freeswitch/libs/apr/network_io/win32/sendrecv.c
Michael Jerris 0488a5109a add apr to in tree libs
git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3733 d0543943-73ff-0310-b7d9-9358b9ac24b2
2006-12-19 19:58:23 +00:00

453 lines
15 KiB
C

/* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "apr_arch_networkio.h"
#include "apr_errno.h"
#include "apr_general.h"
#include "apr_network_io.h"
#include "apr_lib.h"
#include "apr_arch_file_io.h"
#if APR_HAVE_TIME_H
#include <time.h>
#endif
/* MAX_SEGMENT_SIZE is the maximum amount of data that will be sent to a client
* in one call of TransmitFile. This number must be small enough to give the
* slowest client time to receive the data before the socket timeout triggers.
* The same problem can exist with apr_socket_send(). In that case, we rely on
* the application to adjust socket timeouts and max send segment
* sizes appropriately.
* For example, Apache will in most cases call apr_socket_send() with less
* than 8193 bytes.
*/
#define MAX_SEGMENT_SIZE 65536
#define WSABUF_ON_STACK 50
APR_DECLARE(apr_status_t) apr_socket_send(apr_socket_t *sock, const char *buf,
apr_size_t *len)
{
apr_ssize_t rv;
WSABUF wsaData;
int lasterror;
DWORD dwBytes = 0;
wsaData.len = (u_long)*len;
wsaData.buf = (char*) buf;
#ifndef _WIN32_WCE
rv = WSASend(sock->socketdes, &wsaData, 1, &dwBytes, 0, NULL, NULL);
#else
rv = send(sock->socketdes, wsaData.buf, wsaData.len, 0);
dwBytes = rv;
#endif
if (rv == SOCKET_ERROR) {
lasterror = apr_get_netos_error();
*len = 0;
return lasterror;
}
*len = dwBytes;
return APR_SUCCESS;
}
APR_DECLARE(apr_status_t) apr_socket_recv(apr_socket_t *sock, char *buf,
apr_size_t *len)
{
apr_ssize_t rv;
WSABUF wsaData;
int lasterror;
DWORD dwBytes = 0;
DWORD flags = 0;
wsaData.len = (u_long)*len;
wsaData.buf = (char*) buf;
#ifndef _WIN32_WCE
rv = WSARecv(sock->socketdes, &wsaData, 1, &dwBytes, &flags, NULL, NULL);
#else
rv = recv(sock->socketdes, wsaData.buf, wsaData.len, 0);
dwBytes = rv;
#endif
if (rv == SOCKET_ERROR) {
lasterror = apr_get_netos_error();
*len = 0;
return lasterror;
}
*len = dwBytes;
return dwBytes == 0 ? APR_EOF : APR_SUCCESS;
}
APR_DECLARE(apr_status_t) apr_socket_sendv(apr_socket_t *sock,
const struct iovec *vec,
apr_int32_t in_vec, apr_size_t *nbytes)
{
apr_status_t rc = APR_SUCCESS;
apr_ssize_t rv;
apr_size_t cur_len;
apr_int32_t nvec = 0;
int i, j = 0;
DWORD dwBytes = 0;
WSABUF *pWsaBuf;
for (i = 0; i < in_vec; i++) {
cur_len = vec[i].iov_len;
nvec++;
while (cur_len > APR_DWORD_MAX) {
nvec++;
cur_len -= APR_DWORD_MAX;
}
}
pWsaBuf = (nvec <= WSABUF_ON_STACK) ? _alloca(sizeof(WSABUF) * (nvec))
: malloc(sizeof(WSABUF) * (nvec));
if (!pWsaBuf)
return APR_ENOMEM;
for (i = 0; i < in_vec; i++) {
char * base = vec[i].iov_base;
cur_len = vec[i].iov_len;
do {
if (cur_len > APR_DWORD_MAX) {
pWsaBuf[j].buf = base;
pWsaBuf[j].len = APR_DWORD_MAX;
cur_len -= APR_DWORD_MAX;
base += APR_DWORD_MAX;
}
else {
pWsaBuf[j].buf = base;
pWsaBuf[j].len = (DWORD)cur_len;
cur_len = 0;
}
j++;
} while (cur_len > 0);
}
#ifndef _WIN32_WCE
rv = WSASend(sock->socketdes, pWsaBuf, nvec, &dwBytes, 0, NULL, NULL);
if (rv == SOCKET_ERROR) {
rc = apr_get_netos_error();
}
#else
for (i = 0; i < nvec; i++) {
rv = send(sock->socketdes, pWsaBuf[i].buf, pWsaBuf[i].len, 0);
if (rv == SOCKET_ERROR) {
rc = apr_get_netos_error();
break;
}
dwBytes += rv;
}
#endif
if (nvec > WSABUF_ON_STACK)
free(pWsaBuf);
*nbytes = dwBytes;
return rc;
}
