add more stuff for rpm's

git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@6366 d0543943-73ff-0310-b7d9-9358b9ac24b2

build/curses.patch

@@ -0,0 +1,13 @@
+Index: Makefile.am
+===================================================================
+--- Makefile.am	(revision 5682)
++++ Makefile.am	(working copy)
+@@ -133,7 +133,7 @@
+ if ADD_LIBEDIT
+ CORE_CFLAGS    += -Ilibs/libedit/src -DSWITCH_HAVE_LIBEDIT
+ CORE_LIBS      += libs/libedit/src/.libs/libedit.a
+-freeswitch_LDADD += -lcurses
++freeswitch_LDADD += -lncurses
+ endif
+ 
+ 

build/freeswitch.init

@@ -0,0 +1,283 @@
+#!/bin/sh
+#
+#     Template SUSE system startup script for example service/daemon FREESWITCH
+#     Copyright (C) 1995--2005  Kurt Garloff, SUSE / Novell Inc.
+#          
+#     This library is free software; you can redistribute it and/or modify it
+#     under the terms of the GNU Lesser General Public License as published by
+#     the Free Software Foundation; either version 2.1 of the License, or (at
+#     your option) any later version.
+#			      
+#     This library is distributed in the hope that it will be useful, but
+#     WITHOUT ANY WARRANTY; without even the implied warranty of
+#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+#     Lesser General Public License for more details.
+#      
+#     You should have received a copy of the GNU Lesser General Public
+#     License along with this library; if not, write to the Free Software
+#     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307,
+#     USA.
+#
+# /etc/init.d/freeswitch
+#   and its symbolic link
+# /(usr/)sbin/rcfreeswitch
+#
+# Template system startup script for some example service/daemon FREESWITCH
+#
+# LSB compatible service control script; see http://www.linuxbase.org/spec/
+# 
+# Note: This template uses functions rc_XXX defined in /etc/rc.status on
+# UnitedLinux/SUSE/Novell based Linux distributions. If you want to base your
+# script on this template and ensure that it works on non UL based LSB 
+# compliant Linux distributions, you either have to provide the rc.status
+# functions from UL or change the script to work without them.
+# See skeleton.compat for a template that works with other distros as well.
+#
+### BEGIN INIT INFO
+# Provides:          freeswitch
+# Required-Start:    $syslog $remote_fs
+# Should-Start:      $time ypbind sendmail mysql postgresql
+# Required-Stop:     $syslog $remote_fs
+# Should-Stop: $time ypbind sendmail
+# Default-Start:     3 5
+# Default-Stop:      0 1 2 6
+# Short-Description: FREESWITCH XYZ daemon providing ZYX
+# Description:       Start FREESWITCH to allow XY and provide YZ
+#	continued on second line by '#<TAB>'
+#	should contain enough info for the runlevel editor
+#	to give admin some idea what this service does and
+#	what it's needed for ...
+#	(The Short-Description should already be a good hint.)
+### END INIT INFO
+# 
+# Any extensions to the keywords given above should be preceeded by 
+# X-VendorTag- (X-UnitedLinux- X-SuSE- for us) according to LSB.
+# 
+# Notes on Required-Start/Should-Start:
+# * There are two different issues that are solved by Required-Start
+#    and Should-Start
+# (a) Hard dependencies: This is used by the runlevel editor to determine
+#     which services absolutely need to be started to make the start of
+#     this service make sense. Example: nfsserver should have
+#     Required-Start: $portmap
+#     Also, required services are started before the dependent ones.
+#     The runlevel editor will warn about such missing hard dependencies
+#     and suggest enabling. During system startup, you may expect an error,
+#     if the dependency is not fulfilled.
+# (b) Specifying the init script ordering, not real (hard) dependencies.
+#     This is needed by insserv to determine which service should be
+#     started first (and at a later stage what services can be started
+#     in parallel). The tag Should-Start: is used for this.
+#     It tells, that if a service is available, it should be started
