kernel-aes67/drivers/acpi/ec.c

957 lines
22 KiB
C
Raw Normal View History

/*
* ec.c - ACPI Embedded Controller Driver (v2.0)
*
* Copyright (C) 2006, 2007 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
* Copyright (C) 2006 Denis Sadykov <denis.m.sadykov@intel.com>
* Copyright (C) 2004 Luming Yu <luming.yu@intel.com>
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <asm/io.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include <acpi/actypes.h>
#define ACPI_EC_CLASS "embedded_controller"
#define ACPI_EC_DEVICE_NAME "Embedded Controller"
#define ACPI_EC_FILE_INFO "info"
#undef PREFIX
#define PREFIX "ACPI: EC: "
/* EC status register */
#define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */
#define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */
#define ACPI_EC_FLAG_BURST 0x10 /* burst mode */
#define ACPI_EC_FLAG_SCI 0x20 /* EC-SCI occurred */
/* EC commands */
enum ec_command {
ACPI_EC_COMMAND_READ = 0x80,
ACPI_EC_COMMAND_WRITE = 0x81,
ACPI_EC_BURST_ENABLE = 0x82,
ACPI_EC_BURST_DISABLE = 0x83,
ACPI_EC_COMMAND_QUERY = 0x84,
};
/* EC events */
enum ec_event {
ACPI_EC_EVENT_OBF_1 = 1, /* Output buffer full */
ACPI_EC_EVENT_IBF_0, /* Input buffer empty */
};
#define ACPI_EC_DELAY 500 /* Wait 500ms max. during EC ops */
#define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */
static enum ec_mode {
EC_INTR = 1, /* Output buffer full */
EC_POLL, /* Input buffer empty */
} acpi_ec_mode = EC_INTR;
static int acpi_ec_remove(struct acpi_device *device, int type);
static int acpi_ec_start(struct acpi_device *device);
static int acpi_ec_stop(struct acpi_device *device, int type);
static int acpi_ec_add(struct acpi_device *device);
static const struct acpi_device_id ec_device_ids[] = {
{"PNP0C09", 0},
{"", 0},
};
static struct acpi_driver acpi_ec_driver = {
.name = "ec",
.class = ACPI_EC_CLASS,
.ids = ec_device_ids,
.ops = {
.add = acpi_ec_add,
.remove = acpi_ec_remove,
.start = acpi_ec_start,
.stop = acpi_ec_stop,
},
};
/* If we find an EC via the ECDT, we need to keep a ptr to its context */
/* External interfaces use first EC only, so remember */
typedef int (*acpi_ec_query_func) (void *data);
struct acpi_ec_query_handler {
struct list_head node;
acpi_ec_query_func func;
acpi_handle handle;
void *data;
u8 query_bit;
};
static struct acpi_ec {
acpi_handle handle;
unsigned long gpe;
unsigned long command_addr;
unsigned long data_addr;
unsigned long global_lock;
struct mutex lock;
atomic_t query_pending;
atomic_t event_count;
wait_queue_head_t wait;
struct list_head list;
} *boot_ec, *first_ec;
/* --------------------------------------------------------------------------
Transaction Management
-------------------------------------------------------------------------- */
static inline u8 acpi_ec_read_status(struct acpi_ec *ec)
{
return inb(ec->command_addr);
}
static inline u8 acpi_ec_read_data(struct acpi_ec *ec)
{
return inb(ec->data_addr);
}
static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command)
{
outb(command, ec->command_addr);
}
static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data)
{
outb(data, ec->data_addr);
}
static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event,
unsigned old_count)
{
u8 status = acpi_ec_read_status(ec);
if (old_count == atomic_read(&ec->event_count))
return 0;
if (event == ACPI_EC_EVENT_OBF_1) {
if (status & ACPI_EC_FLAG_OBF)
return 1;
} else if (event == ACPI_EC_EVENT_IBF_0) {
if (!(status & ACPI_EC_FLAG_IBF))
return 1;
}
return 0;
}
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event,
unsigned count, int force_poll)
{
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
if (unlikely(force_poll) || acpi_ec_mode == EC_POLL) {
unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
while (time_before(jiffies, delay)) {
if (acpi_ec_check_status(ec, event, 0))
return 0;
}
} else {
if (wait_event_timeout(ec->wait,
acpi_ec_check_status(ec, event, count),
msecs_to_jiffies(ACPI_EC_DELAY)) ||
acpi_ec_check_status(ec, event, 0)) {
return 0;
} else {
printk(KERN_ERR PREFIX "acpi_ec_wait timeout,"
" status = %d, expect_event = %d\n",
acpi_ec_read_status(ec), event);
}
}
return -ETIME;
}
static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
const u8 * wdata, unsigned wdata_len,