APR_DECLARE(apr_status_t) apr_socket_sendto(apr_socket_t *sock,
apr_sockaddr_t *where,
apr_int32_t flags, const char *buf,
apr_size_t *len)
{
apr_ssize_t rv;
rv = sendto(sock->socketdes, buf, (int)*len, flags,
(const struct sockaddr*)&where->sa,
where->salen);
if (rv == SOCKET_ERROR) {
*len = 0;
return apr_get_netos_error();
}
*len = rv;
return APR_SUCCESS;
}
APR_DECLARE(apr_status_t) apr_socket_recvfrom(apr_sockaddr_t *from,
apr_socket_t *sock,
apr_int32_t flags,
char *buf, apr_size_t *len)
{
apr_ssize_t rv;
rv = recvfrom(sock->socketdes, buf, (int)*len, flags,
(struct sockaddr*)&from->sa, &from->salen);
if (rv == SOCKET_ERROR) {
(*len) = 0;
return apr_get_netos_error();
}
(*len) = rv;
if (rv == 0 && sock->type == SOCK_STREAM)
return APR_EOF;
return APR_SUCCESS;
}
static apr_status_t collapse_iovec(char **off, apr_size_t *len,
struct iovec *iovec, int numvec,
char *buf, apr_size_t buflen)
{
if (numvec == 1) {
*off = iovec[0].iov_base;
*len = iovec[0].iov_len;
}
else {
int i;
for (i = 0; i < numvec; i++) {
*len += iovec[i].iov_len;
}
if (*len > buflen) {
*len = 0;
return APR_INCOMPLETE;
}
*off = buf;
for (i = 0; i < numvec; i++) {
memcpy(buf, iovec[i].iov_base, iovec[i].iov_len);
buf += iovec[i].iov_len;
}
}
return APR_SUCCESS;
}
#if APR_HAS_SENDFILE
/*
* apr_status_t apr_socket_sendfile(apr_socket_t *, apr_file_t *, apr_hdtr_t *,
* apr_off_t *, apr_size_t *, apr_int32_t flags)
* Send a file from an open file descriptor to a socket, along with
* optional headers and trailers
* arg 1) The socket to which we're writing
* arg 2) The open file from which to read
* arg 3) A structure containing the headers and trailers to send
* arg 4) Offset into the file where we should begin writing
* arg 5) Number of bytes to send out of the file
* arg 6) APR flags that are mapped to OS specific flags
*/
APR_DECLARE(apr_status_t) apr_socket_sendfile(apr_socket_t *sock,
apr_file_t *file,
apr_hdtr_t *hdtr,
apr_off_t *offset,
apr_size_t *len,
apr_int32_t flags)
{
apr_status_t status = APR_SUCCESS;
apr_status_t rv;
apr_off_t curoff = *offset;
DWORD dwFlags = 0;
apr_size_t nbytes;
TRANSMIT_FILE_BUFFERS tfb, *ptfb = NULL;
int ptr = 0;
apr_size_t bytes_to_send; /* Bytes to send out of the file (not including headers) */
int disconnected = 0;
int sendv_trailers = 0;
char hdtrbuf[4096];
if (apr_os_level < APR_WIN_NT) {
return APR_ENOTIMPL;
}
/* Use len to keep track of number of total bytes sent (including headers) */
bytes_to_send = *len;
*len = 0;
/* Handle the goofy case of sending headers/trailers and a zero byte file */
if (!bytes_to_send && hdtr) {
if (hdtr->numheaders) {
rv = apr_socket_sendv(sock, hdtr->headers, hdtr->numheaders,
&nbytes);
if (rv != APR_SUCCESS)
return rv;
*len += nbytes;
}
if (hdtr->numtrailers) {
rv = apr_socket_sendv(sock, hdtr->trailers, hdtr->numtrailers,
&nbytes);
if (rv != APR_SUCCESS)
return rv;
*len += nbytes;
}
return APR_SUCCESS;
}
memset(&tfb, '\0', sizeof (tfb));
/* Collapse the headers into a single buffer */
if (hdtr && hdtr->numheaders) {
apr_size_t head_length = tfb.HeadLength;
ptfb = &tfb;
nbytes = 0;
rv = collapse_iovec((char **)&ptfb->Head, &head_length,
hdtr->headers, hdtr->numheaders,
hdtrbuf, sizeof(hdtrbuf));
tfb.HeadLength = (DWORD)head_length;
/* If not enough buffer, punt to sendv */
if (rv == APR_INCOMPLETE) {
rv = apr_socket_sendv(sock, hdtr->headers, hdtr->numheaders, &nbytes);
if (rv != APR_SUCCESS)
return rv;
*len += nbytes;
ptfb = NULL;
}