+#     before. If not, never mind.
+# * When specifying hard dependencies or ordering requirements, you can 
+#   use names of services (contents of their Provides: section)
+#   or pseudo names starting with a $. The following ones are available
+#   according to LSB (1.1):
+#	$local_fs		all local file systems are mounted
+#				(most services should need this!)
+#	$remote_fs		all remote file systems are mounted
+#				(note that /usr may be remote, so
+#				 many services should Require this!)
+#	$syslog			system logging facility up
+#	$network		low level networking (eth card, ...)
+#	$named			hostname resolution available
+#	$netdaemons		all network daemons are running
+#   The $netdaemons pseudo service has been removed in LSB 1.2.
+#   For now, we still offer it for backward compatibility.
+#   These are new (LSB 1.2):
+#	$time			the system time has been set correctly	
+#	$portmap		SunRPC portmapping service available
+#   UnitedLinux extensions:
+#	$ALL			indicates that a script should be inserted
+#				at the end
+# * The services specified in the stop tags 
+#   (Required-Stop/Should-Stop)
+#   specify which services need to be still running when this service
+#   is shut down. Often the entries there are just copies or a subset 
+#   from the respective start tag.
+# * Should-Start/Stop are now part of LSB as of 2.0,
+#   formerly SUSE/Unitedlinux used X-UnitedLinux-Should-Start/-Stop.
+#   insserv does support both variants.
+# * X-UnitedLinux-Default-Enabled: yes/no is used at installation time
+#   (%fillup_and_insserv macro in %post of many RPMs) to specify whether
+#   a startup script should default to be enabled after installation.
+#   It's not used by insserv.
+#
+# Note on runlevels:
+# 0 - halt/poweroff 			6 - reboot
+# 1 - single user			2 - multiuser without network exported
+# 3 - multiuser w/ network (text mode)  5 - multiuser w/ network and X11 (xdm)
+# 
+# Note on script names:
+# http://www.linuxbase.org/spec/refspecs/LSB_1.3.0/gLSB/gLSB/scrptnames.html
+# A registry has been set up to manage the init script namespace.
+# http://www.lanana.org/
+# Please use the names already registered or register one or use a
+# vendor prefix.
+
+
+# Check for missing binaries (stale symlinks should not happen)
+# Note: Special treatment of stop for LSB conformance
+FREESWITCH_BIN=/usr/bin/freeswitch
+test -x $FREESWITCH_BIN || { echo "$FREESWITCH_BIN not installed"; 
+	if [ "$1" = "stop" ]; then exit 0;
+	else exit 5; fi; }
+
+# Check for existence of needed config file and read it
+FREESWITCH_CONFIG=/etc/sysconfig/freeswitch
+test -r $FREESWITCH_CONFIG || { echo "$FREESWITCH_CONFIG not existing";
+	if [ "$1" = "stop" ]; then exit 0;
+	else exit 6; fi; }
+
+# Read config	
+. $FREESWITCH_CONFIG
+
+# Source LSB init functions
+# providing start_daemon, killproc, pidofproc, 
+# log_success_msg, log_failure_msg and log_warning_msg.
+# This is currently not used by UnitedLinux based distributions and
+# not needed for init scripts for UnitedLinux only. If it is used,
+# the functions from rc.status should not be sourced or used.
+#. /lib/lsb/init-functions
+
+# Shell functions sourced from /etc/rc.status:
+#      rc_check         check and set local and overall rc status
+#      rc_status        check and set local and overall rc status
+#      rc_status -v     be verbose in local rc status and clear it afterwards
+#      rc_status -v -r  ditto and clear both the local and overall rc status
+#      rc_status -s     display "skipped" and exit with status 3
+#      rc_status -u     display "unused" and exit with status 3
+#      rc_failed        set local and overall rc status to failed
+#      rc_failed <num>  set local and overall rc status to <num>
+#      rc_reset         clear both the local and overall rc status
+#      rc_exit          exit appropriate to overall rc status
+#      rc_active        checks whether a service is activated by symlinks
+. /etc/rc.status
+
+# Reset status of this service
+rc_reset