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
u8 * rdata, unsigned rdata_len,
int force_poll)
{
int result = 0;
unsigned count = atomic_read(&ec->event_count);
acpi_ec_write_cmd(ec, command);
for (; wdata_len > 0; --wdata_len) {
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count, force_poll);
if (result) {
printk(KERN_ERR PREFIX
"write_cmd timeout, command = %d\n", command);
goto end;
}
count = atomic_read(&ec->event_count);
acpi_ec_write_data(ec, *(wdata++));
}
if (!rdata_len) {
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count, force_poll);
if (result) {
printk(KERN_ERR PREFIX
"finish-write timeout, command = %d\n", command);
goto end;
}
} else if (command == ACPI_EC_COMMAND_QUERY) {
atomic_set(&ec->query_pending, 0);
}
for (; rdata_len > 0; --rdata_len) {
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, count, force_poll);
if (result) {
printk(KERN_ERR PREFIX "read timeout, command = %d\n",
command);
goto end;
}
count = atomic_read(&ec->event_count);
*(rdata++) = acpi_ec_read_data(ec);
}
end:
return result;
}
static int acpi_ec_transaction(struct acpi_ec *ec, u8 command,
const u8 * wdata, unsigned wdata_len,
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
u8 * rdata, unsigned rdata_len,
int force_poll)
{
int status;
u32 glk;
if (!ec || (wdata_len && !wdata) || (rdata_len && !rdata))
return -EINVAL;
if (rdata)
memset(rdata, 0, rdata_len);
mutex_lock(&ec->lock);
if (ec->global_lock) {
status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
if (ACPI_FAILURE(status)) {
mutex_unlock(&ec->lock);
return -ENODEV;
}
}
/* Make sure GPE is enabled before doing transaction */
acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0, 0);
if (status) {
printk(KERN_ERR PREFIX
"input buffer is not empty, aborting transaction\n");
goto end;
}
status = acpi_ec_transaction_unlocked(ec, command,
wdata, wdata_len,
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
rdata, rdata_len,
force_poll);
end:
if (ec->global_lock)
acpi_release_global_lock(glk);
mutex_unlock(&ec->lock);
return status;
}
/*
* Note: samsung nv5000 doesn't work with ec burst mode.
* http://bugzilla.kernel.org/show_bug.cgi?id=4980
*/
int acpi_ec_burst_enable(struct acpi_ec *ec)
{
u8 d;
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
return acpi_ec_transaction(ec, ACPI_EC_BURST_ENABLE, NULL, 0, &d, 1, 0);
}
int acpi_ec_burst_disable(struct acpi_ec *ec)
{
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
return acpi_ec_transaction(ec, ACPI_EC_BURST_DISABLE, NULL, 0, NULL, 0, 0);
}
static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 * data)
{
int result;
u8 d;
result = acpi_ec_transaction(ec, ACPI_EC_COMMAND_READ,
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
&address, 1, &d, 1, 0);
*data = d;
return result;
}
static int acpi_ec_write(struct acpi_ec *ec, u8 address, u8 data)
{
u8 wdata[2] = { address, data };
return acpi_ec_transaction(ec, ACPI_EC_COMMAND_WRITE,
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
wdata, 2, NULL, 0, 0);
}
/*
* Externally callable EC access functions. For now, assume 1 EC only
*/
int ec_burst_enable(void)
{
if (!first_ec)
return -ENODEV;
return acpi_ec_burst_enable(first_ec);
}
EXPORT_SYMBOL(ec_burst_enable);
int ec_burst_disable(void)
{
if (!first_ec)
return -ENODEV;
return acpi_ec_burst_disable(first_ec);
}
EXPORT_SYMBOL(ec_burst_disable);
int ec_read(u8 addr, u8 * val)
{
int err;
u8 temp_data;
if (!first_ec)
return -ENODEV;
err = acpi_ec_read(first_ec, addr, &temp_data);
if (!err) {
*val = temp_data;
return 0;
} else
return err;
}
EXPORT_SYMBOL(ec_read);
int ec_write(u8 addr, u8 val)
{
int err;
if (!first_ec)
return -ENODEV;
err = acpi_ec_write(first_ec, addr, val);
return err;
}
EXPORT_SYMBOL(ec_write);
int ec_transaction(u8 command,
const u8 * wdata, unsigned wdata_len,
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
u8 * rdata, unsigned rdata_len,
int force_poll)
{
if (!first_ec)
return -ENODEV;
return acpi_ec_transaction(first_ec, command, wdata,
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
wdata_len, rdata, rdata_len,
force_poll);
}
EXPORT_SYMBOL(ec_transaction);
static int acpi_ec_query(struct acpi_ec *ec, u8 * data)
{
int result;
u8 d;
if (!ec || !data)
return -EINVAL;
/*
* Query the EC to find out which _Qxx method we need to evaluate.
