freeswitch/libs/portaudio/config.sub

1490 lines
29 KiB
Plaintext
Raw Normal View History

New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
#! /bin/sh
# Configuration validation subroutine script.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
timestamp='2003-02-22'
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
# can handle that machine. It does not imply ALL GNU software can.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Please send patches to <config-patches@gnu.org>. Submit a context
# diff and a properly formatted ChangeLog entry.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.
# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
# that are meaningful with *any* GNU software.
# Each package is responsible for reporting which valid configurations
# it does not support. The user should be able to distinguish
# a failure to support a valid configuration from a meaningless
# configuration.
# The goal of this file is to map all the various variations of a given
# machine specification into a single specification in the form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
# or in some cases, the newer four-part form:
# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
# It is wrong to echo any other type of specification.
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
Usage: $0 [OPTION] CPU-MFR-OPSYS
$0 [OPTION] ALIAS
Canonicalize a configuration name.
Operation modes:
-h, --help print this help, then exit
-t, --time-stamp print date of last modification, then exit
-v, --version print version number, then exit
Report bugs and patches to <config-patches@gnu.org>."
version="\
GNU config.sub ($timestamp)
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
help="
Try \`$me --help' for more information."
# Parse command line
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
echo "$timestamp" ; exit 0 ;;
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
--version | -v )
echo "$version" ; exit 0 ;;
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
--help | --h* | -h )
echo "$usage"; exit 0 ;;
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
break ;;
-* )
echo "$me: invalid option $1$help"
exit 1 ;;
*local*)
# First pass through any local machine types.
echo $1
exit 0;;
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
* )
break ;;
esac
done
case $# in
0) echo "$me: missing argument$help" >&2
exit 1;;
1) ;;
*) echo "$me: too many arguments$help" >&2
exit 1;;
esac
# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
*)
basic_machine=`echo $1 | sed 's/-[^-]*$//'`
if [ $basic_machine != $1 ]
then os=`echo $1 | sed 's/.*-/-/'`
else os=; fi
;;
esac
### Let's recognize common machines as not being operating systems so
### that things like config.sub decstation-3100 work. We also
### recognize some manufacturers as not being operating systems, so we
### can provide default operating systems below.
case $os in
-sun*os*)
# Prevent following clause from handling this invalid input.
;;
-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-apple | -axis)
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
os=
basic_machine=$1
;;
-sim | -cisco | -oki | -wec | -winbond)
os=
basic_machine=$1
;;
-scout)
;;
-wrs)
os=-vxworks
basic_machine=$1
;;
-chorusos*)
os=-chorusos
basic_machine=$1
;;
-chorusrdb)
os=-chorusrdb
basic_machine=$1
;;
-hiux*)
os=-hiuxwe2
;;
-sco5)
os=-sco3.2v5
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco4)
os=-sco3.2v4
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2.[4-9]*)
os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2v[4-9]*)
# Don't forget version if it is 3.2v4 or newer.
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco*)
os=-sco3.2v2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-udk*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-isc)
os=-isc2.2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-clix*)
basic_machine=clipper-intergraph
;;
-isc*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-lynx*)
os=-lynxos
;;
-ptx*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
;;
-windowsnt*)
os=`echo $os | sed -e 's/windowsnt/winnt/'`
;;
-psos*)
os=-psos
;;
-mint | -mint[0-9]*)
basic_machine=m68k-atari
os=-mint
;;
esac
# Decode aliases for certain CPU-COMPANY combinations.
case $basic_machine in
# Recognize the basic CPU types without company name.
# Some are omitted here because they have special meanings below.
1750a | 580 \
| a29k \
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
| clipper \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| d10v | d30v | dlx | dsp16xx \
| fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| i370 | i860 | i960 | ia64 \
| ip2k \
| m32r | m68000 | m68k | m88k | mcore \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
| mips64vr | mips64vrel \
| mips64orion | mips64orionel \
| mips64vr4100 | mips64vr4100el \
| mips64vr4300 | mips64vr4300el \
| mips64vr5000 | mips64vr5000el \
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
| mipsisa64 | mipsisa64el \
| mipsisa64sb1 | mipsisa64sb1el \
| mipsisa64sr71k | mipsisa64sr71kel \
| mipstx39 | mipstx39el \
| mn10200 | mn10300 \
| msp430 \
| ns16k | ns32k \
| openrisc | or32 \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
| pyramid \
| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| sh64 | sh64le \
| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| strongarm \
| tahoe | thumb | tic80 | tron \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| v850 | v850e \
| we32k \
| x86 | xscale | xstormy16 | xtensa \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| z8k)
basic_machine=$basic_machine-unknown
;;
m6811 | m68hc11 | m6812 | m68hc12)