}
/* Initialize the overlapped structure used on TransmitFile
*/
if (!sock->overlapped) {
sock->overlapped = apr_pcalloc(sock->pool, sizeof(OVERLAPPED));
sock->overlapped->hEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
}
while (bytes_to_send) {
DWORD xmitbytes;
if (bytes_to_send > MAX_SEGMENT_SIZE) {
xmitbytes = MAX_SEGMENT_SIZE;
}
else {
/* Last call to TransmitFile() */
xmitbytes = (DWORD)bytes_to_send;
/* Collapse the trailers into a single buffer */
if (hdtr && hdtr->numtrailers) {
apr_size_t tail_length = tfb.TailLength;
ptfb = &tfb;
rv = collapse_iovec((char**) &ptfb->Tail, &tail_length,
hdtr->trailers, hdtr->numtrailers,
hdtrbuf + ptfb->HeadLength,
sizeof(hdtrbuf) - ptfb->HeadLength);
tfb.TailLength = (DWORD)tail_length;
if (rv == APR_INCOMPLETE) {
/* If not enough buffer, punt to sendv, later */
sendv_trailers = 1;
}
}
/* Disconnect the socket after last send */
if ((flags & APR_SENDFILE_DISCONNECT_SOCKET)
&& !sendv_trailers) {
dwFlags |= TF_REUSE_SOCKET;
dwFlags |= TF_DISCONNECT;
disconnected = 1;
}
}
sock->overlapped->Offset = (DWORD)(curoff);
#if APR_HAS_LARGE_FILES
sock->overlapped->OffsetHigh = (DWORD)(curoff >> 32);
#endif
/* XXX BoundsChecker claims dwFlags must not be zero. */
rv = TransmitFile(sock->socketdes, /* socket */
file->filehand, /* open file descriptor of the file to be sent */
xmitbytes, /* number of bytes to send. 0=send all */
0, /* Number of bytes per send. 0=use default */
sock->overlapped, /* OVERLAPPED structure */
ptfb, /* header and trailer buffers */
dwFlags); /* flags to control various aspects of TransmitFile */
if (!rv) {
status = apr_get_netos_error();
if ((status == APR_FROM_OS_ERROR(ERROR_IO_PENDING)) ||
(status == APR_FROM_OS_ERROR(WSA_IO_PENDING)))
{
rv = WaitForSingleObject(sock->overlapped->hEvent,
(DWORD)(sock->timeout >= 0
? sock->timeout_ms : INFINITE));
if (rv == WAIT_OBJECT_0) {
status = APR_SUCCESS;
if (!disconnected) {
if (!WSAGetOverlappedResult(sock->socketdes,
sock->overlapped,
&xmitbytes,
FALSE,
&dwFlags)) {
status = apr_get_netos_error();
}
/* Ugly code alert: WSAGetOverlappedResult returns
* a count of all bytes sent. This loop only
* tracks bytes sent out of the file.
*/
else if (ptfb) {
xmitbytes -= (ptfb->HeadLength + ptfb->TailLength);
}
}
}
else if (rv == WAIT_TIMEOUT) {
status = APR_FROM_OS_ERROR(WAIT_TIMEOUT);
}
else if (rv == WAIT_ABANDONED) {
/* Hummm... WAIT_ABANDONDED is not an error code. It is
* a return specific to the Win32 WAIT functions that
* indicates that a thread exited while holding a
* mutex. Should consider triggering an assert
* to detect the condition...
*/
status = APR_FROM_OS_ERROR(WAIT_TIMEOUT);
}
else
status = apr_get_os_error();
}
}
if (status != APR_SUCCESS)
break;
bytes_to_send -= xmitbytes;
curoff += xmitbytes;
*len += xmitbytes;
/* Adjust len for any headers/trailers sent */
if (ptfb) {
*len += (ptfb->HeadLength + ptfb->TailLength);
memset(&tfb, '\0', sizeof (tfb));
ptfb = NULL;
}
}
if (status == APR_SUCCESS) {
if (sendv_trailers) {
rv = apr_socket_sendv(sock, hdtr->trailers, hdtr->numtrailers, &nbytes);
if (rv != APR_SUCCESS)
return rv;
*len += nbytes;
}
/* Mark the socket as disconnected, but do not close it.
* Note: The application must have stored the socket prior to making
* the call to apr_socket_sendfile in order to either reuse it
* or close it.
*/
if (disconnected) {
sock->disconnected = 1;
sock->socketdes = INVALID_SOCKET;
}
}
return status;
}
#endif