* Note that successful completion of the query causes the ACPI_EC_SCI
* bit to be cleared (and thus clearing the interrupt source).
*/
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
result = acpi_ec_transaction(ec, ACPI_EC_COMMAND_QUERY, NULL, 0, &d, 1, 0);
if (result)
return result;
if (!d)
return -ENODATA;
*data = d;
return 0;
}
/* --------------------------------------------------------------------------
Event Management
-------------------------------------------------------------------------- */
int acpi_ec_add_query_handler(struct acpi_ec *ec, u8 query_bit,
acpi_handle handle, acpi_ec_query_func func,
void *data)
{
struct acpi_ec_query_handler *handler =
kzalloc(sizeof(struct acpi_ec_query_handler), GFP_KERNEL);
if (!handler)
return -ENOMEM;
handler->query_bit = query_bit;
handler->handle = handle;
handler->func = func;
handler->data = data;
mutex_lock(&ec->lock);
list_add_tail(&handler->node, &ec->list);
mutex_unlock(&ec->lock);
return 0;
}
EXPORT_SYMBOL_GPL(acpi_ec_add_query_handler);
void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit)
{
struct acpi_ec_query_handler *handler;
mutex_lock(&ec->lock);
list_for_each_entry(handler, &ec->list, node) {
if (query_bit == handler->query_bit) {
list_del(&handler->node);
kfree(handler);
break;
}
}
mutex_unlock(&ec->lock);
}
EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler);
static void acpi_ec_gpe_query(void *ec_cxt)
{
struct acpi_ec *ec = ec_cxt;
u8 value = 0;
struct acpi_ec_query_handler *handler, copy;
if (!ec || acpi_ec_query(ec, &value))
return;
mutex_lock(&ec->lock);
list_for_each_entry(handler, &ec->list, node) {
if (value == handler->query_bit) {
/* have custom handler for this bit */
memcpy(&copy, handler, sizeof(copy));
mutex_unlock(&ec->lock);
if (copy.func) {
copy.func(copy.data);
} else if (copy.handle) {
acpi_evaluate_object(copy.handle, NULL, NULL, NULL);
}
return;
}
}
mutex_unlock(&ec->lock);
}
static u32 acpi_ec_gpe_handler(void *data)
{
acpi_status status = AE_OK;
u8 value;
struct acpi_ec *ec = data;
acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands The ACPI EC that is used in MSI laptops knows some non-standard commands for changing the screen brighntess and a few other things, which are used by the msi-laptop.c driver. Unfortunately for these commands no GPE events for IBF and OBF are triggered. Since nowadays the EC code uses the ec_intr=1 mode by default, this causes these operations to timeout, although they don't fail. In result, all operations that you can do with the msi-laptop.c driver take more or less 1s to complete, which is awfully slow. In one of the more recent kernels (2.6.20?) the EC subsystem has been revamped. With that change the EC timeout has been increased. before that increase the MSI EC accesses were slow -- but not *that* slow, hence I took notice of this limitation of the MSI EC hardware only very recently. The standard EC operations on the MSI EC as defined in the ACPI spec support GPE events properly. The following patch adds a new argument "force_poll" to the ec_transaction() function (and friends). If set to 1, the function will poll for IBF/OBF even if ec_intr=1 is enabled. If set to 0 the current behaviour is used. The msi-laptop driver is modified to make use of this new flag, so that OBF/IBF is polled for the special MSI EC transactions -- but only for them. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-04 08:16:19 -04:00
atomic_inc(&ec->event_count);
if (acpi_ec_mode == EC_INTR) {
wake_up(&ec->wait);
}
value = acpi_ec_read_status(ec);
if ((value & ACPI_EC_FLAG_SCI) && !atomic_read(&ec->query_pending)) {
atomic_set(&ec->query_pending, 1);
status =
acpi_os_execute(OSL_EC_BURST_HANDLER, acpi_ec_gpe_query, ec);
}
return status == AE_OK ?
ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
}
/* --------------------------------------------------------------------------
Address Space Management
-------------------------------------------------------------------------- */
static acpi_status
acpi_ec_space_setup(acpi_handle region_handle,
u32 function, void *handler_context, void **return_context)
{
/*
* The EC object is in the handler context and is needed
* when calling the acpi_ec_space_handler.
*/
*return_context = (function != ACPI_REGION_DEACTIVATE) ?
handler_context : NULL;
return AE_OK;
}
static acpi_status
acpi_ec_space_handler(u32 function, acpi_physical_address address,
u32 bits, acpi_integer *value,
void *handler_context, void *region_context)
{
struct acpi_ec *ec = handler_context;
int result = 0, i = 0;
u8 temp = 0;
if ((address > 0xFF) || !value || !handler_context)
return AE_BAD_PARAMETER;
if (function != ACPI_READ && function != ACPI_WRITE)
return AE_BAD_PARAMETER;
if (bits != 8 && acpi_strict)
return AE_BAD_PARAMETER;
while (bits - i > 0) {
if (function == ACPI_READ) {
result = acpi_ec_read(ec, address, &temp);
(*value) |= ((acpi_integer)temp) << i;
} else {
temp = 0xff & ((*value) >> i);
result = acpi_ec_write(ec, address, temp);
}
i += 8;
++address;
}
switch (result) {
case -EINVAL:
return AE_BAD_PARAMETER;
break;
case -ENODEV:
return AE_NOT_FOUND;
break;
case -ETIME:
return AE_TIME;
break;
default:
return AE_OK;
}
}
/* --------------------------------------------------------------------------
FS Interface (/proc)
-------------------------------------------------------------------------- */
static struct proc_dir_entry *acpi_ec_dir;
static int acpi_ec_read_info(struct seq_file *seq, void *offset)
{
struct acpi_ec *ec = seq->private;
if (!ec)
goto end;
seq_printf(seq, "gpe:\t\t\t0x%02x\n", (u32) ec->gpe);
seq_printf(seq, "ports:\t\t\t0x%02x, 0x%02x\n",
(unsigned)ec->command_addr, (unsigned)ec->data_addr);
seq_printf(seq, "use global lock:\t%s\n",
ec->global_lock ? "yes" : "no");
end:
return 0;
}
static int acpi_ec_info_open_fs(struct inode *inode, struct file *file)
{
return single_open(file, acpi_ec_read_info, PDE(inode)->data);
}
static struct file_operations acpi_ec_info_ops = {
.open = acpi_ec_info_open_fs,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
.owner = THIS_MODULE,
};
static int acpi_ec_add_fs(struct acpi_device *device)
{
struct proc_dir_entry *entry = NULL;
if (!acpi_device_dir(device)) {
acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
acpi_ec_dir);
if (!acpi_device_dir(device))
return -ENODEV;
}
entry = create_proc_entry(ACPI_EC_FILE_INFO, S_IRUGO,
acpi_device_dir(device));
if (!entry)
return -ENODEV;
else {
entry->proc_fops = &acpi_ec_info_ops;
entry->data = acpi_driver_data(device);
entry->owner = THIS_MODULE;
}
return 0;
}
static int acpi_ec_remove_fs(struct acpi_device *device)
{
if (acpi_device_dir(device)) {
remove_proc_entry(ACPI_EC_FILE_INFO, acpi_device_dir(device));
remove_proc_entry(acpi_device_bid(device), acpi_ec_dir);
acpi_device_dir(device) = NULL;
}
return 0;
}
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
static acpi_status
