forked from Mirrors/freeswitch
tweak testing config #ignoreme
This commit is contained in:
parent
367e104773
commit
4b75434069
|
@ -1,28 +1,10 @@
|
|||
<configuration name="opus.conf">
|
||||
<settings>
|
||||
<param name="use-vbr" value="1"/>
|
||||
<!--<param name="use-dtx" value="1"/>-->
|
||||
<param name="complexity" value="10"/>
|
||||
<!-- Set the initial packet loss percentage 0-100 -->
|
||||
<!--<param name="packet-loss-percent" value="10"/>-->
|
||||
<!-- Support asymmetric sample rates -->
|
||||
<!--<param name="asymmetric-sample-rates" value="1"/>-->
|
||||
<!-- Keep FEC Enabled -->
|
||||
<param name="keep-fec-enabled" value="1"/>
|
||||
|
||||
<!--
|
||||
maxaveragebitrate: the maximum average codec bitrate (values: 6000 to 510000 in bps) 0 is not considered
|
||||
maxplaybackrate: the maximum codec internal frequency (values: 8000, 12000, 16000, 24000, 48000 in Hz) 0 is not considered
|
||||
This will set the local encoder and instruct the remote encoder trough specific "fmtp" attibute in the SDP.
|
||||
|
||||
Example: if you receive "maxaveragebitrate=20000" from SDP and you have set "maxaveragebitrate=24000" in this configuration
|
||||
the lowest will prevail in this case "20000" is set on the encoder and the corresponding fmtp attribute will be set
|
||||
to instruct the remote encoder to do the same.
|
||||
-->
|
||||
<param name="maxaveragebitrate" value="0"/>
|
||||
<param name="maxplaybackrate" value="0"/>
|
||||
<!-- Max capture rate, 8000, 12000, 16000, 24000 and 48000 are valid options -->
|
||||
<!--<param name="sprop-maxcapturerate" value="0"/>-->
|
||||
|
||||
</settings>
|
||||
<settings>
|
||||
<param name="use-vbr" value="0"/>
|
||||
<param name="use-dtx" value="1"/>
|
||||
<param name="useinbandfec" value="1"/>
|
||||
<param name="complexity" value="10"/>
|
||||
<param name="use-jb-lookahead" value="true"/>
|
||||
<param name="keep-fec-enabled" value="true"/>
|
||||
</settings>
|
||||
</configuration>
|
||||
|
|
Loading…
Reference in New Issue