# Motorola 68HC11/12.
basic_machine=$basic_machine-unknown
os=-none
;;
m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
;;
# We use `pc' rather than `unknown'
# because (1) that's what they normally are, and
# (2) the word "unknown" tends to confuse beginning users.
i*86 | x86_64)
basic_machine=$basic_machine-pc
;;
# Object if more than one company name word.
*-*-*)
echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
exit 1
;;
# Recognize the basic CPU types with company name.
580-* \
| a29k-* \
| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* \
| bs2000-* \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
| clipper-* | cydra-* \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| d10v-* | d30v-* | dlx-* \
| elxsi-* \
| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
| i*86-* | i860-* | i960-* | ia64-* \
| ip2k-* \
| m32r-* \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
| m88110-* | m88k-* | mcore-* \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| mips16-* \
| mips64-* | mips64el-* \
| mips64vr-* | mips64vrel-* \
| mips64orion-* | mips64orionel-* \
| mips64vr4100-* | mips64vr4100el-* \
| mips64vr4300-* | mips64vr4300el-* \
| mips64vr5000-* | mips64vr5000el-* \
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
| mipsisa64-* | mipsisa64el-* \
| mipsisa64sb1-* | mipsisa64sb1el-* \
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
| mipstx39-* | mipstx39el-* \
| msp430-* \
| none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| orion-* \
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
| pyramid-* \
| romp-* | rs6000-* \
| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| tahoe-* | thumb-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
| tron-* \
| v850-* | v850e-* | vax-* \
| we32k-* \
| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
| xtensa-* \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| ymp-* \
| z8k-*)
;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
386bsd)
basic_machine=i386-unknown
os=-bsd
;;
3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
basic_machine=m68000-att
;;
3b*)
basic_machine=we32k-att
;;
a29khif)
basic_machine=a29k-amd
os=-udi
;;
adobe68k)
basic_machine=m68010-adobe
os=-scout
;;
alliant | fx80)
basic_machine=fx80-alliant
;;
altos | altos3068)
basic_machine=m68k-altos
;;
am29k)
basic_machine=a29k-none
os=-bsd
;;
amdahl)
basic_machine=580-amdahl
os=-sysv
;;
amiga | amiga-*)
basic_machine=m68k-unknown
;;
amigaos | amigados)
basic_machine=m68k-unknown
os=-amigaos
;;
amigaunix | amix)
basic_machine=m68k-unknown
os=-sysv4
;;
apollo68)
basic_machine=m68k-apollo
os=-sysv
;;
apollo68bsd)
basic_machine=m68k-apollo
os=-bsd
;;
aux)
basic_machine=m68k-apple
os=-aux
;;
balance)
basic_machine=ns32k-sequent
os=-dynix
;;
c90)
basic_machine=c90-cray
os=-unicos
;;
convex-c1)
basic_machine=c1-convex
os=-bsd
;;
convex-c2)
basic_machine=c2-convex
os=-bsd
;;
convex-c32)
basic_machine=c32-convex
os=-bsd
;;
convex-c34)
basic_machine=c34-convex
os=-bsd
;;
convex-c38)
basic_machine=c38-convex
os=-bsd
;;
cray | j90)
basic_machine=j90-cray
os=-unicos
;;
crds | unos)
basic_machine=m68k-crds
;;
cris | cris-* | etrax*)
basic_machine=cris-axis
;;
da30 | da30-*)
basic_machine=m68k-da30
;;
decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
basic_machine=mips-dec
;;
decsystem10* | dec10*)
basic_machine=pdp10-dec
os=-tops10
;;
decsystem20* | dec20*)
basic_machine=pdp10-dec
os=-tops20
;;
delta | 3300 | motorola-3300 | motorola-delta \
| 3300-motorola | delta-motorola)
basic_machine=m68k-motorola
;;
delta88)
basic_machine=m88k-motorola
os=-sysv3
;;
dpx20 | dpx20-*)
basic_machine=rs6000-bull
os=-bosx
;;
dpx2* | dpx2*-bull)
basic_machine=m68k-bull
os=-sysv3
;;
ebmon29k)
basic_machine=a29k-amd
os=-ebmon
;;
elxsi)
basic_machine=elxsi-elxsi
os=-bsd
;;
encore | umax | mmax)
basic_machine=ns32k-encore
;;
es1800 | OSE68k | ose68k | ose | OSE)
basic_machine=m68k-ericsson
os=-ose
;;
fx2800)
basic_machine=i860-alliant
;;
genix)
basic_machine=ns32k-ns
;;
gmicro)
basic_machine=tron-gmicro
os=-sysv
;;
go32)
basic_machine=i386-pc
os=-go32
;;
h3050r* | hiux*)
basic_machine=hppa1.1-hitachi
os=-hiuxwe2
;;
h8300hms)
basic_machine=h8300-hitachi
os=-hms
;;
h8300xray)
basic_machine=h8300-hitachi
os=-xray
;;
h8500hms)
basic_machine=h8500-hitachi
os=-hms
;;
harris)
basic_machine=m88k-harris
os=-sysv3
;;
hp300-*)
basic_machine=m68k-hp
;;
hp300bsd)
basic_machine=m68k-hp
os=-bsd
;;
hp300hpux)
basic_machine=m68k-hp
os=-hpux
;;
hp3k9[0-9][0-9] | hp9[0-9][0-9])
basic_machine=hppa1.0-hp
;;
hp9k2[0-9][0-9] | hp9k31[0-9])
basic_machine=m68000-hp
;;
hp9k3[2-9][0-9])
basic_machine=m68k-hp
;;
hp9k6[0-9][0-9] | hp6[0-9][0-9])
basic_machine=hppa1.0-hp
;;
hp9k7[0-79][0-9] | hp7[0-79][0-9])
basic_machine=hppa1.1-hp
;;
hp9k78[0-9] | hp78[0-9])
# FIXME: really hppa2.0-hp
basic_machine=hppa1.1-hp
;;
hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
# FIXME: really hppa2.0-hp
basic_machine=hppa1.1-hp
;;
hp9k8[0-9][13679] | hp8[0-9][13679])
basic_machine=hppa1.1-hp
;;
hp9k8[0-9][0-9] | hp8[0-9][0-9])
basic_machine=hppa1.0-hp
;;
hppa-next)
os=-nextstep3
;;
hppaosf)
basic_machine=hppa1.1-hp
os=-osf
;;
hppro)
basic_machine=hppa1.1-hp
os=-proelf
;;
i370-ibm* | ibm*)
basic_machine=i370-ibm
;;
# I'm not sure what "Sysv32" means. Should this be sysv3.2?
i*86v32)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv32
;;
i*86v4*)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv4
;;
i*86v)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv
;;
i*86sol2)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-solaris2
;;
i386mach)
basic_machine=i386-mach
os=-mach
;;
i386-vsta | vsta)
basic_machine=i386-unknown
os=-vsta
;;
iris | iris4d)
basic_machine=mips-sgi
case $os in
-irix*)
;;
*)
os=-irix4
;;
esac
;;
isi68 | isi)
basic_machine=m68k-isi
os=-sysv
;;
m88k-omron*)
basic_machine=m88k-omron
;;
magnum | m3230)
basic_machine=mips-mips
os=-sysv
;;
merlin)
basic_machine=ns32k-utek
os=-sysv
;;
mingw32)
basic_machine=i386-pc
os=-mingw32
;;
miniframe)
basic_machine=m68000-convergent
;;
*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
basic_machine=m68k-atari
os=-mint
;;
mips3*-*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
;;
mips3*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
;;
mmix*)
basic_machine=mmix-knuth
os=-mmixware
;;
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
monitor)
basic_machine=m68k-rom68k
os=-coff
;;
morphos)
basic_machine=powerpc-unknown
os=-morphos
;;
msdos)
basic_machine=i386-pc
os=-msdos
;;
mvs)
basic_machine=i370-ibm
