freeswitch/configure.in

994 lines
32 KiB
Plaintext
Raw Normal View History

# -*- Autoconf -*-
# Process this file with autoconf to produce a configure script.
# Must change all of the below together
# For a release, set revision for that tagged release as well and uncomment
AC_INIT([freeswitch], [1.0.trunk], BUG-REPORT-ADDRESS)
AC_SUBST(SWITCH_VERSION_MAJOR, [1])
AC_SUBST(SWITCH_VERSION_MINOR, [0])
AC_SUBST(SWITCH_VERSION_MICRO, [trunk])
#AC_SUBST(SWITCH_VERSION_REVISION, [svn-revision-here])
AC_CONFIG_FILES([src/include/switch_version.h.in:src/include/switch_version.h.template])
AC_CONFIG_FILES([.version:.version.in])
AC_CONFIG_AUX_DIR(build/config)
AM_INIT_AUTOMAKE(libfreeswitch,0.1)
AC_CONFIG_SRCDIR([src/switch.c])
AC_CONFIG_HEADER([src/include/switch_private.h])
AC_CONFIG_HEADER([libs/xmlrpc-c/xmlrpc_amconfig.h])
AC_PREFIX_DEFAULT(/usr/local/freeswitch)
# AC_PREFIX_DEFAULT does not get expanded until too late so we need to do this to use prefix in this script
if test "x$prefix" = "xNONE" ; then
prefix='/usr/local/freeswitch'
fi
AC_CANONICAL_HOST
# Absolute source/build directory
switch_srcdir=`(cd $srcdir && pwd)`
switch_builddir=`pwd`
AC_SUBST(switch_srcdir)
AC_SUBST(switch_builddir)
# Where to install the modules
AC_ARG_WITH([modinstdir],
[AS_HELP_STRING([--with-modinstdir=DIR], [Install modules into this location (default: $prefix/mod)])], [modulesdir="$withval"], [modulesdir="${prefix}/mod"])
AC_SUBST(modulesdir)
AC_DEFINE_UNQUOTED([SWITCH_MOD_DIR],"${modulesdir}",[where to install the modules to])
move module make to it's own makefile remove need for modmake.sh (its use is now fully adressed within src/mod/Makefile.am) remove need for generic_mod.mk (it uses the generated build/modmake.rules now instead) add support for building out of tree modules as part of the freeswitch build simply by adding the full path to the module dir to your modules.conf remove the need for special tragets to build. make will now do a make through the core AND all the modules. make install will now install the core and all the modules. most or all of the old targets are still there, plus the new target "core" that will do more or less what make used to do. make should now be able to be done without write permissions to the prefix directory (make install of course will still need them) whith the exception of modules that use buildlib.sh to download and install thier dependencies. This will be fixed in a future revision. checkversion.sh no longer will clean the modules on a change. The need for this should be gone with the correct include paths to have the src directory included first. Some steps in this commit to move us closer to being able to build with non gnu make (gmake). Still some more work to do in this regard as well. buildlib.sh no longer exports CFLAGS, just passes them to the confiure. Move a little closer to supporting install directories in the "automake way" where all the dirs will be acutally determined in configure, and follow the standard install targets in Makefile.am no longer build the modules twice on make install Additional fixes still on the way for proper dependency tracking for the module builds, so they don't build every time. any input on how to reach some of the goals stated above of supporting non gnu make, and more properly handling the install directories is appretiated. Drop me an e-mail if you are intersted in helping. Mike git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@4577 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-03-12 22:26:00 -04:00
# Where to put pidfile
AC_ARG_WITH([rundir],
[AS_HELP_STRING([--with-rundir=DIR], [Put pidfile into this location (default: $prefix/run)])], [runtimedir="$withval"], [runtimedir="${prefix}/run"])
AC_SUBST(runtimedir)
AC_DEFINE_UNQUOTED([SWITCH_RUN_DIR],"${runtimedir}",[where to put pidfile to])
logfiledir="${prefix}/log"
AC_SUBST(logfiledir)
AC_DEFINE_UNQUOTED([SWITCH_LOG_DIR],"${logfiledir}",[where to put log files])
dbdir="${prefix}/db"
AC_SUBST(dbdir)
AC_DEFINE_UNQUOTED([SWITCH_DB_DIR],"${dbdir}",[where to put db files])
htdocsdir="${prefix}/htdocs"
AC_SUBST(htdocsdir)
AC_DEFINE_UNQUOTED([SWITCH_HTDOCS_DIR],"${htdocsdir}",[where to put htdocs files])
soundsdir="${prefix}/sounds"
AC_SUBST(soundsdir)
AC_DEFINE_UNQUOTED([SWITCH_SOUNDS_DIR],"${soundsdir}",[where to put sounds files])
grammardir="${prefix}/grammar"
AC_SUBST(grammardir)
AC_DEFINE_UNQUOTED([SWITCH_GRAMMAR_DIR],"${grammardir}",[where to put grammar files])
scriptdir="${prefix}/scripts"
AC_SUBST(scriptdir)
AC_DEFINE_UNQUOTED([SWITCH_SCRIPT_DIR],"${scriptdir}",[where to put script files])
recordingsdir="${prefix}/recordings"
AC_SUBST(recordingsdir)
AC_DEFINE_UNQUOTED([SWITCH_RECORDINGS_DIR],"${recordingsdir}",[where to put recording files])
if test "$sysconfdir" = "\${prefix}/etc" ; then
confdir="$prefix/conf"
else
confdir="$sysconfdir"
fi
sysconfdir="$confdir"
AC_SUBST(confdir)
AC_DEFINE_UNQUOTED([SWITCH_CONF_DIR],"${confdir}",[directory for configuration files])
AC_SUBST(libdir)
AC_SUBST(bindir)
AC_SUBST(includedir)