+
+# Return values acc. to LSB for all commands but status:
+# 0	  - success
+# 1       - generic or unspecified error
+# 2       - invalid or excess argument(s)
+# 3       - unimplemented feature (e.g. "reload")
+# 4       - user had insufficient privileges
+# 5       - program is not installed
+# 6       - program is not configured
+# 7       - program is not running
+# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
+# 
+# Note that starting an already running service, stopping
+# or restarting a not-running service as well as the restart
+# with force-reload (in case signaling is not supported) are
+# considered a success.
+
+case "$1" in
+    start)
+	echo -n "Starting FreeSWITCH "
+	## Start daemon with startproc(8). If this fails
+	## the return value is set appropriately by startproc.
+	/sbin/startproc $FREESWITCH_BIN $FREESWITCH_PARAMS
+
+	# Remember status and be verbose
+	rc_status -v
+	;;
+    stop)
+	echo -n "Shutting down FreeSWITCH "
+	## Stop daemon with killproc(8) and if this fails
+	## killproc sets the return value according to LSB.
+
+	/sbin/killproc -TERM $FREESWITCH_BIN
+
+	# Remember status and be verbose
+	rc_status -v
+	;;
+    try-restart|condrestart)
+	## Do a restart only if the service was active before.
+	## Note: try-restart is now part of LSB (as of 1.9).
+	## RH has a similar command named condrestart.
+	if test "$1" = "condrestart"; then
+		echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
+	fi
+	$0 status
+	if test $? = 0; then
+		$0 restart
+	else
+		rc_reset	# Not running is not a failure.
+	fi
+	# Remember status and be quiet
+	rc_status
+	;;
+    restart)
+	## Stop the service and regardless of whether it was
+	## running or not, start it again.
+	$0 stop
+	$0 start
+
+	# Remember status and be quiet
+	rc_status
+	;;
+    force-reload)
+	## Signal the daemon to reload its config. Most daemons
+	## do this on signal 1 (SIGHUP).
+	## If it does not support it, restart the service if it
+	## is running.
+
+	echo -n "Reload service FreeSWITCH "
+	## if it supports it:
+	/sbin/killproc -HUP $FREESWITCH_BIN
+	#touch /var/run/FREESWITCH.pid
+	rc_status -v
+
+	## Otherwise:
+	#$0 try-restart
+	#rc_status
+	;;
+    reload)
+	## Like force-reload, but if daemon does not support
+	## signaling, do nothing (!)
+
+	# If it supports signaling:
+	echo -n "Reload service FreeSWITCH "
+	/sbin/killproc -HUP $FREESWITCH_BIN
+	#touch /var/run/FREESWITCH.pid
+	rc_status -v
+	
+	## Otherwise if it does not support reload:
+	#rc_failed 3
+	#rc_status -v
+	;;
+    status)
+	echo -n "Checking for service FreeSWITCH "
+	## Check status with checkproc(8), if process is running
+	## checkproc will return with exit status 0.
+
+	# Return value is slightly different for the status command:
+	# 0 - service up and running
+	# 1 - service dead, but /var/run/  pid  file exists
+	# 2 - service dead, but /var/lock/ lock file exists
+	# 3 - service not running (unused)
+	# 4 - service status unknown :-(
+	# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
+	
+	# NOTE: checkproc returns LSB compliant status values.
+	/sbin/checkproc $FREESWITCH_BIN
+	# NOTE: rc_status knows that we called this init script with
+	# "status" option and adapts its messages accordingly.
+	rc_status -v
+	;;
+    probe)
+	## Optional: Probe for the necessity of a reload, print out the
+	## argument to this init script which is required for a reload.
+	## Note: probe is not (yet) part of LSB (as of 1.9)
+
+	test /opt/freeswitch/conf/freeswitch.xml -nt /opt/freeswitch/log/freeswitch.pid && echo reload
+	;;
+    *)
+	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
+	exit 1
+	;;
+esac
+rc_exit

build/freeswitch.ld.so.conf

@@ -0,0 +1 @@
+/opt/freeswitch/lib

build/freeswitch.sysconfig

@@ -0,0 +1,9 @@
+## Type:                string
+## Default:             ""
+## Config:              ""
+## ServiceRestart:      freeswitch
+#
+# if not empty: parameters for freeswitch
+# for example FREESWITCH_PARAMS="-nc"
+#
+FREESWITCH_PARAMS="-nc"