os=-mvs
;;
ncr3000)
basic_machine=i486-ncr
os=-sysv4
;;
netbsd386)
basic_machine=i386-unknown
os=-netbsd
;;
netwinder)
basic_machine=armv4l-rebel
os=-linux
;;
news | news700 | news800 | news900)
basic_machine=m68k-sony
os=-newsos
;;
news1000)
basic_machine=m68030-sony
os=-newsos
;;
news-3600 | risc-news)
basic_machine=mips-sony
os=-newsos
;;
necv70)
basic_machine=v70-nec
os=-sysv
;;
next | m*-next )
basic_machine=m68k-next
case $os in
-nextstep* )
;;
-ns2*)
os=-nextstep2
;;
*)
os=-nextstep3
;;
esac
;;
nh3000)
basic_machine=m68k-harris
os=-cxux
;;
nh[45]000)
basic_machine=m88k-harris
os=-cxux
;;
nindy960)
basic_machine=i960-intel
os=-nindy
;;
mon960)
basic_machine=i960-intel
os=-mon960
;;
nonstopux)
basic_machine=mips-compaq
os=-nonstopux
;;
np1)
basic_machine=np1-gould
;;
nv1)
basic_machine=nv1-cray
os=-unicosmp
;;
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
nsr-tandem)
basic_machine=nsr-tandem
;;
op50n-* | op60c-*)
basic_machine=hppa1.1-oki
os=-proelf
;;
or32 | or32-*)
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
basic_machine=or32-unknown
os=-coff
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
;;
OSE68000 | ose68000)
basic_machine=m68000-ericsson
os=-ose
;;
os68k)
basic_machine=m68k-none
os=-os68k
;;
pa-hitachi)
basic_machine=hppa1.1-hitachi
os=-hiuxwe2
;;
paragon)
basic_machine=i860-intel
os=-osf
;;
pbd)
basic_machine=sparc-tti
;;
pbb)
basic_machine=m68k-tti
;;
pc532 | pc532-*)
basic_machine=ns32k-pc532
;;
pentium | p5 | k5 | k6 | nexgen | viac3)
basic_machine=i586-pc
;;
pentiumpro | p6 | 6x86 | athlon | athlon_*)
basic_machine=i686-pc
;;
pentiumii | pentium2)
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
basic_machine=i686-pc
;;
pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentiumpro-* | p6-* | 6x86-* | athlon-*)
basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentiumii-* | pentium2-*)
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pn)
basic_machine=pn-gould
;;
power) basic_machine=power-ibm
;;
ppc) basic_machine=powerpc-unknown
;;
ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppcle | powerpclittle | ppc-le | powerpc-little)
basic_machine=powerpcle-unknown
;;
ppcle-* | powerpclittle-*)
basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppc64) basic_machine=powerpc64-unknown
;;
ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppc64le | powerpc64little | ppc64-le | powerpc64-little)
basic_machine=powerpc64le-unknown
;;
ppc64le-* | powerpc64little-*)
basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ps2)
basic_machine=i386-ibm
;;
pw32)
basic_machine=i586-unknown
os=-pw32
;;
rom68k)
basic_machine=m68k-rom68k
os=-coff
;;
rm[46]00)
basic_machine=mips-siemens
;;
rtpc | rtpc-*)
basic_machine=romp-ibm
;;
s390 | s390-*)
basic_machine=s390-ibm
;;
s390x | s390x-*)
basic_machine=s390x-ibm
;;
sa29200)
basic_machine=a29k-amd
os=-udi
;;
sb1)
basic_machine=mipsisa64sb1-unknown
;;
sb1el)
basic_machine=mipsisa64sb1el-unknown
;;
sequent)
basic_machine=i386-sequent
;;
sh)
basic_machine=sh-hitachi
os=-hms
;;
sparclite-wrs | simso-wrs)
basic_machine=sparclite-wrs
os=-vxworks
;;
sps7)
basic_machine=m68k-bull
os=-sysv2
;;
spur)
basic_machine=spur-unknown
;;
st2000)
basic_machine=m68k-tandem
;;
stratus)
basic_machine=i860-stratus
