristate "CFI Flash device mapped on D-Box2"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access routines for the flash chips on the Nokia/Sagem
|
|
|
|
|
D-Box 2 board. If you have one of these boards and would like to use
|
|
|
|
|
the flash chips on it, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_CFI_FLAGADM
|
|
|
|
|
tristate "CFI Flash device mapping on FlagaDM"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on 8xx && MTD_CFI
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
Mapping for the Flaga digital module. If you don't have one, ignore
|
|
|
|
|
this setting.
|
|
|
|
|
|
|
|
|
|
config MTD_BEECH
|
|
|
|
|
tristate "CFI Flash device mapped on IBM 405LP Beech"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_CFI && BEECH
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access routines for the flash chips on the IBM
|
|
|
|
|
405LP Beech board. If you have one of these boards and would like
|
|
|
|
|
to use the flash chips on it, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_ARCTIC
|
|
|
|
|
tristate "CFI Flash device mapped on IBM 405LP Arctic"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_CFI && ARCTIC2
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access routines for the flash chips on the IBM 405LP
|
|
|
|
|
Arctic board. If you have one of these boards and would like to
|
|
|
|
|
use the flash chips on it, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_WALNUT
|
|
|
|
|
tristate "Flash device mapped on IBM 405GP Walnut"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_JEDECPROBE && WALNUT
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access routines for the flash chips on the IBM 405GP
|
|
|
|
|
Walnut board. If you have one of these boards and would like to
|
|
|
|
|
use the flash chips on it, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_EBONY
|
|
|
|
|
tristate "Flash devices mapped on IBM 440GP Ebony"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_JEDECPROBE && EBONY
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access routines for the flash chips on the IBM 440GP
|
|
|
|
|
Ebony board. If you have one of these boards and would like to
|
|
|
|
|
use the flash chips on it, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_OCOTEA
|
|
|
|
|
tristate "Flash devices mapped on IBM 440GX Ocotea"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_CFI && OCOTEA
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access routines for the flash chips on the IBM 440GX
|
|
|
|
|
Ocotea board. If you have one of these boards and would like to
|
|
|
|
|
use the flash chips on it, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_REDWOOD
|
|
|
|
|
tristate "CFI Flash devices mapped on IBM Redwood"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access routines for the flash chips on the IBM
|
|
|
|
|
Redwood board. If you have one of these boards and would like to
|
|
|
|
|
use the flash chips on it, say 'Y'.
|
|
|
|
|
|
2005-11-07 03:33:38 -05:00
|
|
|
config MTD_TQM834x
|
|
|
|
|
tristate "Flash device mapped on TQ Components TQM834x Boards"
|
|
|
|
|
depends on MTD_CFI && TQM834x
|
|
|
|
|
help
|
|
|
|
|
This enables access routines for the flash chips on the
|
|
|
|
|
TQ Components TQM834x boards. If you have one of these boards
|
|
|
|
|
and would like to use the flash chips on it, say 'Y'.
|
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
config MTD_CSTM_MIPS_IXX
|
|
|
|
|
tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
|
|
|
|
|
depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS
|
|
|
|
|
help
|
|
|
|
|
This provides a mapping driver for the Integrated Technology
|
|
|
|
|
Express, Inc (ITE) QED-4N-S01B eval board and the Globespan IVR
|
|
|
|
|
Reference Board. It provides the necessary addressing, length,
|
|
|
|
|
buswidth, vpp code and addition setup of the flash device for
|
|
|
|
|
these boards. In addition, this mapping driver can be used for
|
|
|
|
|
other boards via setting of the CONFIG_MTD_CSTM_MIPS_IXX_START/
|
|
|
|
|
LEN/BUSWIDTH parameters. This mapping will provide one mtd device
|
|
|
|
|
using one partition. The start address can be offset from the
|
|
|
|
|
beginning of flash and the len can be less than the total flash
|
|
|
|
|
device size to allow a window into the flash. Both CFI and JEDEC
|
|
|
|
|
probes are called.
|
|
|
|
|
|
|
|
|
|
config MTD_CSTM_MIPS_IXX_START
|
|
|
|
|
hex "Physical start address of flash mapping"
|
|
|
|
|
depends on MTD_CSTM_MIPS_IXX
|
|
|
|
|
default "0x8000000"
|
|
|
|
|
help
|
|
|
|
|
This is the physical memory location that the MTD driver will
|
2005-11-07 06:15:40 -05:00
|
|
|
use for the flash chips on your particular target board.
