forked from Mirrors/freeswitch
79 lines
2.2 KiB
Plaintext
79 lines
2.2 KiB
Plaintext
|
CountryCode: 1
|
||
|
|
AreaCode: 800
|
||
|
|
FAXNumber: +1.800.555.1212
|
||
|
|
LongDistancePrefix: 1
|
||
|
|
InternationalPrefix: 011
|
||
|
|
DialStringRules: etc/dialrules
|
||
|
|
ServerTracing: 0xFFF
|
||
|
|
SessionTracing: 0xFFF
|
||
|
|
RecvFileMode: 0600
|
||
|
|
LogFileMode: 0600
|
||
|
|
DeviceMode: 0600
|
||
|
|
RingsBeforeAnswer: 1
|
||
|
|
SpeakerVolume: off
|
||
|
|
GettyArgs: "-h %l dx_%s"
|
||
|
|
LocalIdentifier: "FS"
|
||
|
|
TagLineFont: etc/lutRS18.pcf
|
||
|
|
TagLineFormat: "From %%l|%c|Page %%P of %%T"
|
||
|
|
MaxRecvPages: 200
|
||
|
|
#
|
||
|
|
#
|
||
|
|
# Modem-related stuff: should reflect modem command interface
|
||
|
|
# and hardware connection/cabling (e.g. flow control).
|
||
|
|
#
|
||
|
|
ModemType: Class1 # use this to supply a hint
|
||
|
|
|
||
|
|
#
|
||
|
|
# Enabling this will use the hfaxd-protocol to set Caller*ID
|
||
|
|
#
|
||
|
|
#ModemSetOriginCmd: AT+VSID="%s","%d"
|
||
|
|
|
||
|
|
#
|
||
|
|
# If "glare" during initialization becomes a problem then take
|
||
|
|
# the modem off-hook during initialization, and then place it
|
||
|
|
# back on-hook when done.
|
||
|
|
#
|
||
|
|
#ModemResetCmds: "ATH1\nAT+VCID=1" # enables CallID display
|
||
|
|
#ModemReadyCmds: ATH0
|
||
|
|
|
||
|
|
Class1AdaptRecvCmd: AT+FAR=1
|
||
|
|
Class1TMConnectDelay: 400 # counteract quick CONNECT response
|
||
|
|
|
||
|
|
#
|
||
|
|
# If you have trouble with V.17 receiving or sending,
|
||
|
|
# you may want to enable one of these, respectively.
|
||
|
|
#
|
||
|
|
#Class1RMQueryCmd: "!24,48,72,96" # enable this to disable V.17 receiving
|
||
|
|
#Class1TMQueryCmd: "!24,48,72,96" # enable this to disable V.17 sending
|
||
|
|
|
||
|
|
#
|
||
|
|
# You'll likely want Caller*ID display (also displays DID) enabled.
|
||
|
|
#
|
||
|
|
ModemResetCmds: AT+VCID=1 # enables CallID display
|
||
|
|
|
||
|
|
#
|
||
|
|
# The pty does not support changing parity.
|
||
|
|
#
|
||
|
|
PagerTTYParity: none
|
||
|
|
|
||
|
|
#
|
||
|
|
# If you are "missing" Caller*ID data on some calls (but not all)
|
||
|
|
# and if you do not have adequate glare protection you may want to
|
||
|
|
# not answer based on RINGs, but rather enable the CallIDAnswerLength
|
||
|
|
# for NDID, disable AT+VCID=1 and do this:
|
||
|
|
#
|
||
|
|
#RingsBeforeAnswer: 0
|
||
|
|
#ModemRingResponse: AT+VRID=1
|
||
|
|
|
||
|
|
# Uncomment DATE and TIME if you really want them, but you probably don't.
|
||
|
|
#CallIDPattern: "DATE="
|
||
|
|
#CallIDPattern: "TIME="
|
||
|
|
CallIDPattern: "NMBR="
|
||
|
|
CallIDPattern: "NAME="
|
||
|
|
CallIDPattern: "ANID="
|
||
|
|
#CallIDPattern: "USER=" # username provided by call
|
||
|
|
#CallIDPattern: "PASS=" # password provided by call
|
||
|
|
#CallIDPattern: "CDID=" # DID context in call
|
||
|
|
CallIDPattern: "NDID="
|
||
|
|
#CallIDAnswerLength: 4
|