os=-sysv4
;;
sun2)
basic_machine=m68000-sun
;;
sun2os3)
basic_machine=m68000-sun
os=-sunos3
;;
sun2os4)
basic_machine=m68000-sun
os=-sunos4
;;
sun3os3)
basic_machine=m68k-sun
os=-sunos3
;;
sun3os4)
basic_machine=m68k-sun
os=-sunos4
;;
sun4os3)
basic_machine=sparc-sun
os=-sunos3
;;
sun4os4)
basic_machine=sparc-sun
os=-sunos4
;;
sun4sol2)
basic_machine=sparc-sun
os=-solaris2
;;
sun3 | sun3-*)
basic_machine=m68k-sun
;;
sun4)
basic_machine=sparc-sun
;;
sun386 | sun386i | roadrunner)
basic_machine=i386-sun
;;
sv1)
basic_machine=sv1-cray
os=-unicos
;;
symmetry)
basic_machine=i386-sequent
os=-dynix
;;
t3e)
basic_machine=alphaev5-cray
os=-unicos
;;
t90)
basic_machine=t90-cray
os=-unicos
;;
tic4x | c4x*)
basic_machine=tic4x-unknown
os=-coff
;;
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
tic54x | c54x*)
basic_machine=tic54x-unknown
os=-coff
;;
tic55x | c55x*)
basic_machine=tic55x-unknown
os=-coff
;;
tic6x | c6x*)
basic_machine=tic6x-unknown
os=-coff
;;
tx39)
basic_machine=mipstx39-unknown
;;
tx39el)
basic_machine=mipstx39el-unknown
;;
toad1)
basic_machine=pdp10-xkl
os=-tops20
;;
tower | tower-32)
basic_machine=m68k-ncr
;;
udi29k)
basic_machine=a29k-amd
os=-udi
;;
ultra3)
basic_machine=a29k-nyu
os=-sym1
;;
v810 | necv810)
basic_machine=v810-nec
os=-none
;;
vaxv)
basic_machine=vax-dec
os=-sysv
;;
vms)
basic_machine=vax-dec
os=-vms
;;
vpp*|vx|vx-*)
basic_machine=f301-fujitsu
;;
vxworks960)
basic_machine=i960-wrs
os=-vxworks
;;
vxworks68)
basic_machine=m68k-wrs
os=-vxworks
;;
vxworks29k)
basic_machine=a29k-wrs
os=-vxworks
;;
w65*)
basic_machine=w65-wdc
os=-none
;;
w89k-*)
basic_machine=hppa1.1-winbond
os=-proelf
;;
xps | xps100)
basic_machine=xps100-honeywell
;;
ymp)
basic_machine=ymp-cray
os=-unicos
;;
z8k-*-coff)
basic_machine=z8k-unknown
os=-sim
;;
none)
basic_machine=none-none
os=-none
;;
# Here we handle the default manufacturer of certain CPU types. It is in
# some cases the only manufacturer, in others, it is the most popular.
w89k)
basic_machine=hppa1.1-winbond
;;
op50n)
basic_machine=hppa1.1-oki
;;
op60c)
basic_machine=hppa1.1-oki
;;
romp)
basic_machine=romp-ibm
;;
rs6000)
basic_machine=rs6000-ibm
;;
vax)
basic_machine=vax-dec
;;
pdp10)
# there are many clones, so DEC is not a safe bet
basic_machine=pdp10-unknown
;;
pdp11)
basic_machine=pdp11-dec
;;
we32k)
basic_machine=we32k-att
;;
sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
basic_machine=sh-unknown
;;
sh64)
basic_machine=sh64-unknown
;;
sparc | sparcv9 | sparcv9b)
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
basic_machine=sparc-sun
;;
cydra)
basic_machine=cydra-cydrome
;;
orion)
basic_machine=orion-highlevel
;;
orion105)
basic_machine=clipper-highlevel
;;
mac | mpw | mac-mpw)
basic_machine=m68k-apple
;;
pmac | pmac-mpw)
basic_machine=powerpc-apple
;;
*-unknown)
# Make sure to match an already-canonicalized machine name.
;;
*)
echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
exit 1
;;
esac
# Here we canonicalize certain aliases for manufacturers.
case $basic_machine in
*-digital*)
basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
;;
*-commodore*)
basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
;;
*)
;;
esac
# Decode manufacturer-specific aliases for certain operating systems.
if [ x"$os" != x"" ]