ec_parse_io_ports(struct acpi_resource *resource, void *context);
static struct acpi_ec *make_acpi_ec(void)
{
struct acpi_ec *ec = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
if (!ec)
return NULL;
atomic_set(&ec->query_pending, 1);
atomic_set(&ec->event_count, 1);
mutex_init(&ec->lock);
init_waitqueue_head(&ec->wait);
INIT_LIST_HEAD(&ec->list);
return ec;
}
static acpi_status
acpi_ec_register_query_methods(acpi_handle handle, u32 level,
void *context, void **return_value)
{
struct acpi_namespace_node *node = handle;
struct acpi_ec *ec = context;
int value = 0;
if (sscanf(node->name.ascii, "_Q%x", &value) == 1) {
acpi_ec_add_query_handler(ec, value, handle, NULL, NULL);
}
return AE_OK;
}
static acpi_status
ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval)
{
acpi_status status;
struct acpi_ec *ec = context;
status = acpi_walk_resources(handle, METHOD_NAME__CRS,
ec_parse_io_ports, ec);
if (ACPI_FAILURE(status))
return status;
/* Get GPE bit assignment (EC events). */
/* TODO: Add support for _GPE returning a package */
status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec->gpe);
if (ACPI_FAILURE(status))
return status;
/* Find and register all query methods */
acpi_walk_namespace(ACPI_TYPE_METHOD, handle, 1,
acpi_ec_register_query_methods, ec, NULL);
/* Use the global lock for all EC transactions? */
acpi_evaluate_integer(handle, "_GLK", NULL, &ec->global_lock);
ec->handle = handle;
printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
ec->gpe, ec->command_addr, ec->data_addr);
return AE_CTRL_TERMINATE;
}
static int acpi_ec_add(struct acpi_device *device)
{
struct acpi_ec *ec = NULL;
if (!device)
return -EINVAL;
strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_EC_CLASS);
ec = make_acpi_ec();
if (!ec)
return -ENOMEM;
if (ec_parse_device(device->handle, 0, ec, NULL) !=
AE_CTRL_TERMINATE) {
kfree(ec);
return -EINVAL;
}
/* Check if we found the boot EC */
if (boot_ec) {
if (boot_ec->gpe == ec->gpe) {
/* We might have incorrect info for GL at boot time */
mutex_lock(&boot_ec->lock);
boot_ec->global_lock = ec->global_lock;
/* Copy handlers from new ec into boot ec */
list_splice(&ec->list, &boot_ec->list);
mutex_unlock(&boot_ec->lock);
kfree(ec);
ec = boot_ec;
}
} else
first_ec = ec;
ec->handle = device->handle;
acpi_driver_data(device) = ec;
acpi_ec_add_fs(device);
return 0;
}
static int acpi_ec_remove(struct acpi_device *device, int type)
{
struct acpi_ec *ec;
struct acpi_ec_query_handler *handler, *tmp;
if (!device)
return -EINVAL;
ec = acpi_driver_data(device);
mutex_lock(&ec->lock);
list_for_each_entry_safe(handler, tmp, &ec->list, node) {
list_del(&handler->node);
kfree(handler);
}
mutex_unlock(&ec->lock);
acpi_ec_remove_fs(device);
acpi_driver_data(device) = NULL;
if (ec == first_ec)
first_ec = NULL;
/* Don't touch boot EC */
if (boot_ec != ec)
kfree(ec);
return 0;
}
static acpi_status
ec_parse_io_ports(struct acpi_resource *resource, void *context)
{
struct acpi_ec *ec = context;
if (resource->type != ACPI_RESOURCE_TYPE_IO)
return AE_OK;
/*
* The first address region returned is the data port, and
* the second address region returned is the status/command
* port.