#Set default language
AC_LANG_C
# Checks for programs.
AC_PROG_CC
AC_PROG_CXX
#check if the g++ compiler works
AC_CACHE_CHECK([whether the C++ compiler works], [ac_cv_sys_cxx_works], [
AC_LANG_PUSH([C++])
AC_COMPILE_IFELSE([int main() { }], [ac_cv_sys_cxx_works=yes],
[ac_cv_sys_cxx_works=no])
AC_LANG_POP([C++])
])
[ if [ "x$ac_cv_sys_cxx_works" = "xno" ]; then ]
AC_MSG_FAILURE([The C++ compiler does not work. Please (re)install the C++ compiler])
[ fi ]
AC_PROG_AWK
AC_PROG_MAKE_SET
AC_PROG_INSTALL
#override some default libtool behavior and invoke AC_PROG_LIBTOOL (see http://lists.gnu.org/archive/html/libtool/2007-03/msg00000.html)
m4_defun([_LT_AC_LANG_F77_CONFIG], [:])
m4_defun([_LT_AC_LANG_GCJ_CONFIG], [:])
m4_defun([_LT_AC_LANG_RC_CONFIG], [:])
AM_PROG_CC_C_O
AC_PROG_LIBTOOL
#Check for compiler vendor
AX_COMPILER_VENDOR
# Optimize
AC_ARG_ENABLE(optimization,
[AC_HELP_STRING([--enable-optimization],[Set if you want us to add max optimising compiler flags])],[enable_optimizer="$enableval"],[enable_optimizer="no"])
if test "${enable_optimizer}" = "yes" ; then
AC_DEFINE([OPTIMZER],[],[Enable Optimization.])
AX_CC_MAXOPT
fi
# set defaults for use on all platforms
SWITCH_AM_CFLAGS="-I${switch_srcdir}/src/include -I${switch_builddir}/src/include -I${switch_srcdir}/libs/libteletone/src"
SWITCH_AM_CXXFLAGS="-I${switch_srcdir}/src/include -I${switch_builddir}/src/include -I${switch_srcdir}/libs/libteletone/src"
SWITCH_AM_LDFLAGS="-lm"
#set SOLINK variable based on compiler and host
if test "x${ax_cv_c_compiler_vendor}" = "xsun" ; then
SOLINK="-Bdynamic -dy -G"
elif test "x${ax_cv_c_compiler_vendor}" = "xgnu" ; then
case "$host" in
*darwin10.*)
SOLINK="-dynamic -force-flat-namespace"
;;
*darwin*)
SOLINK="-dynamic -bundle -force-flat-namespace"
;;
*-solaris2*)
SOLINK="-shared -Xlinker"
;;
*)
SOLINK="-shared -Xlinker -x"
;;
esac
else
AC_ERROR([Please update configure.in with SOLINK values for your compiler])
fi
# set DYNAMIC_LIB_EXTEN
# we should really be using libtool so we don't need to do this
case "$host" in
*cygwin* | *mingw*)
DYNAMIC_LIB_EXTEN="dll"
;;
*)
DYNAMIC_LIB_EXTEN="so"
;;
esac
##
# detect libtool major version,
# set libtool library extension based on this
# to work around some brokeness when using 'la' with libtool-1.5
#
AC_MSG_CHECKING([libtool major version])
libtool="${switch_builddir}/libtool"
LIBTOOL_MAJOR_VERSION="`$libtool --version 2>/dev/null| sed -e 's/([[^)]]*)//g;s/^[[^0-9]]*//;s/[[- ]].*//g;q'| awk 'BEGIN { FS = "." } { print $1 }' `"
if test -z "$LIBTOOL_MAJOR_VERSION" ; then
LIBTOOL_MAJOR_VERSION="`sed -n -e '/^VERSION/{s/^.*=\"\{0,1\}\([[0-9]]\{1,\}\)\..*/\1/;p;}' ${switch_srcdir}/build/config/ltmain.sh`"
fi
if test -z "$LIBTOOL_MAJOR_VERSION" ; then
AC_MSG_ERROR([Failed to detect your libtool version, please open a bug report on http://jira.freeswitch.org/])
fi
AC_MSG_RESULT([${LIBTOOL_MAJOR_VERSION}])
LIBTOOL_LIB_EXTEN="$DYNAMIC_LIB_EXTEN"
if test "${LIBTOOL_MAJOR_VERSION}" = "2" ; then
LIBTOOL_LIB_EXTEN="la"
fi
AC_MSG_RESULT([using libtool library extension... ${LIBTOOL_LIB_EXTEN}])
# Enable 64 bit build
AC_ARG_ENABLE(64,
[AC_HELP_STRING([--enable-64],[build with 64 bit support])],[enable_64="$enable_64"],[enable_64="no"])
# tweak compiler specific flags
if test "x${ax_cv_c_compiler_vendor}" = "xsun" ; then
APR_ADDTO(SWITCH_AM_CFLAGS, -KPIC)
APR_ADDTO(SWITCH_AM_CFLAGS, -DPIC)
APR_ADDTO(SWITCH_AM_CFLAGS, -erroff=E_END_OF_LOOP_CODE_NOT_REACHED)
APR_ADDTO(SWITCH_AM_CFLAGS, -errtags=yes)
APR_ADDTO(SWITCH_AM_CXXFLAGS, -errtags=yes)
APR_ADDTO(SWITCH_AM_CXXFLAGS, -KPIC)
APR_ADDTO(SWITCH_AM_CXXFLAGS, -DPIC)
APR_ADDTO(SWITCH_AM_CXXFLAGS, "-features=extensions")
APR_ADDTO(SWITCH_AM_LDFLAGS, -R${prefix}/lib)
if test "${enable_64}" = "yes"; then
APR_ADDTO(SWITCH_AM_CFLAGS, -m64)
APR_ADDTO(SWITCH_AM_CXXFLAGS, -m64)
APR_ADDTO(SWITCH_AM_LDFLAGS, -m64)
LIBS="$LIBS -m64"
fi
elif test "x${ax_cv_c_compiler_vendor}" = "xgnu" ; then
APR_ADDTO(SWITCH_AM_CFLAGS, -fPIC)
APR_ADDTO(SWITCH_AM_CXXFLAGS, -fPIC)
APR_ADDTO(SWITCH_AM_CFLAGS, -Werror)
if test "${enable_64}" = "yes"; then
case "$host" in
*darwin10.*|*darwin9.*|*darwin8.*)
APR_ADDTO(CFLAGS, -arch x86_64)
APR_ADDTO(LDFLAGS, -arch x86_64)
APR_ADDTO(CXXFLAGS, -arch x86_64)
;;
*)
LIBS="$LIBS -m64"
;;
esac
fi
fi
#
# gcc visibility cflag checks
#
AC_ARG_ENABLE([visibility],
[AS_HELP_STRING([--disable-visibility], [Disable or enable API visibility support (default: use if available)])],
[enable_visibility="${enableval}"],
[enable_visibility="detect"]
)
HAVE_VISIBILITY="no"