then
case $os in
# First match some system type aliases
# that might get confused with valid system types.
# -solaris* is a basic system type, with this one exception.
-solaris1 | -solaris1.*)
os=`echo $os | sed -e 's|solaris1|sunos4|'`
;;
-solaris)
os=-solaris2
;;
-svr4*)
os=-sysv4
;;
-unixware*)
os=-sysv4.2uw
;;
-gnu/linux*)
os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
;;
# First accept the basic system types.
# The portable systems comes first.
# Each alternative MUST END IN A *, to match a version number.
# -sysv* is not here because it comes later, after sysvr4.
-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
| -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
| -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
| -aos* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
| -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
| -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
| -chorusos* | -chorusrdb* \
| -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
| -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix*)
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
case $basic_machine in
x86-* | i*86-*)
;;
*)
os=-nto$os
;;
esac
;;
-nto-qnx*)
;;
-nto*)
os=`echo $os | sed -e 's|nto|nto-qnx|'`
;;
-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
| -windows* | -osx | -abug | -netware* | -os9* | -beos* \
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
| -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
;;
-mac*)
os=`echo $os | sed -e 's|mac|macos|'`
;;
-linux*)
os=`echo $os | sed -e 's|linux|linux-gnu|'`
;;
-sunos5*)
os=`echo $os | sed -e 's|sunos5|solaris2|'`
;;
-sunos6*)
os=`echo $os | sed -e 's|sunos6|solaris3|'`
;;
-opened*)
os=-openedition
;;
-wince*)
os=-wince
;;
-osfrose*)
os=-osfrose
;;
-osf*)
os=-osf
;;
-utek*)
os=-bsd
;;
-dynix*)
os=-bsd
;;
-acis*)
os=-aos
;;
-atheos*)
os=-atheos
;;
-386bsd)
os=-bsd
;;
-ctix* | -uts*)
os=-sysv
;;
-nova*)
os=-rtmk-nova
;;
-ns2 )
os=-nextstep2
;;
-nsk*)
os=-nsk
;;
# Preserve the version number of sinix5.
-sinix5.*)
os=`echo $os | sed -e 's|sinix|sysv|'`
;;
-sinix*)
os=-sysv4
;;
-triton*)
os=-sysv3
;;
-oss*)
os=-sysv3
;;
-svr4)
os=-sysv4
;;
-svr3)
os=-sysv3
;;
-sysvr4)
os=-sysv4
;;
# This must come after -sysvr4.
-sysv*)
;;
-ose*)
os=-ose
;;
-es1800*)
os=-ose
;;
-xenix)
os=-xenix
;;
-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
os=-mint
;;
-aros*)
os=-aros
;;
-kaos*)
os=-kaos
;;
-none)
;;
*)
# Get rid of the `-' at the beginning of $os.
os=`echo $os | sed 's/[^-]*-//'`
echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
exit 1
;;
esac
else
# Here we handle the default operating systems that come with various machines.
# The value should be what the vendor currently ships out the door with their
# machine or put another way, the most popular os provided with the machine.
# Note that if you're going to try to match "-MANUFACTURER" here (say,
# "-sun"), then you have to tell the case statement up towards the top
# that MANUFACTURER isn't an operating system. Otherwise, code above
# will signal an error saying that MANUFACTURER isn't an operating
# system, and we'll never get to this point.
case $basic_machine in
*-acorn)
os=-riscix1.2
;;
arm*-rebel)
os=-linux
;;
arm*-semi)
os=-aout
;;
# This must come before the *-dec entry.
pdp10-*)
os=-tops20
;;
pdp11-*)
os=-none
;;
*-dec | vax-*)
os=-ultrix4.2
;;
m68*-apollo)
os=-domain
;;
i386-sun)
os=-sunos4.0.2
;;
m68000-sun)
os=-sunos3
# This also exists in the configure program, but was not the
# default.
# os=-sunos4
;;
m68*-cisco)
os=-aout
;;
mips*-cisco)
os=-elf
;;
mips*-*)
os=-elf
;;
or32-*)
os=-coff
;;
*-tti) # must be before sparc entry or we get the wrong os.