|
|
|
|
|
Refer to the memory map which should hopefully be in the
|
2005-04-16 18:20:36 -04:00
|
|
|
documentation for your board.
|
|
|
|
|
|
|
|
|
|
config MTD_CSTM_MIPS_IXX_LEN
|
|
|
|
|
hex "Physical length of flash mapping"
|
|
|
|
|
depends on MTD_CSTM_MIPS_IXX
|
|
|
|
|
default "0x4000000"
|
|
|
|
|
help
|
2005-11-07 06:15:40 -05:00
|
|
|
This is the total length that the MTD driver will use for the
|
2005-04-16 18:20:36 -04:00
|
|
|
flash chips on your particular board. Refer to the memory
|
|
|
|
|
map which should hopefully be in the documentation for your
|
|
|
|
|
board.
|
|
|
|
|
|
|
|
|
|
config MTD_CSTM_MIPS_IXX_BUSWIDTH
|
|
|
|
|
int "Bus width in octets"
|
|
|
|
|
depends on MTD_CSTM_MIPS_IXX
|
|
|
|
|
default "2"
|
|
|
|
|
help
|
|
|
|
|
This is the total bus width of the mapping of the flash chips
|
|
|
|
|
on your particular board.
|
|
|
|
|
|
|
|
|
|
config MTD_OCELOT
|
|
|
|
|
tristate "Momenco Ocelot boot flash device"
|
|
|
|
|
depends on MIPS && MOMENCO_OCELOT
|
|
|
|
|
help
|
|
|
|
|
This enables access routines for the boot flash device and for the
|
|
|
|
|
NVRAM on the Momenco Ocelot board. If you have one of these boards
|
|
|
|
|
and would like access to either of these, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_SOLUTIONENGINE
|
|
|
|
|
tristate "CFI Flash device mapped on Hitachi SolutionEngine"
|
|
|
|
|
depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS
|
|
|
|
|
help
|
|
|
|
|
This enables access to the flash chips on the Hitachi SolutionEngine and
|
|
|
|
|
similar boards. Say 'Y' if you are building a kernel for such a board.
|
|
|
|
|
|
|
|
|
|
config MTD_ARM_INTEGRATOR
|
|
|
|
|
tristate "CFI Flash device mapped on ARM Integrator/P720T"
|
|
|
|
|
depends on ARM && MTD_CFI
|
|
|
|
|
|
|
|
|
|
config MTD_CDB89712
|
|
|
|
|
tristate "Cirrus CDB89712 evaluation board mappings"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_CFI && ARCH_CDB89712
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access to the flash or ROM chips on the CDB89712 board.
|
|
|
|
|
If you have such a board, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_SA1100
|
|
|
|
|
tristate "CFI Flash device mapped on StrongARM SA11x0"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access to the flash chips on most platforms based on
|
|
|
|
|
the SA1100 and SA1110, including the Assabet and the Compaq iPAQ.
|
|
|
|
|
If you have such a board, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_IPAQ
|
|
|
|
|
tristate "CFI Flash device mapped on Compaq/HP iPAQ"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on IPAQ_HANDHELD && MTD_CFI
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This provides a driver for the on-board flash of the iPAQ.
|
|
|
|
|
|
|
|
|
|
config MTD_DC21285
|
|
|
|
|
tristate "CFI Flash device mapped on DC21285 Footbridge"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This provides a driver for the flash accessed using Intel's
|
|
|
|
|
21285 bridge used with Intel's StrongARM processors. More info at
|
|
|
|
|
<http://www.intel.com/design/bridge/docs/21285_documentation.htm>.
|
|
|
|
|
|
|
|
|
|
config MTD_IQ80310
|
|
|
|
|
tristate "CFI Flash device mapped on the XScale IQ80310 board"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_CFI && ARCH_IQ80310
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access routines for the flash chips on the Intel XScale
|
2005-11-07 06:15:40 -05:00
|
|
|
IQ80310 evaluation board. If you have one of these boards and would
|
2005-04-16 18:20:36 -04:00
|
|
|
like to use the flash chips on it, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_IXP4XX
|
|
|
|
|
tristate "CFI Flash device mapped on Intel IXP4xx based systems"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
2005-11-07 06:15:40 -05:00
|
|
|
This enables MTD access to flash devices on platforms based
|
2005-04-16 18:20:36 -04:00
|
|
|
on Intel's IXP4xx family of network processors such as the
|
|
|
|
|
IXDP425 and Coyote. If you have an IXP4xx based board and
|
|
|
|
|
would like to use the flash chips on it, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_IXP2000
|
|
|
|
|
tristate "CFI Flash device mapped on Intel IXP2000 based systems"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
2005-11-07 06:15:40 -05:00
|
|
|
This enables MTD access to flash devices on platforms based
|
2005-04-16 18:20:36 -04:00
|
|
|
on Intel's IXP2000 family of network processors such as the
|
|
|
|
|
IXDP425 and Coyote. If you have an IXP2000 based board and
|
|
|
|
|
would like to use the flash chips on it, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_FORTUNET
|
|
|
|
|
tristate "CFI Flash device mapped on the FortuNet board"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access to the Flash on the FortuNet board. If you
|
|
|
|
|
have such a board, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_AUTCPU12
|
|
|
|
|
tristate "NV-RAM mapping AUTCPU12 board"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on ARCH_AUTCPU12
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access to the NV-RAM on autronix autcpu12 board.
|
|
|
|
|
If you have such a board, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_EDB7312
|
|
|
|
|
tristate "CFI Flash device mapped on EDB7312"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on ARCH_EDB7312 && MTD_CFI
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access to the CFI Flash on the Cogent EDB7312 board.
|
|
|
|
|
If you have such a board, say 'Y' here.
|
|
|
|
|
|
|
|
|
|
config MTD_IMPA7
|
|
|
|
|
tristate "JEDEC Flash device mapped on impA7"
|
|
|
|
|
depends on ARM && MTD_JEDECPROBE
|
|
|
|
|
help
|
|
|
|
|
This enables access to the NOR Flash on the impA7 board of
|
|
|
|
|
implementa GmbH. If you have such a board, say 'Y' here.
|
|
|
|
|
|
|
|
|
|
config MTD_CEIVA
|
|
|
|
|
tristate "JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_JEDECPROBE && ARCH_CEIVA
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access to the flash chips on the Ceiva/Polaroid
|
|
|
|
|
PhotoMax Digital Picture Frame.
|
|
|
|
|
If you have such a device, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_NOR_TOTO
|
|
|
|
|
tristate "NOR Flash device on TOTO board"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on ARCH_OMAP && OMAP_TOTO
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access to the NOR flash on the Texas Instruments
|
|
|
|
|
TOTO board.
|
|
|
|
|
|
|
|
|
|
config MTD_H720X
|
|
|
|
|
tristate "Hynix evaluation board mappings"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access to the flash chips on the Hynix evaluation boards.
|
|
|
|
|
If you have such a board, say 'Y'.
|
|
|
|
|
|
|
|
|
|
config MTD_MPC1211
|
|
|
|
|
tristate "CFI Flash device mapped on Interface MPC-1211"
|
2005-06-29 05:46:19 -04:00
|
|
|
depends on SH_MPC1211 && MTD_CFI
|
2005-04-16 18:20:36 -04:00
|
|
|
help
|
|
|
|
|
This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
|
|
|
|
|
If you have such a board, say 'Y'.
|
|
|
|
|
|
2005-07-01 21:53:28 -04:00
|
|
|
config MTD_OMAP_NOR
|
|
|
|
|
tristate "TI OMAP board mappings"
|
|
|
|
|
depends on MTD_CFI && ARCH_OMAP
|
|
|
|
|
help
|
|
|
|
|
This enables access to the NOR flash chips on TI OMAP-based
|
|
|
|
|
boards defining flash platform devices and flash platform data.
|
|
|
|
|
These boards include the Innovator, H2, H3, OSK, Perseus2, and
|
|
|
|
|
more. If you have such a board, say 'Y'.
|
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
# This needs CFI or JEDEC, depending on the cards found.
|
|
|
|
|
config MTD_PCI
|
|
|
|
|
tristate "PCI MTD driver"
|
|
|
|
|
depends on MTD && PCI && MTD_COMPLEX_MAPPINGS
|
|
|
|
|
help
|
|
|
|
|
Mapping for accessing flash devices on add-in cards like the Intel XScale
|
|
|
|
|
IQ80310 card, and the Intel EBSA285 card in blank ROM programming mode
|
|
|
|
|
(please see the manual for the link settings).
|
|
|
|
|
|
|
|
|
|
If you are not sure, say N.
|
|
|
|
|
|
|
|
|
|
config MTD_PCMCIA
|
|
|
|
|
tristate "PCMCIA MTD driver"
|
|
|
|
|
depends on MTD && PCMCIA && MTD_COMPLEX_MAPPINGS && BROKEN
|
|
|
|
|
help
|
|
|
|
|
Map driver for accessing PCMCIA linear flash memory cards. These
|
|
|
|
|
cards are usually around 4-16MiB in size. This does not include
|
|
|
|
|
Compact Flash cards which are treated as IDE devices.
|
|
|
|
|
|
2005-06-27 19:28:32 -04:00
|
|
|
config MTD_PCMCIA_ANONYMOUS
|
|
|
|
|
bool "Use PCMCIA MTD drivers for anonymous PCMCIA cards"
|
|
|
|
|
depends on MTD_PCMCIA
|
|
|
|
|
help
|
|
|
|
|
If this option is enabled, PCMCIA cards which do not report
|
|
|
|
|
anything about themselves are assumed to be MTD cards.
|
|
|
|
|
|
|
|
|
|
If unsure, say N.
|
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
config MTD_UCLINUX
|
|
|
|
|
tristate "Generic uClinux RAM/ROM filesystem support"
|
|
|
|
|
depends on MTD_PARTITIONS && !MMU
|
|
|
|
|
help
|
|
|
|
|
Map driver to support image based filesystems for uClinux.
|
|
|
|
|
|
|
|
|
|
config MTD_WRSBC8260
|
|
|
|
|
tristate "Map driver for WindRiver PowerQUICC II MPC82xx board"
|
|
|
|
|
depends on (SBC82xx || SBC8560)
|
|
|
|
|
select MTD_PARTITIONS
|
|
|
|
|
select MTD_MAP_BANK_WIDTH_4
|
|
|
|
|
select MTD_MAP_BANK_WIDTH_1
|
|
|
|
|
select MTD_CFI_I1
|
|
|
|
|
select MTD_CFI_I4
|
|
|
|
|
help
|
|
|
|
|
Map driver for WindRiver PowerQUICC II MPC82xx board. Drives
|
|
|
|
|
all three flash regions on CS0, CS1 and CS6 if they are configured
|
|
|
|
|
correctly by the boot loader.
|
|
|
|
|
|
|
|
|
|
config MTD_DMV182
|
|
|
|
|
tristate "Map driver for Dy-4 SVME/DMV-182 board."
|
|
|
|
|
depends on DMV182
|
|
|
|
|
select MTD_PARTITIONS
|
|
|
|
|
select MTD_MAP_BANK_WIDTH_32
|
|
|
|
|
select MTD_CFI_I8
|
|
|
|
|
select MTD_CFI_AMDSTD
|
|
|
|
|
help
|
|
|
|
|
Map driver for Dy-4 SVME/DMV-182 board.
|
|
|
|
|
|
|
|
|
|
config MTD_BAST
|
2005-02-18 06:03:48 -05:00
|
|
|
tristate "Map driver for Simtec BAST (EB2410ITX) or Thorcom VR1000"
|
|
|
|
|
depends on ARCH_BAST || MACH_VR1000
|
2005-04-16 18:20:36 -04:00
|
|
|
select MTD_PARTITIONS
|
|
|
|
|
select MTD_MAP_BANK_WIDTH_16
|
|
|
|
|
select MTD_JEDECPROBE
|
|
|
|
|
help
|
2005-02-18 06:03:48 -05:00
|
|
|
Map driver for NOR flash on the Simtec BAST (EB2410ITX), or the
|
|
|
|
|
Thorcom VR1000
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
|
Note, this driver *cannot* over-ride the WP link on the
|
|
|
|
|
board, or currently detect the state of the link.
|
|
|
|
|
|
|
|
|
|
config MTD_BAST_MAXSIZE
|
|
|
|
|
int "Maximum size for BAST flash area (MiB)"
|
|
|
|
|
depends on MTD_BAST
|
|
|
|
|
default "4"
|
|
|
|
|
|
|
|
|
|
config MTD_SHARP_SL
|
|
|
|
|
bool "ROM maped on Sharp SL Series"
|
|
|
|
|
depends on MTD && ARCH_PXA
|
|
|
|
|
help
|
|
|
|
|
This enables access to the flash chip on the Sharp SL Series of PDAs.
|
|
|
|
|
|
2005-01-23 19:37:04 -05:00
|
|
|
config MTD_PLATRAM
|
2005-03-17 21:07:24 -05:00
|
|
|
tristate "Map driver for platform device RAM (mtd-ram)"
|
2005-01-23 19:37:04 -05:00
|
|
|
depends on MTD
|
|
|
|
|
select MTD_RAM
|
|
|
|
|
help
|
|
|
|
|
Map driver for RAM areas described via the platform device
|
|
|
|
|
system.
|
|
|
|
|
|
|
|
|
|
This selection automatically selects the map_ram driver.
|
|
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
endmenu
|
|
|
|
|
|