if test "x${enable_visibility}" != "xno" ; then
case "${ax_cv_c_compiler_vendor}" in
gnu)
save_CFLAGS="${CFLAGS}"
CFLAGS="${CFLAGS} -fvisibility=hidden"
AC_MSG_CHECKING([whether the compiler supports -fvisibility=hidden])
AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM(
[int foo __attribute__ ((visibility("default")));],
[;]
)],
[AC_MSG_RESULT([yes])
APR_ADDTO([SWITCH_AM_CFLAGS], [-fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1])
APR_ADDTO([SWITCH_AM_CXXFLAGS], [-fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1])
HAVE_VISIBILITY="yes"],
[AC_MSG_RESULT([no])]
)
CFLAGS="${save_CFLAGS}"
;;
sun)
# save_CFLAGS="${CFLAGS}"
# CFLAGS="${CFLAGS} -xldscope=hidden"
# AC_MSG_CHECKING([whether the compiler supports -xldscope=hidden])
# AC_COMPILE_IFELSE(
# [AC_LANG_PROGRAM(
# [int foo __attribute__ ((visibility("default")));],
# [;]
# )],
#
# [AC_MSG_RESULT([yes])
# APR_ADDTO([SWITCH_AM_CFLAGS], [-xldscope=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1])
# APR_ADDTO([SWITCH_AM_CXXFLAGS], [-xldscope=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1])
# HAVE_VISIBILITY="yes"],
#
# [AC_MSG_RESULT([no])]
# )
# CFLAGS="${save_CFLAGS}"
;;
*)
if test "x${enable_visibility}" = "xyes" ; then
AC_MSG_ERROR([Non-GNU / SUN compilers are currently unsupported])
else
AC_MSG_WARN([Non-GNU / SUN compilers are currently unsupported])
fi
;;
esac
#
# visibility explicitly requested but not supported by this compiler => error
#
if test "x${enable_visibility}" = "xyes" -a "x${HAVE_VISIBILITY}" = "xno" ; then
AC_MSG_ERROR([API visibility not supported by this compiler])
fi
fi
# Enable debugging (default: on)
# (rename option if the default is changed)
AC_ARG_ENABLE(debug,
[AC_HELP_STRING([--disable-debug],[build without debug information])],[enable_debug="$enableval"],[enable_debug="yes"])
if test "${enable_debug}" = "yes"; then
AC_DEFINE([DEBUG],[],[Enable extra debugging.])
saved_CFLAGS="$CFLAGS"
CFLAGS=
AX_CFLAGS_WARN_ALL_ANSI
SWITCH_ANSI_CFLAGS=$CFLAGS
CFLAGS="$saved_CFLAGS"
if test "x${ax_cv_c_compiler_vendor}" = "xgnu" ; then
APR_ADDTO(SWITCH_AM_CFLAGS, -g -ggdb)
export DEBUG_CFLAGS="-g -ggdb"
fi
fi
AC_ARG_ENABLE(cpp,
[AC_HELP_STRING([--disable-cpp],[build without cpp code])],[enable_cpp="$enableval"],[enable_cpp="yes"])
AM_CONDITIONAL([ENABLE_CPP],[test "${enable_cpp}" = "yes"])
AC_ARG_ENABLE(zrtp,
[AS_HELP_STRING([--enable-zrtp], [Compile with zrtp Support])],,[enable_zrtp="no"])
if test "x$enable_zrtp" = "xyes" ; then
saved_LIBS="$LIBS"
LIBS="$saved_LIBS -L/usr/local/lib -lbn -lpthread"
AC_CHECK_LIB(zrtp, zrtp_init, [has_zrtp="yes"], [has_zrtp="no"])
LIBS="$saved_LIBS"
if test "x$has_zrtp" = "xno"; then
AC_ERROR([Cannot locate zrtp libraries])
fi
APR_ADDTO(SWITCH_AM_CFLAGS, -DENABLE_ZRTP)
fi
PA_LIBS=
PKG_CHECK_MODULES(JACK, jack, have_jack=yes, have_jack=no)
if test "x$have_jack" = "xyes" ; then
PA_LIBS+=$JACK_LIBS
fi
AC_CHECK_LIB(asound, snd_pcm_open, have_alsa=yes, have_alsa=no)
if test "x$have_alsa" = "xyes" ; then
PA_LIBS+=-lasound
fi
AC_SUBST(PA_LIBS)
AM_CONDITIONAL([ENABLE_ZRTP],[test "x$enable_zrtp" != "xno"])
AM_CONDITIONAL([WANT_DEBUG],[test "${enable_debug}" = "yes"])
AC_ARG_ENABLE(core-odbc-support,
[AS_HELP_STRING([--enable-core-odbc-support], [Compile with ODBC Support])],,[enable_core_odbc_support="no"])
AX_LIB_ODBC
if test "$ac_cv_found_odbc" = "yes" ; then
enable_core_odbc_support="yes"
fi
ESL_LDFLAGS=
PLATFORM_CORE_DEPLIBS=
# tweak platform specific flags
case "$host" in
*darwin10.*)
APR_ADDTO(SWITCH_AM_CFLAGS, -DMACOSX)
APR_ADDTO(CFLAGS, -pipe -no-cpp-precomp)
APR_ADDTO(LDFLAGS, -pipe -bind_at_load)
APR_ADDTO(CXXFLAGS, -pipe)
APR_REMOVEFROM(SWITCH_AM_CFLAGS, -fPIC)
if test "x$enable_core_odbc_support" != "xno"; then
APR_ADDTO(PLATFORM_CORE_DEPLIBS, --framework CoreFoundation)
fi
;;
*darwin*)
APR_ADDTO(SWITCH_AM_CFLAGS, -DMACOSX)
APR_REMOVEFROM(SWITCH_AM_CFLAGS, -fPIC)
if test "x$enable_core_odbc_support" != "xno"; then
APR_ADDTO(PLATFORM_CORE_DEPLIBS, --framework CoreFoundation)
fi
;;
*-solaris2*)
APR_ADDTO(SWITCH_AM_CFLAGS, -DPATH_MAX=2048)
APR_ADDTO(SWITCH_AM_LDFLAGS, -lsendfile -lresolv -lsocket -lnsl -luuid)
APR_ADDTO(ESL_LDFLAGS, -lnsl -lsocket)
;;
*bsd*)
APR_ADDTO(SWITCH_AM_CFLAGS, -I/usr/local/include)
;;
esac
APR_REMOVEFROM(SWITCH_AM_CXXFLAGS, -std=c99)
AC_SUBST(SWITCH_AM_CFLAGS)
AC_SUBST(SWITCH_ANSI_CFLAGS)
AC_SUBST(SWITCH_AM_CXXFLAGS)
AC_SUBST(SWITCH_AM_LDFLAGS)
AC_SUBST(ESL_LDFLAGS)
AC_SUBST(PLATFORM_CORE_DEPLIBS)
AC_SUBST(SOLINK)
AC_SUBST(DYNAMIC_LIB_EXTEN)
AC_SUBST(LIBTOOL_LIB_EXTEN)