os=-sysv3
;;
sparc-* | *-sun)
os=-sunos4.1.1
;;
*-be)
os=-beos
;;
*-ibm)
os=-aix
;;
*-wec)
os=-proelf
;;
*-winbond)
os=-proelf
;;
*-oki)
os=-proelf
;;
*-hp)
os=-hpux
;;
*-hitachi)
os=-hiux
;;
i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
os=-sysv
;;
*-cbm)
os=-amigaos
;;
*-dg)
os=-dgux
;;
*-dolphin)
os=-sysv3
;;
m68k-ccur)
os=-rtu
;;
m88k-omron*)
os=-luna
;;
*-next )
os=-nextstep
;;
*-sequent)
os=-ptx
;;
*-crds)
os=-unos
;;
*-ns)
os=-genix
;;
i370-*)
os=-mvs
;;
*-next)
os=-nextstep3
;;
*-gould)
os=-sysv
;;
*-highlevel)
os=-bsd
;;
*-encore)
os=-bsd
;;
*-sgi)
os=-irix
;;
*-siemens)
os=-sysv4
;;
*-masscomp)
os=-rtu
;;
f30[01]-fujitsu | f700-fujitsu)
os=-uxpv
;;
*-rom68k)
os=-coff
;;
*-*bug)
os=-coff
;;
*-apple)
os=-macos
;;
*-atari*)
os=-mint
;;
*)
os=-none
;;
esac
fi
# Here we handle the case where we know the os, and the CPU type, but not the
# manufacturer. We pick the logical manufacturer.
vendor=unknown
case $basic_machine in
*-unknown)
case $os in
-riscix*)
vendor=acorn
;;
-sunos*)
vendor=sun
;;
-aix*)
vendor=ibm
;;
-beos*)
vendor=be
;;
-hpux*)
vendor=hp
;;
-mpeix*)
vendor=hp
;;
-hiux*)
vendor=hitachi
;;
-unos*)
vendor=crds
;;
-dgux*)
vendor=dg
;;
-luna*)
vendor=omron
;;
-genix*)
vendor=ns
;;
-mvs* | -opened*)
vendor=ibm
;;
-ptx*)
vendor=sequent
;;
-vxsim* | -vxworks* | -windiss*)
vendor=wrs
;;
-aux*)
vendor=apple
;;
-hms*)
vendor=hitachi
;;
-mpw* | -macos*)
vendor=apple
;;
-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
vendor=atari
;;
-vos*)
vendor=stratus
;;
esac
basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
;;
esac
echo $basic_machine$os
exit 0
New mod_portaudio (sponspred by eWorldCom http://www.eworldcom.hu/) This updates mod_portaudio to use the new v19 api and also contains major behavioural changes. This initial check-in should be tested to find any obscure use cases that lead to crashes etc... All of the old api interface commands are now depricated and any attempt to use them should cause a polite warning asking you to try the new single "pa" command. New Features: *) Mulitiple calls with hold/call switching. *) Inbound calls can play a ring file on specified device. (global and per call) *) Optional hold music for backgrounded calls. (global and per call) Example dialplan usage: <extension name="2000"> <condition field="destination_number" expression="^2000$"> <!--if the next 3 lines are omitted the defaults will be used from portaudio.conf--> <action application="set" data="pa_ring_file=/sounds/myring.wav"/> <action application="set" data="pa_hold_file=/sounds/myhold.wav"/> <action application="set" data="export_vars=pa_ring_file,pa_hold_file"/> <action application="bridge" data="portaudio"/> </condition> </extension> Example API interface usage: call extension 1000 > pa call 1000 call extension 1001 putting the other call on hold > pa call 1001 swap the calls between hold and active > pa switch view the current calls > pa list forground the call with id 1 > pa switch 1 background all calls > pa switch none send a dtmf string (1234) to the current call > pa dtmf 1234 answer the oldest unanswered inbound call > pa answer answer the call with id 1 > pa answer 1 hangup the active call > pa hangup hangup the call with id 1 > pa hangup 1 get device info > pa dump print usage summary > pa help USAGE: -------------------------------------------------------------------------------- pa help pa dump pa call <dest> [<dialplan> <cid_name> <cid_num> <rate>] pa answer [<call_id>] pa hangup [<call_id>] pa list pa switch [<call_id>|none] pa_dtmf <digit string> -------------------------------------------------------------------------------- The source of the portaudio v19 library will also be checked in for the sake of the build system. git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3981 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-01-17 14:10:03 -05:00
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
# End: