freeswitch/conf/conference.conf.xml

90 lines
4.3 KiB
XML

<!-- None of these paths are real if you want any of these options you need to really set them up -->
<configuration name="conference.conf" description="Audio Conference">
<!-- Advertise certian presence on startup . -->
<advertise>
<room name="888@sub.mydomain.com" status="FreeSWITCH"/>
</advertise>
<!-- These are the default keys that map when you do not specify a caller control group -->
<!-- Note: none and default are reserved names for group names -->
<caller-controls>
<group name="default">
<control action="mute" digits="0"/>
<control action="deaf mute" digits="*"/>
<control action="energy up" digits="9"/>
<control action="energy equ" digits="8"/>
<control action="energy dn" digits="7"/>
<control action="vol talk up" digits="3"/>
<control action="vol talk zero" digits="2"/>
<control action="vol talk dn" digits="1"/>
<control action="vol listen up" digits="6"/>
<control action="vol listen zero" digits="5"/>
<control action="vol listen dn" digits="4"/>
<control action="hangup" digits="#"/>
</group>
</caller-controls>
<!-- Profiles are collections of settings you can reference by name. -->
<profiles>
<!--If no profile is specified it will default to "default"-->
<profile name="default">
<!-- Domain (for presence) -->
<param name="domain" value="sub.mydomain.com"/>
<!-- Sample Rate-->
<param name="rate" value="8000"/>
<!-- Number of milliseconds per frame -->
<param name="interval" value="20"/>
<!-- Energy level required for audio to be sent to the other users -->
<param name="energy-level" value="300"/>
<!--Can be | delim of waste|mute|deaf waste will always transmit data to each channel
even during silence -->
<!--<param name="member-flags" value="waste"/>-->
<!-- Name of the caller control group to use for this profile -->
<!-- <param name="caller-controls" value="some name"/> -->
<!-- TTS Engine to use -->
<!--<param name="tts-engine" value="cepstral"/>-->
<!-- TTS Voice to use -->
<!--<param name="tts-voice" value="david"/>-->
<!-- If TTS is enabled all audio-file params beginning with -->
<!-- 'say:' will be considered text to say with TTS -->
<!-- Set a default path here so you can use relative paths in the other sound params-->
<!--<param name="sound-prefix" value="/soundfiles"/>-->
<!-- File to play to acknowledge succees -->
<!--<param name="ack-sound" value="beep.wav"/>-->
<!-- File to play to acknowledge failure -->
<!--<param name="nack-sound" value="beeperr.wav"/>-->
<!-- File to play to acknowledge muted -->
<!--<param name="muted-sound" value="muted.wav"/>-->
<!-- File to play to acknowledge unmuted -->
<!--<param name="unmuted-sound" value="unmuted.wav"/>-->
<!-- File to play if you are alone in the conference -->
<!--<param name="alone-sound" value="yactopitc.wav"/>-->
<!-- File to play when you join the conference -->
<!--<param name="enter-sound" value="welcome.wav"/>-->
<!-- File to play when you leave the conference -->
<!--<param name="exit-sound" value="exit.wav"/>-->
<!-- File to play when you ae ejected from the conference -->
<!--<param name="kicked-sound" value="kicked.wav"/>-->
<!-- File to play when the conference is locked -->
<!--<param name="locked-sound" value="locked.wav"/>-->
<!-- File to play when the conference is locked during the call-->
<!--<param name="is-locked-sound" value="is-locked.wav"/>-->
<!-- File to play when the conference is unlocked during the call-->
<!--<param name="is-unlocked-sound" value="is-unlocked.wav"/>-->
<!-- File to play to prompt for a pin -->
<!--<param name="pin-sound" value="pin.wav"/>-->
<!-- File to play to when the pin is invalid -->
<!--<param name="bad-pin-sound" value="invalid-pin.wav"/>-->
<!-- Conference pin -->
<!--<param name="pin" value="12345"/>-->
<!-- Default Caller ID Name for outbound calls -->
<param name="caller-id-name" value="FreeSWITCH"/>
<!-- Default Caller ID Number for outbound calls -->
<param name="caller-id-number" value="8777423583"/>
</profile>
</profiles>
</configuration>