# Checks for header files.
AC_HEADER_DIRENT
AC_HEADER_STDC
AC_CHECK_HEADERS([sys/types.h sys/resource.h sched.h wchar.h sys/filio.h sys/ioctl.h netdb.h execinfo.h])
# for xmlrpc-c config.h
if test x"$ac_cv_header_wchar_h" = xyes; then
HAVE_WCHAR_H_DEFINE=1
else
HAVE_WCHAR_H_DEFINE=0
fi
AC_SUBST(HAVE_WCHAR_H_DEFINE)
# Checks for typedefs, structures, and compiler characteristics.
AC_C_CONST
AC_C_INLINE
AC_TYPE_SIZE_T
AC_HEADER_TIME
AC_STRUCT_TM
# Checks for library functions.
AC_PROG_GCC_TRADITIONAL
AC_FUNC_MALLOC
AC_TYPE_SIGNAL
AC_FUNC_STRFTIME
AC_CHECK_FUNCS([gethostname vasprintf mmap mlock mlockall usleep getifaddrs])
AC_CHECK_FUNCS([sched_setscheduler setpriority setrlimit setgroups initgroups])
AC_CHECK_FUNCS([wcsncmp setgroups asprintf setenv pselect gettimeofday localtime_r gmtime_r strcasecmp stricmp _stricmp])
AX_HAVE_CPU_SET
AC_CHECK_LIB(rt, clock_gettime, [AC_DEFINE(HAVE_CLOCK_GETTIME, 1, [Define if you have clock_gettime()])])
AC_CHECK_LIB(rt, clock_getres, [AC_DEFINE(HAVE_CLOCK_GETRES, 1, [Define if you have clock_getres()])])
AC_CHECK_LIB(rt, clock_nanosleep, [AC_DEFINE(HAVE_CLOCK_NANOSLEEP, 1, [Define if you have clock_nanosleep()])])
AC_CHECK_FUNC(socket, , AC_CHECK_LIB(socket, socket))
AC_CHECK_MEMBERS([struct tm.tm_gmtoff],,,[
#include <sys/types.h>
#include <time.h>])
AC_CHECK_MEMBERS([struct tm.tm_zone],,,[
#include <sys/types.h>
#include <time.h>])
AC_CHECK_DECL([RLIMIT_MEMLOCK],
[AC_DEFINE([HAVE_RLIMIT_MEMLOCK],[1],[RLIMIT_MEMLOCK constant for setrlimit])],,
[#ifdef HAVE_SYS_RESOURCE_H
#include <sys/resource.h>
#endif])
AC_CHECK_DECL([SCHED_RR],
[AC_DEFINE([HAVE_SCHED_RR],[1],[SCHED_RR constant for sched_setscheduler])],,
[#ifdef HAVE_SCHED_H
#include <sched.h>
#endif])
#
# use mlockall only on linux (for now; if available)
#
if test "x${ac_cv_func_mlockall}" = "xyes"; then
AC_MSG_CHECKING([whether to use mlockall])
case "$host" in
*-linux-*)
AC_DEFINE([USE_MLOCKALL],[1],[Enable mlockall support])
AC_MSG_RESULT([yes])
USE_MLOCKALL=yes
;;
*-freebsd*)
AC_MSG_RESULT([no, broken for non-root users])
;;
*)
AC_MSG_RESULT([no])
;;
esac
#
# setrlimit prerequisites
#
if test "x${USE_MLOCKALL}" = "xyes" -a \
"x${ac_cv_func_setrlimit}" = "xyes" -a \
"x${ac_cv_have_decl_RLIMIT_MEMLOCK}" = "xyes"
then
AC_DEFINE([USE_SETRLIMIT],[1],[Use setrlimit to disable mlock limit for non-root users])
fi
fi
#
# sched_setcheduler + round-robin scheduler prerequisites
#
if test "x${ac_cv_func_sched_setscheduler}" = "xyes" -a \
"x${ac_cv_have_decl_SCHED_RR}" = "xyes"
then
AC_DEFINE([USE_SCHED_SETSCHEDULER],[1],[Enable round-robin scheduler using sched_setscheduler])
fi
#
# xmlrpc-c checks
#
HAVE_LIBWWW_SSL_DEFINE=0
AC_SUBST(HAVE_LIBWWW_SSL_DEFINE)
DIRECTORY_SEPARATOR="/"
AC_SUBST(DIRECTORY_SEPARATOR)
va_list_is_array=no
AC_MSG_CHECKING(whether va_list is an array)
AC_TRY_COMPILE([
#include <stdarg.h>
], [va_list list1, list2; list1 = list2;], ,
va_list_is_array=yes)
AC_MSG_RESULT($va_list_is_array)
if test x"$va_list_is_array" = xyes; then
VA_LIST_IS_ARRAY_DEFINE=1
else
VA_LIST_IS_ARRAY_DEFINE=0
fi
AC_SUBST(VA_LIST_IS_ARRAY_DEFINE)
AC_MSG_CHECKING(whether compiler has __attribute__)
AC_TRY_COMPILE(, [int x __attribute__((__unused__));],
compiler_has_attribute=yes,
compiler_has_attribute=no)
AC_MSG_RESULT($compiler_has_attribute)
if test x"$compiler_has_attribute" = xyes; then
ATTR_UNUSED="__attribute__((__unused__))"
else
ATTR_UNUSED=
fi
AC_SUBST(ATTR_UNUSED)
saved_CFLAGS="$CFLAGS"
AC_CACHE_CHECK([whether compiler supports -Wdeclaration-after-statement], [ac_cv_gcc_declaration_after_statement], [
CFLAGS="$CFLAGS -Wdeclaration-after-statement"
AC_TRY_COMPILE([],[return 0;],[ac_cv_gcc_declaration_after_statement=yes],[ac_cv_gcc_declaration_after_statement=no])
])
AC_MSG_RESULT($ac_cv_gcc_declaration_after_statement)
if test x"$ac_cv_gcc_declaration_after_statement" = xyes; then
APR_ADDTO(SWITCH_ANSI_CFLAGS, -Wdeclaration-after-statement)
fi
CFLAGS="$saved_CFLAGS"
AC_C_BIGENDIAN(AC_DEFINE([SWITCH_BYTE_ORDER],__BIG_ENDIAN,[Big Endian]),AC_DEFINE([SWITCH_BYTE_ORDER],__LITTLE_ENDIAN,[Little Endian]))
# Checks for integer size
AC_CHECK_SIZEOF(char, 1)
AC_CHECK_SIZEOF(int, 4)
AC_CHECK_SIZEOF(long, 4)
AC_CHECK_SIZEOF(short, 2)
AC_CHECK_SIZEOF(long long, 8)
AC_TYPE_SIZE_T
AC_CHECK_TYPE(ssize_t, int)
# Checks for pointer size
AC_CHECK_SIZEOF(void*, 4)
if test "x$ac_cv_sizeof_voidp" != "x"; then
voidp_size=$ac_cv_sizeof_voidp
else
AC_ERROR([Cannot determine size of void*])
fi
if test "$ac_cv_sizeof_short" = "2"; then
short_value=short
fi
if test "$ac_cv_sizeof_int" = "4"; then
int_value=int
fi
if test "$ac_cv_sizeof_int" = "8"; then
int64_t_fmt='#define SWITCH_INT64_T_FMT "d"'
uint64_t_fmt='#define SWITCH_UINT64_T_FMT "u"'
int64_value="int"
long_value=int
elif test "$ac_cv_sizeof_long" = "8"; then
int64_t_fmt='#define SWITCH_INT64_T_FMT "ld"'
uint64_t_fmt='#define SWITCH_UINT64_T_FMT "lu"'
int64_value="long"
long_value=long
case "$host" in
*-solaris2*|*apple-darwin*|*-openbsd*)
if test "$ac_cv_sizeof_long_long" = "8"; then
int64_t_fmt='#define SWITCH_INT64_T_FMT "lld"'
uint64_t_fmt='#define SWITCH_UINT64_T_FMT "llu"'
int64_value="long long"
long_value="long long"
fi
;;
esac
elif test "$ac_cv_sizeof_long_long" = "8"; then
int64_t_fmt='#define SWITCH_INT64_T_FMT "lld"'
uint64_t_fmt='#define SWITCH_UINT64_T_FMT "llu"'
int64_value="long long"
long_value="long long"
elif test "$ac_cv_sizeof_longlong" = "8"; then
int64_t_fmt='#define SWITCH_INT64_T_FMT "qd"'
uint64_t_fmt='#define SWITCH_UINT64_T_FMT "qu"'
int64_value="__int64"
long_value="__int64"
else
AC_ERROR([could not detect a 64-bit integer type])
fi
if test "$ac_cv_type_size_t" = "yes"; then
size_t_value="size_t"
else
size_t_value="switch_int32_t"
fi
if test "$ac_cv_type_ssize_t" = "yes"; then
ssize_t_value="ssize_t"
else
ssize_t_value="switch_int32_t"
fi
APR_CHECK_SIZEOF_EXTENDED([#include <sys/types.h>], ssize_t, 8)
if test "$ac_cv_sizeof_ssize_t" = "$ac_cv_sizeof_int"; then
ssize_t_fmt='#define SWITCH_SSIZE_T_FMT "d"'
elif test "$ac_cv_sizeof_ssize_t" = "$ac_cv_sizeof_long"; then
ssize_t_fmt='#define SWITCH_SSIZE_T_FMT "ld"'
else
ssize_t_fmt='#error Can not determine the proper size for ssize_t'
fi
APR_CHECK_SIZEOF_EXTENDED([#include <stddef.h>], size_t, 8)
if test "$ac_cv_sizeof_size_t" = "$ac_cv_sizeof_int"; then
size_t_fmt='#define SWITCH_SIZE_T_FMT "d"'
elif test "$ac_cv_sizeof_size_t" = "$ac_cv_sizeof_long"; then
size_t_fmt='#define SWITCH_SIZE_T_FMT "ld"'
else
size_t_fmt='#error Can not determine the proper size for size_t'