*/
if (ec->data_addr == 0)
ec->data_addr = resource->data.io.minimum;
else if (ec->command_addr == 0)
ec->command_addr = resource->data.io.minimum;
else
return AE_CTRL_TERMINATE;
return AE_OK;
}
static int ec_install_handlers(struct acpi_ec *ec)
{
acpi_status status;
status = acpi_install_gpe_handler(NULL, ec->gpe,
ACPI_GPE_EDGE_TRIGGERED,
&acpi_ec_gpe_handler, ec);
if (ACPI_FAILURE(status))
return -ENODEV;
acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
status = acpi_install_address_space_handler(ec->handle,
ACPI_ADR_SPACE_EC,
&acpi_ec_space_handler,
&acpi_ec_space_setup, ec);
if (ACPI_FAILURE(status)) {
acpi_remove_gpe_handler(NULL, ec->gpe, &acpi_ec_gpe_handler);
return -ENODEV;
}
return 0;
}
static int acpi_ec_start(struct acpi_device *device)
{
struct acpi_ec *ec;
int ret = 0;
if (!device)
return -EINVAL;
ec = acpi_driver_data(device);
if (!ec)
return -EINVAL;
/* Boot EC is already working */
if (ec != boot_ec)
ret = ec_install_handlers(ec);
/* EC is fully operational, allow queries */
atomic_set(&ec->query_pending, 0);
return ret;
}
static int acpi_ec_stop(struct acpi_device *device, int type)
{
acpi_status status;
struct acpi_ec *ec;
if (!device)
return -EINVAL;
ec = acpi_driver_data(device);
if (!ec)
return -EINVAL;
/* Don't touch boot EC */
if (ec == boot_ec)
return 0;
status = acpi_remove_address_space_handler(ec->handle,
ACPI_ADR_SPACE_EC,
&acpi_ec_space_handler);
if (ACPI_FAILURE(status))
return -ENODEV;
status = acpi_remove_gpe_handler(NULL, ec->gpe, &acpi_ec_gpe_handler);
if (ACPI_FAILURE(status))
return -ENODEV;
return 0;
}
int __init acpi_ec_ecdt_probe(void)
{
int ret;
acpi_status status;
struct acpi_table_ecdt *ecdt_ptr;
boot_ec = make_acpi_ec();
if (!boot_ec)
return -ENOMEM;
/*
* Generate a boot ec context
*/
status = acpi_get_table(ACPI_SIG_ECDT, 1,
(struct acpi_table_header **)&ecdt_ptr);
if (ACPI_SUCCESS(status)) {
printk(KERN_INFO PREFIX "EC description table is found, configuring boot EC\n\n");
boot_ec->command_addr = ecdt_ptr->control.address;
boot_ec->data_addr = ecdt_ptr->data.address;
boot_ec->gpe = ecdt_ptr->gpe;
boot_ec->handle = ACPI_ROOT_OBJECT;
} else {
printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n");
status = acpi_get_devices(ec_device_ids[0].id, ec_parse_device,
boot_ec, NULL);
/* Check that acpi_get_devices actually find something */
if (ACPI_FAILURE(status) || !boot_ec->handle)
goto error;
}
ret = ec_install_handlers(boot_ec);
if (!ret) {
first_ec = boot_ec;
return 0;
}
error:
kfree(boot_ec);
boot_ec = NULL;
return -ENODEV;
}
static int __init acpi_ec_init(void)
{
int result = 0;
if (acpi_disabled)
return 0;
acpi_ec_dir = proc_mkdir(ACPI_EC_CLASS, acpi_root_dir);
if (!acpi_ec_dir)
return -ENODEV;
/* Now register the driver for the EC */
result = acpi_bus_register_driver(&acpi_ec_driver);
if (result < 0) {
remove_proc_entry(ACPI_EC_CLASS, acpi_root_dir);
return -ENODEV;
}
return result;
}
subsys_initcall(acpi_ec_init);
/* EC driver currently not unloadable */
#if 0
static void __exit acpi_ec_exit(void)
{
acpi_bus_unregister_driver(&acpi_ec_driver);
remove_proc_entry(ACPI_EC_CLASS, acpi_root_dir);
return;
}
#endif /* 0 */
static int __init acpi_ec_set_intr_mode(char *str)
{
int intr;
if (!get_option(&str, &intr))
return 0;
acpi_ec_mode = (intr) ? EC_INTR : EC_POLL;
printk(KERN_NOTICE PREFIX "%s mode.\n", intr ? "interrupt" : "polling");
return 1;
}
__setup("ec_intr=", acpi_ec_set_intr_mode);