fi
# Basically, we have tried to figure out the correct format strings
# for SWITCH types which vary between platforms, but we don't always get
# it right. If you find that we don't get it right for your platform,
# you can override our decision below.
# NOTE: borrowed much of this logic from apr.
case $host in
s390*linux*)
# uniquely, the 31-bit Linux/s390 uses "unsigned long int"
# for size_t rather than "unsigned int":
size_t_fmt='#define SWITCH_SIZE_T_FMT "lu"'
ssize_t_fmt='#define SWITCH_SSIZE_T_FMT "ld"'
;;
*-os2*)
size_t_fmt='#define SWITCH_SIZE_T_FMT "lu"'
;;
*-openbsd*)
size_t_fmt='#define SWITCH_SIZE_T_FMT "ld"'
;;
*aix4*|*aix5*)
ssize_t_fmt='#define SWITCH_SSIZE_T_FMT "ld"'
size_t_fmt='#define SWITCH_SIZE_T_FMT "ld"'
;;
*beos*)
ssize_t_fmt='#define SWITCH_SSIZE_T_FMT "ld"'
size_t_fmt='#define SWITCH_SIZE_T_FMT "ld"'
;;
*apple-darwin*)
osver=`uname -r`
case $osver in
[0-7].*)
ssize_t_fmt='#define SWITCH_SSIZE_T_FMT "d"'
;;
*)
ssize_t_fmt='#define SWITCH_SSIZE_T_FMT "ld"'
;;
esac
size_t_fmt='#define SWITCH_SIZE_T_FMT "lu"'
;;
esac
AC_SUBST(voidp_size)
AC_SUBST(short_value)
AC_SUBST(int_value)
AC_SUBST(long_value)
AC_SUBST(int64_value)
AC_SUBST(size_t_value)
AC_SUBST(ssize_t_value)
AC_SUBST(int64_t_fmt)
AC_SUBST(uint64_t_fmt)
AC_SUBST(ssize_t_fmt)
AC_SUBST(size_t_fmt)
case $host in
*-openbsd*)
# OpenBSD's gunzip and friends don't like -d because its redundant, only gzip does
AC_PATH_PROGS(ZCAT, gzip)
;;
*)
AC_PATH_PROGS(ZCAT, gunzip gzcat gzip zcat)
;;
esac
AC_PATH_PROGS(TAR, gtar tar)
AC_PATH_PROGS(WGET, wget)
AC_PATH_PROGS(CURL, curl)
GETLIB="cd $switch_srcdir/libs && ${SHELL} $switch_builddir/build/getlib.sh"
AC_SUBST(GETLIB)
GETSOUNDS="${SHELL} $switch_builddir/build/getsounds.sh"
AC_SUBST(GETSOUNDS)
LIBCURL_CHECK_CONFIG([yes], [7.13.0], [LIBCURL_DEPS=''], [LIBCURL_DEPS='${switch_builddir}/libs/curl/lib/libcurl.la';LIBCURL='${switch_builddir}/libs/curl/lib/libcurl.la';LIBCURL_CPPFLAGS='-I${switch_srcdir}/libs/curl/include'])
AC_SUBST(LIBCURL_DEPS)
AC_ARG_ENABLE(core-libedit-support,
[AS_HELP_STRING([--disable-core-libedit-support], [Compile without libedit Support])], [enable_core_libedit_support="$enableval"], [enable_core_libedit_support="yes"])
if test "$enable_core_libedit_support" = "yes" ; then
AC_CHECK_LIB(ncurses, tgetent,,
[AC_CHECK_LIB(curses, tgetent,,
[AC_MSG_ERROR([libtermcap, libcurses or libncurses are required!])] )] )
fi
SAC_OPENSSL
if test x$HAVE_OPENSSL = x1; then
openssl_CFLAGS="$openssl_CFLAGS -DHAVE_OPENSSL";
fi
AX_CHECK_JAVA
AM_CONDITIONAL([HAVE_ODBC],[test "x$enable_core_odbc_support" != "xno"])
AM_CONDITIONAL([HAVE_LIBEDIT],[test "x$enable_core_libedit_support" != "xno"])
AM_CONDITIONAL([HAVE_MYSQL],[test "$found_mysql" = "yes"])
#
# Python checks for mod_python
#
AC_ARG_WITH(
[python],
[AS_HELP_STRING([--with-python], [Use system provided version of python (default: try)])],
[with_python="$withval"],
[with_python="try"]
)
if test "$with_python" != "no"
then
save_CFLAGS="$CFLAGS"
save_LIBS="$LIBS"
if test "$with_python" != "yes" -a "$with_python" != "try" ; then
AC_MSG_CHECKING([for python])
if test ! -x "$with_python" ; then
AC_MSG_ERROR([Specified python does not exist or is not executable: $with_python])
fi
AC_MSG_RESULT([$with_python])
AC_SUBST([PYTHON], ["$with_python"])
else
AC_PATH_PROG([PYTHON], ["python"], ["no"], ["$PATH:/usr/bin:/usr/local/bin"])
fi
if test "$PYTHON" != "no" ; then
AC_MSG_CHECKING([python version])
PYTHON_VER="`$PYTHON -V 2>&1 | cut -d' ' -f2`"
if test -z "$PYTHON_VER" ; then
AC_MSG_ERROR([Unable to detect python version])
fi
AC_MSG_RESULT([$PYTHON_VER])
AC_MSG_CHECKING([for python distutils])
python_result="`$PYTHON -c 'import distutils;' 2>&1`"
if test -z "$python_result" ; then
python_has_distutils="yes"
else
python_has_distutils="no"
fi
AC_MSG_RESULT([$python_has_distutils])
if test "$python_has_distutils" != "no" ; then
AC_MSG_CHECKING([location of site-packages])
PYTHON_SITE_DIR="`$PYTHON -c 'from distutils import sysconfig; print sysconfig.get_python_lib(0);'`"
if test -z "$PYTHON_SITE_DIR" ; then
AC_MSG_ERROR([Unable to detect python site-packages path])
elif test ! -d "$PYTHON_SITE_DIR" ; then
AC_MSG_ERROR([Path $PYTHON_SITE_DIR returned by python does not exist!])
fi
AC_MSG_RESULT([$PYTHON_SITE_DIR])
AC_SUBST([PYTHON_SITE_DIR], [$PYTHON_SITE_DIR])
#
# python distutils found, get settings from python directly
#
PYTHON_CFLAGS="`$PYTHON -c 'from distutils import sysconfig; flags = [[\"-I\" + sysconfig.get_python_inc(0), \"-I\" + sysconfig.get_python_inc(1), \" \".join(sysconfig.get_config_var(\"CFLAGS\").split())]]; print \" \".join(flags);'`"
PYTHON_LDFLAGS="`$PYTHON -c 'from distutils import sysconfig; libs = sysconfig.get_config_var(\"LIBS\").split() + sysconfig.get_config_var(\"SYSLIBS\").split(); libs.append(\"-lpython\"+sysconfig.get_config_var(\"VERSION\")); print \" \".join(libs);'`"
PYTHON_LIB="`$PYTHON -c 'from distutils import sysconfig; print \"python\" + sysconfig.get_config_var(\"VERSION\");'`"
PYTHON_LIBDIR="`$PYTHON -c 'from distutils import sysconfig; print sysconfig.get_config_var(\"LIBDIR\");'`"
# handle python being installed into /usr/local
AC_MSG_CHECKING([python libdir])
if test -z "`echo $PYTHON_LIBDIR | grep "/usr/lib"`" ; then
PYTHON_LDFLAGS="-L$PYTHON_LIBDIR $PYTHON_LDFLAGS"
LIBS="-L$PYTHON_LIBDIR $LIBS"
fi
AC_MSG_RESULT([$PYTHON_LIBDIR])
# check libpython
AC_CHECK_LIB([$PYTHON_LIB], [main], [has_libpython="yes"], [has_libpython="no"])
if test "$has_libpython" = "no" ; then
AS_IF([test "$with_python" = "try"],
[AC_MSG_WARN([$PYTHON_LIB is unusable])],
[AC_MSG_ERROR([$PYTHON_LIB is unusable])]
)
fi
# check whether system libpython is usable and has threads support
CFLAGS="$PYTHON_CFLAGS"
LIBS="$PYTHON_LDFLAGS"
AC_CHECK_FUNC([PyThread_init_thread], [python_has_threads="yes"], [python_has_threads="no"])
if test "$python_has_threads" = "no"; then
AS_IF([test "$with_python" = "try"],
[AC_MSG_WARN([Your python lacks threads support, can not build mod_python])],
[AC_MSG_ERROR([Your python lacks threads support, can not build mod_python])]
)
else
AC_MSG_NOTICE([Your python seems OK, do not forget to enable mod_python in modules.conf])
AC_SUBST([PYTHON_CFLAGS], [$PYTHON_CFLAGS])
AC_SUBST([PYTHON_LDFLAGS], [$PYTHON_LDFLAGS])
fi
else
AS_IF([test "$with_python" = "try"],
[AC_MSG_WARN([Could not find or use python distutils module: $python_result])],
[AC_MSG_ERROR([Could not find or use python distutils module: $python_result])]
)
fi
LIBS="$save_LIBS"
CFLAGS="$save_CFLAGS"
unset python_has_threads
unset python_has_distutils
unset python_result
else
AS_IF([test "$with_python" = "try"],
[AC_MSG_WARN([Could not find python, mod_python will not build, use --with-python to specify the location])],
[AC_MSG_ERROR([Could not find python, use --with-python to specify the location])]
)
fi
else
AC_MSG_WARN([python support disabled, building mod_python will fail!])
fi
CHECK_ERLANG
AC_CONFIG_FILES([Makefile
build/Makefile
src/Makefile
move module make to it's own makefile remove need for modmake.sh (its use is now fully adressed within src/mod/Makefile.am) remove need for generic_mod.mk (it uses the generated build/modmake.rules now instead) add support for building out of tree modules as part of the freeswitch build simply by adding the full path to the module dir to your modules.conf remove the need for special tragets to build. make will now do a make through the core AND all the modules. make install will now install the core and all the modules. most or all of the old targets are still there, plus the new target "core" that will do more or less what make used to do. make should now be able to be done without write permissions to the prefix directory (make install of course will still need them) whith the exception of modules that use buildlib.sh to download and install thier dependencies. This will be fixed in a future revision. checkversion.sh no longer will clean the modules on a change. The need for this should be gone with the correct include paths to have the src directory included first. Some steps in this commit to move us closer to being able to build with non gnu make (gmake). Still some more work to do in this regard as well. buildlib.sh no longer exports CFLAGS, just passes them to the confiure. Move a little closer to supporting install directories in the "automake way" where all the dirs will be acutally determined in configure, and follow the standard install targets in Makefile.am no longer build the modules twice on make install Additional fixes still on the way for proper dependency tracking for the module builds, so they don't build every time. any input on how to reach some of the goals stated above of supporting non gnu make, and more properly handling the install directories is appretiated. Drop me an e-mail if you are intersted in helping. Mike git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@4577 d0543943-73ff-0310-b7d9-9358b9ac24b2
2007-03-12 22:26:00 -04:00
src/mod/Makefile
src/mod/applications/mod_enum/Makefile
src/mod/applications/mod_expr/Makefile
src/mod/applications/mod_stress/Makefile
src/mod/applications/mod_t38gateway/Makefile
src/mod/endpoints/mod_portaudio/Makefile
src/mod/endpoints/mod_skinny/Makefile
src/mod/endpoints/mod_skypopen/Makefile
src/mod/endpoints/mod_sofia/Makefile
src/mod/formats/mod_portaudio_stream/Makefile
src/mod/asr_tts/mod_unimrcp/Makefile
src/mod/languages/mod_java/Makefile
src/mod/languages/mod_lua/Makefile
src/mod/languages/mod_python/Makefile
src/mod/languages/mod_spidermonkey/Makefile
src/mod/event_handlers/mod_erlang_event/Makefile
src/include/switch_am_config.h
build/getsounds.sh
build/getlib.sh
build/freeswitch.pc
build/modmake.rules
libs/xmlrpc-c/include/xmlrpc-c/config.h
libs/xmlrpc-c/xmlrpc_config.h
scripts/gentls_cert])
AM_CONDITIONAL(ISLINUX, [test `uname -s` = Linux])
AM_CONDITIONAL(ISMAC, [test `uname -s` = Darwin])
AM_CONDITIONAL(IS64BITLINUX, [test `uname -m` = x86_64])
#some vars to sub into the Makefile.am's
#LIBS+=> core.log || error="yes";if test -n "$(VERBOSE)" -o "$$error" = "yes";then cat core.log;fi;if test "$$error" = "yes";then exit 1;fi
LIBTOOL='`if test -z "$(VERBOSE)" ; then echo $(SHELL) $(switch_builddir)/quiet_libtool ;else echo $(switch_builddir)/libtool; fi;`'
TOUCH_TARGET='if test -f "$@";then touch "$@";fi;'
CONF_MODULES='$$(grep -v "\#" $(switch_builddir)/modules.conf | sed -e "s|^.*/||" | sort | uniq )'
CONF_DISABLED_MODULES='$$(grep "\#" $(switch_builddir)/modules.conf | grep -v "\#\#" | sed -e "s|^.*/||" | sort | uniq )'
OUR_MODS='$$(if test -z "$(MODULES)" ; then tmp_mods="$(CONF_MODULES)"; else tmp_mods="$(MODULES)" ; fi ; mods="$$(for i in $$tmp_mods ; do echo $$i-all ; done )"; echo $$mods )'
OUR_CLEAN_MODS='$$(if test -z "$(MODULES)" ; then tmp_mods="$(CONF_MODULES)"; else tmp_mods="$(MODULES)" ; fi ; mods="$$(for i in $$tmp_mods ; do echo $$i-clean ; done )"; echo $$mods )'
OUR_INSTALL_MODS='$$(if test -z "$(MODULES)" ; then tmp_mods="$(CONF_MODULES)"; else tmp_mods="$(MODULES)" ; fi ; mods="$$(for i in $$tmp_mods ; do echo $$i-install ; done)"; echo $$mods )'
OUR_UNINSTALL_MODS='$$(if test -z "$(MODULES)" ; then tmp_mods="$(CONF_MODULES)"; else tmp_mods="$(MODULES)" ; fi ; mods="$$(for i in $$tmp_mods ; do echo $$i-uninstall ; done)"; echo $$mods )'
OUR_DISABLED_MODS='$$(tmp_mods="$(CONF_DISABLED_MODULES)"; mods="$$(for i in $$tmp_mods ; do echo $$i-all ; done )"; echo $$mods )'
OUR_DISABLED_CLEAN_MODS='$$(tmp_mods="$(CONF_DISABLED_MODULES)"; mods="$$(for i in $$tmp_mods ; do echo $$i-clean ; done )"; echo $$mods )'
OUR_DISABLED_INSTALL_MODS='$$(tmp_mods="$(CONF_DISABLED_MODULES)"; mods="$$(for i in $$tmp_mods ; do echo $$i-install ; done)"; echo $$mods )'
OUR_DISABLED_UNINSTALL_MODS='$$(tmp_mods="$(CONF_DISABLED_MODULES)"; mods="$$(for i in $$tmp_mods ; do echo $$i-uninstall ; done)"; echo $$mods )'
AM_MAKEFLAGS='"OUR_MODULES=$(OUR_MODS)" "OUR_CLEAN_MODULES=$(OUR_CLEAN_MODS)" "OUR_INSTALL_MODULES=$(OUR_INSTALL_MODS)" "OUR_UNINSTALL_MODULES=$(OUR_UNINSTALL_MODS)" "OUR_DISABLED_MODULES=$(OUR_DISABLED_MODS)" "OUR_DISABLED_CLEAN_MODULES=$(OUR_DISABLED_CLEAN_MODS)" "OUR_DISABLED_INSTALL_MODULES=$(OUR_DISABLED_INSTALL_MODS)" "OUR_DISABLED_UNINSTALL_MODULES=$(OUR_DISABLED_UNINSTALL_MODS)" `test -n "$(VERBOSE)" || echo -s`'
#AM_MAKEFLAGS='`test -n "$(VERBOSE)" || echo -s`'
AC_SUBST(LIBTOOL)
AC_SUBST(TOUCH_TARGET)
AC_SUBST(CONF_DISABLED_MODULES)
AC_SUBST(CONF_MODULES)
AC_SUBST(OUR_MODS)
AC_SUBST(OUR_CLEAN_MODS)
AC_SUBST(OUR_INSTALL_MODS)
AC_SUBST(OUR_UNINSTALL_MODS)
AC_SUBST(OUR_DISABLED_MODS)
AC_SUBST(OUR_DISABLED_CLEAN_MODS)
AC_SUBST(OUR_DISABLED_INSTALL_MODS)
AC_SUBST(OUR_DISABLED_UNINSTALL_MODS)
AC_SUBST(AM_MAKEFLAGS)
ac_configure_args="$ac_configure_args CONFIGURE_CFLAGS='$CFLAGS' CONFIGURE_CXXFLAGS='$CXXFLAGS' CONFIGURE_LDFLAGS='$LDFLAGS' "
# --prefix='$prefix' --exec_prefix='$exec_prefix' --libdir='$libdir' --libexecdir='$libexecdir' --bindir='$bindir' --sbindir='$sbindir' \
# --localstatedir='$localstatedir' --datadir='$datadir'"
# Run configure in all the subdirs
AC_CONFIG_SUBDIRS([libs/srtp])
AC_CONFIG_SUBDIRS([libs/sqlite])
if test "$enable_core_libedit_support" = "yes" ; then
AC_CONFIG_SUBDIRS([libs/libedit])
fi
AC_CONFIG_SUBDIRS([libs/pcre])
AC_CONFIG_SUBDIRS([libs/apr])
AC_CONFIG_SUBDIRS([libs/apr-util])
AC_CONFIG_SUBDIRS([libs/ilbc])
AC_CONFIG_SUBDIRS([libs/curl])
AC_CONFIG_SUBDIRS([libs/iksemel])
AC_CONFIG_SUBDIRS([libs/js/nsprpub])
AC_CONFIG_SUBDIRS([libs/js])
AC_CONFIG_SUBDIRS([libs/libdingaling])
AC_CONFIG_SUBDIRS([libs/libsndfile])
AC_CONFIG_SUBDIRS([libs/sofia-sip])
AC_CONFIG_SUBDIRS([libs/speex])
AC_CONFIG_SUBDIRS([libs/portaudio])
AC_CONFIG_SUBDIRS([libs/openzap])
AC_CONFIG_SUBDIRS([libs/unimrcp])
AC_CONFIG_SUBDIRS([libs/tiff-3.8.2])
AC_CONFIG_SUBDIRS([libs/spandsp])
AC_CONFIG_SUBDIRS([libs/broadvoice])
AC_CONFIG_SUBDIRS([libs/libg722_1])
AC_CONFIG_SUBDIRS([libs/silk])
case $host in
*-openbsd*)
# libtool won't link static libs against shared ones on OpenBSD unless we tell it not to be stupid
AC_CONFIG_COMMANDS([hacklibtool], [cp libtool libtool.orig && sed -e "s/deplibs_check_method=.*/deplibs_check_method=pass_all/g" libtool.orig > libtool])
;;
esac
AC_OUTPUT
##
## Configuration summary
##
echo
echo "-------------------------- FreeSWITCH configuration --------------------------"
echo ""
echo " Locations:"
echo " Selected layout: ${layout_name}"
echo ""
echo " prefix: ${prefix}"
echo " exec_prefix: ${exec_prefix}"
echo " bindir: ${bindir}"
echo " libdir: ${libdir}"
echo " modulesdir: ${modulesdir}"
echo " sysconfdir: ${sysconfdir}"
echo " runtimedir: ${runtimedir}"
echo " logfiledir: ${logfiledir}"
echo ""
echo "------------------------------------------------------------------------------"